Index: firmware/App/Controllers/DialInFlow.c
===================================================================
diff -u -rc05775820109b5e83596c58a3b4248ac6cdb1d65 -r5cc3d018b1d6e0f0177a69d1e7108af13aaa240a
--- firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision c05775820109b5e83596c58a3b4248ac6cdb1d65)
+++ firmware/App/Controllers/DialInFlow.c	(.../DialInFlow.c)	(revision 5cc3d018b1d6e0f0177a69d1e7108af13aaa240a)
@@ -280,8 +280,10 @@
     // Direction change while pump is running is not allowed
     if ( ( FALSE == isDialInPumpOn ) || ( 0 == flowRate ) || ( dir == dialInPumpDirectionSet ) )
     {
+#ifndef NO_PUMP_FLOW_LIMITS
         // Verify flow rate
-        if ( flowRate <= MAX_DIAL_IN_FLOW_RATE )
+        if ( flowRate <= MAX_DIAL_IN_FLOW_RATE )
+#endif
         {
             resetDialInFlowMovingAverage();
             targetDialInFlowRate = ( dir == MOTOR_DIR_FORWARD ? (S32)flowRate : (S32)flowRate * -1 );
@@ -320,10 +322,12 @@
             }
             result = TRUE;
         }
+#ifndef NO_PUMP_FLOW_LIMITS
         else  // Requested flow rate too high
         {
             SET_ALARM_WITH_2_U32_DATA( ALARM_ID_HD_SOFTWARE_FAULT, SW_FAULT_ID_DIAL_IN_FLOW_SET_TOO_HIGH, flowRate )
-        }
+        }
+#endif
     }
 
     return result;