Index: firmware/App/Controllers/DialOutFlow.c
===================================================================
diff -u -r04bb279c0d98ebdfd341a857588c8fb80c3fb564 -r1a685471524555a374854c0c9ec8e208e71fe2df
--- firmware/App/Controllers/DialOutFlow.c	(.../DialOutFlow.c)	(revision 04bb279c0d98ebdfd341a857588c8fb80c3fb564)
+++ firmware/App/Controllers/DialOutFlow.c	(.../DialOutFlow.c)	(revision 1a685471524555a374854c0c9ec8e208e71fe2df)
@@ -8,7 +8,7 @@
 * @file DialOutFlow.c
 *
 * @author (last) Sean Nash
-* @date (last) 08-Sep-2020
+* @date (last) 13-Oct-2020
 *
 * @author (original) Sean
 * @date (original) 24-Jan-2020
@@ -188,9 +188,8 @@
 /*********************************************************************//**
  * @brief
  * The initDialOutFlow function initializes the DialOutFlow module.
- * @details
- * Inputs : none
- * Outputs : DialOutFlow module initialized.
+ * @details Inputs: none
+ * @details Outputs: DialOutFlow module initialized.
  * @return none
  *************************************************************************/
 void initDialOutFlow( void )
@@ -227,9 +226,8 @@
  * @brief
  * The setDialOutPumpTargetRate function sets a new target flow rate, pump
  * direction, and control mode.
- * @details
- * Inputs : isDialOutPumpOn, dialOutPumpDirectionSet
- * Outputs : targetDialOutFlowRate, dialOutPumpdirection, dialOutPumpPWMDutyCyclePct
+ * @details Inputs: isDialOutPumpOn, dialOutPumpDirectionSet
+ * @details Outputs: targetDialOutFlowRate, dialOutPumpdirection, dialOutPumpPWMDutyCyclePct
  * @param flowRate new target dialysate outlet flow rate
  * @param dir new dialysate outlet flow direction
  * @param mode new control mode
@@ -300,9 +298,8 @@
  * @brief
  * The setDialOutUFVolumes function sets the ultrafiltration reference and
  * measured total volumes (in mL).
- * @details
- * Inputs : none
- * Outputs : referenceUFVolumeInMl and totalMeasuredUFVolumeInMl
+ * @details Inputs: none
+ * @details Outputs: referenceUFVolumeInMl and totalMeasuredUFVolumeInMl
  * @param refVol New ultrafiltration reference volume (in mL)
  * @param totVol New ultrafiltration total volume (in mL)
  * @return none
@@ -317,9 +314,8 @@
  * @brief
  * The signalDialOutPumpHardStop function stops the dialysate outlet pump
  * immediately.
- * @details
- * Inputs : none
- * Outputs : Dialysate outlet pump stopped, set point reset, state changed to off
+ * @details Inputs: none
+ * @details Outputs: Dialysate outlet pump stopped, set point reset, state changed to off
  * @return none
  *************************************************************************/
 void signalDialOutPumpHardStop( void )
@@ -337,9 +333,8 @@
  * The signalDialOutPumpRotorHallSensor function handles the dialysate outlet
  * pump rotor hall sensor detection.  Calculates rotor speed (in RPM).
  * Stops pump if there is a pending request to home the pump.
- * @details
- * Inputs : dopRotorRevStartTime, dopStopAtHomePosition
- * Outputs : dopRotorRevStartTime, dialOutPumpRotorSpeedRPM
+ * @details Inputs: dopRotorRevStartTime, dopStopAtHomePosition
+ * @details Outputs: dopRotorRevStartTime, dialOutPumpRotorSpeedRPM
  * @return none
  *************************************************************************/
 void signalDialOutPumpRotorHallSensor( void )
@@ -362,9 +357,8 @@
 /*********************************************************************//**
  * @brief
  * The homeDialOutPump function initiates a dialysate outlet pump home operation.
- * @details
- * Inputs : dialOutPumpState
- * Outputs : dopStopAtHomePosition, dopHomeStartTime, dialysate outlet pump started (slow)
+ * @details Inputs: dialOutPumpState
+ * @details Outputs: dopStopAtHomePosition, dopHomeStartTime, dialysate outlet pump started (slow)
  * @return none
  *************************************************************************/
 BOOL homeDialOutPump( void )
@@ -398,9 +392,8 @@
  * @brief
  * The setDialOutUFVolumes function sets the ultrafiltration reference and
  * measured total volumes (in mL).
