Index: firmware/App/Controllers/DialInFlow.c
===================================================================
diff -u -r8466e63f95f65a3ffb18c3af85ac99328e41167b -re64816def7cd98e7dcb6d133b3a56c9fea835af3
--- firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 8466e63f95f65a3ffb18c3af85ac99328e41167b)
+++ firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision e64816def7cd98e7dcb6d133b3a56c9fea835af3)
@@ -63,8 +63,8 @@
 #define DIP_SPEED_CALC_BUFFER_LEN            ( 1000 / DIP_SPEED_CALC_INTERVAL / TASK_PRIORITY_INTERVAL )
 #define DIP_HALL_EDGE_COUNTS_PER_REV         48              ///< Number of hall sensor edge counts per motor revolution.
 
-#define DIP_MAX_FLOW_RATE                   1320.0           ///< Maximum measured BP flow rate allowed.
-#define DIP_MIN_FLOW_RATE                  -1320.0           ///< Minimum measured BP flow rate allowed.
+#define DIP_MAX_FLOW_RATE                    1320.0          ///< Maximum measured BP flow rate allowed.
+#define DIP_MIN_FLOW_RATE                   -1320.0          ///< Minimum measured BP flow rate allowed.
 #define DIP_MAX_FLOW_VS_SPEED_DIFF_RPM       200.0           ///< Maximum difference between measured motor speed and speed implied by measured flow.
 #define DIP_MAX_MOTOR_SPEED_WHILE_OFF_RPM    100.0           ///< Maximum motor speed (RPM) while motor is commanded off.
 #define DIP_MAX_ROTOR_VS_MOTOR_DIFF_RPM      5.0             ///< Maximum difference in speed between motor and rotor (in rotor RPM).