- * @details
- * Inputs : none
- * Outputs : loadCellWeightInGrams[]
+ * @details Inputs: none
+ * @details Outputs: loadCellWeightInGrams[]
  * @param res1Primary New weight from primary load cell of reservoir 1
  * @param res1Backup New weight from backup load cell of reservoir 1
  * @param res2Primary New weight from primary load cell of reservoir 2
@@ -424,9 +417,8 @@
  * The execDialOutFlowMonitor function executes the dialysate outlet pump
  * and load cell sensor monitor.  Checks are performed.  Data is published
  * at appropriate interval.
- * @details
- * Inputs : latest sensor data
- * Outputs : dialOutPumpMCSpeedRPM, dialOutPumpMCCurrentmA
+ * @details Inputs: latest sensor data
+ * @details Outputs: dialOutPumpMCSpeedRPM, dialOutPumpMCCurrentmA
  * @return none
  *************************************************************************/
 void execDialOutFlowMonitor( void )
@@ -460,9 +452,8 @@
  * @brief
  * The execDialOutFlowController function executes the dialysate outlet pump
  * ultrafiltration controller state machine.
- * @details
- * Inputs : dialOutPumpState
- * Outputs : dialOutPumpState
+ * @details Inputs: dialOutPumpState
+ * @details Outputs: dialOutPumpState
  * @return none
  *************************************************************************/
 void execDialOutFlowController( void )
@@ -495,9 +486,8 @@
  * @brief
  * The handleDialOutPumpOffState function handles the dialOut pump off state
  * of the dialOut pump controller state machine.
- * @details
- * Inputs : targetDialOutFlowRate, dialOutPumpDirection
- * Outputs : dialOutPumpPWMDutyCyclePctSet, dialOutPumpDirectionSet, isDialOutPumpOn
+ * @details Inputs: targetDialOutFlowRate, dialOutPumpDirection
+ * @details Outputs: dialOutPumpPWMDutyCyclePctSet, dialOutPumpDirectionSet, isDialOutPumpOn
  * @return next state
  *************************************************************************/
 static DIAL_OUT_PUMP_STATE_T handleDialOutPumpOffState( void )
@@ -528,9 +518,8 @@
  * @brief
  * The handleDialOutPumpRampingUpState function handles the ramp up state
  * of the dialOut pump controller state machine.
- * @details
- * Inputs : dialOutPumpPWMDutyCyclePctSet
- * Outputs : dialOutPumpPWMDutyCyclePctSet
+ * @details Inputs: dialOutPumpPWMDutyCyclePctSet
+ * @details Outputs: dialOutPumpPWMDutyCyclePctSet
  * @return next state
  *************************************************************************/
 static DIAL_OUT_PUMP_STATE_T handleDialOutPumpRampingUpState( void )
@@ -572,9 +561,8 @@
  * @brief
  * The handleDialOutPumpRampingDownState function handles the ramp down state
  * of the dialOut pump controller state machine.
- * @details
- * Inputs : dialOutPumpPWMDutyCyclePctSet
- * Outputs : dialOutPumpPWMDutyCyclePctSet
+ * @details Inputs: dialOutPumpPWMDutyCyclePctSet
+ * @details Outputs: dialOutPumpPWMDutyCyclePctSet
  * @return next state
  *************************************************************************/
 static DIAL_OUT_PUMP_STATE_T handleDialOutPumpRampingDownState( void )
@@ -614,9 +602,8 @@
  * @brief
  * The handleDialOutPumpControlToTargetState function handles the "control to
  * target" state of the dialOut pump controller state machine.
- * @details
- * Inputs : dopControlTimerCounter, dialOutPumpControlModeSet, volumes.
- * Outputs : dopControlTimerCounter, pump controlled.
+ * @details Inputs: dopControlTimerCounter, dialOutPumpControlModeSet, volumes.
+ * @details Outputs: dopControlTimerCounter, pump controlled.
  * @return next state
  *************************************************************************/
 static DIAL_OUT_PUMP_STATE_T handleDialOutPumpControlToTargetState( void )
@@ -655,9 +642,8 @@
  * @brief
  * The setDialOutPumpControlSignalPWM function set the PWM duty cycle of
  * the dialysate outlet pump to a given %.
- * @details
- * Inputs : none
- * Outputs : dialysis outlet pump PWM duty cycle is set.
+ * @details Inputs: none
+ * @details Outputs: dialysis outlet pump PWM duty cycle is set.
  * @param newPWM A percentage duty cycle between 0.0 and 1.0
  * @return none
  *************************************************************************/
@@ -670,9 +656,8 @@
  * @brief
  * The stopDialOutPump function sets the dialout flow stop signal and PWM
  * duty cycle to 0.0.
- * @details
- * Inputs : none
- * Outputs : dialOut pump stop signal activated, PWM duty cycle zeroed
+ * @details Inputs: none
+ * @details Outputs: dialOut pump stop signal activated, PWM duty cycle zeroed
  * @return none
  *************************************************************************/
 static void stopDialOutPump( void )
@@ -686,9 +671,8 @@
 /*********************************************************************//**
  * @brief
  * The releaseDialOutPumpStop function clears the dialysate outlet pump stop signal.
- * @details
- * Inputs : none
- * Outputs : dialysate outlet pump stop signal is cleared.
+ * @details Inputs: none
+ * @details Outputs: dialysate outlet pump stop signal is cleared.
  * @return none
  *************************************************************************/
 static void releaseDialOutPumpStop( void )
@@ -700,9 +684,8 @@
  * @brief
  * The setDialOutPumpDirection function sets the set dialOut pump direction to
  * the given direction.
- * @details
- * Inputs : none
- * Outputs : dialOutPumpDirectionSet, pump direction signal set to match given direction.
+ * @details Inputs: none
+ * @details Outputs: dialOutPumpDirectionSet, pump direction signal set to match given direction.
  * @param dir dialysate outlet pump direction to set
  * @return none
  *************************************************************************/
@@ -730,9 +713,8 @@
  * @brief
  * The publishDialOutFlowData function publishes dialysate outlet data at
  * the set interval.
- * @details
- * Inputs : Dialysate outlet pump data
- * Outputs : Dialysate outlet pump data is published to CAN bus.
+ * @details Inputs: Dialysate outlet pump data
+ * @details Outputs: Dialysate outlet pump data is published to CAN bus.
  * @return none
  *************************************************************************/
 static void publishDialOutFlowData( void )
@@ -758,9 +740,8 @@
  * The updateDialOutPumpSpeedAndDirectionFromHallSensors function calculates
  * the dialysate outlet pump motor speed and direction from hall sensor counter on
  * a 1 second interval.
- * @details
- * Inputs : dopLastMotorHallSensorCount, dopMotorSpeedCalcTimerCtr, current count from FPGA
- * Outputs : dialOutPumpSpeedRPM
+ * @details Inputs: dopLastMotorHallSensorCount, dopMotorSpeedCalcTimerCtr, current count from FPGA
+ * @details Outputs: dopMotorDirectionFromHallSensors, dialOutPumpSpeedRPM
  * @return none
  *************************************************************************/
 static void updateDialOutPumpSpeedAndDirectionFromHallSensors( void )
@@ -795,9 +776,8 @@
  * The checkDialOutPumpRotor function checks the rotor for the dialysate outlet
  * pump.  If homing, this function will stop when hall sensor detected.  If pump
  * is off or running very slowly, rotor speed will be set to zero.
- * @details
- * Inputs : dopStopAtHomePosition, dopHomeStartTime, dopRotorRevStartTime
- * Outputs : pump may be stopped if homing, dialOutPumpRotorSpeedRPM may be set to zero.
+ * @details Inputs: dopStopAtHomePosition, dopHomeStartTime, dopRotorRevStartTime
+ * @details Outputs: pump may be stopped if homing, dialOutPumpRotorSpeedRPM may be set to zero.
  * @return none
  *************************************************************************/
 static void checkDialOutPumpRotor( void )
@@ -821,9 +801,8 @@
  * @brief
  * The checkDialOutPumpDirection function checks the set direction vs.
  * the direction implied by the sign of the measured MC speed.
- * @details
- * Inputs : adcDialOutPumpMCSpeedRPM, dialOutPumpDirectionSet, dialOutPumpState
- * Outputs : none
+ * @details Inputs: adcDialOutPumpMCSpeedRPM, dialOutPumpDirectionSet, dialOutPumpState
+ * @details Outputs: none
  * @return none
  *************************************************************************/
 static void checkDialOutPumpDirection( void )
@@ -874,9 +853,8 @@
  * 2. while pump is controlling, measured motor speed should be within allowed range of measured motor controller speed.
  * 3. measured motor speed should be within allowed range of measured rotor speed.
  * All 3 checks have a persistence time that must be met before an alarm is triggered.
- * @details
- * Inputs : targetDialOutFlowRate, dialOutPumpSpeedRPM, dialOutPumpRotorSpeedRPM
- * Outputs : alarm(s) may be triggered
+ * @details Inputs: targetDialOutFlowRate, dialOutPumpSpeedRPM, dialOutPumpRotorSpeedRPM
+ * @details Outputs: alarm(s) may be triggered
  * @return none
  *************************************************************************/
 static void checkDialOutPumpSpeeds( void )
@@ -955,9 +933,8 @@
  * @brief
  * The checkDialOutPumpMCCurrent function checks the measured MC current vs.
  * the set state of the dialOut pump (stopped or running).
- * @details
- * Inputs : dialOutPumpState, dopCurrErrorDurationCtr, adcDialOutPumpMCCurrentmA
- * Outputs : none
+ * @details Inputs: dialOutPumpState, dopCurrErrorDurationCtr, adcDialOutPumpMCCurrentmA
+ * @details Outputs: none
  * @return none
  *************************************************************************/
 static void checkDialOutPumpMCCurrent( void )
@@ -1013,9 +990,8 @@
  * @brief
  * The getPublishDialOutFlowDataInterval function gets the dialysate out flow
  * data publication interval.
- * @details
- * Inputs : dialOutDataPublishInterval
- * Outputs : none
+ * @details Inputs: dialOutDataPublishInterval
+ * @details Outputs: none
  * @return the current dialysate out flow data publication interval (in ms).
  *************************************************************************/
 static U32 getPublishDialOutDataInterval( void )
@@ -1033,9 +1009,8 @@
 /*********************************************************************//**
  * @brief
  * The getLoadCellWeightInGrams function gets the load cell weight.
- * @details
- * Inputs : loadCellWeightInGrams
- * Outputs : none
+ * @details Inputs: loadCellWeightInGrams
+ * @details Outputs: none
  * @param loadCellID ID of load cell to get
  * @return the current load cell weight in grams
  *************************************************************************/
@@ -1065,9 +1040,8 @@
 /*********************************************************************//**
  * @brief
  * The getTotalTargetDialOutUFVolumeInMl function gets the target UF volume.
- * @details
- * Inputs : referenceUFVolumeInMl
- * Outputs : none
+ * @details Inputs: referenceUFVolumeInMl
+ * @details Outputs: none
  * @return the current target UF volume in mL.
  *************************************************************************/
 F32 getTotalTargetDialOutUFVolumeInMl( void )
@@ -1085,9 +1059,8 @@
 /*********************************************************************//**
  * @brief
  * The getTotalMeasuredUFVolumeInMl function gets the measured UF volume.
- * @details
- * Inputs : totalMeasuredUFVolumeInMl
- * Outputs : none
+ * @details Inputs: totalMeasuredUFVolumeInMl
+ * @details Outputs: none
  * @return the current UF volume (in mL).
  *************************************************************************/
 F32 getTotalMeasuredUFVolumeInMl( void )
@@ -1106,9 +1079,8 @@
  * @brief
  * The getMeasuredDialOutPumpRotorSpeed function gets the measured dialysate
  * outlet pump rotor speed.
- * @details
- * Inputs : dialOutPumpRotorSpeedRPM
- * Outputs : none
+ * @details Inputs: dialOutPumpRotorSpeedRPM
+ * @details Outputs: none
  * @return the current dialysate outlet pump rotor speed (in RPM).
  *************************************************************************/
 F32 getMeasuredDialOutPumpRotorSpeed( void )
@@ -1127,9 +1099,8 @@
  * @brief
  * The getMeasuredDialOutPumpSpeed function gets the measured dialysate outlet
  * pump motor speed.
- * @details
- * Inputs : dialOutPumpSpeedRPM
- * Outputs : none
+ * @details Inputs: dialOutPumpSpeedRPM
+ * @details Outputs: none
  * @return the current dialysate outlet pump motor speed (in RPM).
  *************************************************************************/
 F32 getMeasuredDialOutPumpSpeed( void )
@@ -1148,9 +1119,8 @@
  * @brief
  * The getMeasuredDialOutPumpMCSpeed function gets the measured dialOut pump
  * speed.
- * @details
- * Inputs : dialOutPumpMCSpeedRPM
- * Outputs : none
+ * @details Inputs: dialOutPumpMCSpeedRPM
+ * @details Outputs: none
  * @return the current dialOut pump speed (in RPM).
  *************************************************************************/
 F32 getMeasuredDialOutPumpMCSpeed( void )
@@ -1169,9 +1139,8 @@
  * @brief
  * The getMeasuredDialOutPumpMCCurrent function gets the measured dialOut pump
  * current.
- * @details
- * Inputs : dialOutPumpMCCurrentmA
- * Outputs : none
+ * @details Inputs: dialOutPumpMCCurrentmA
+ * @details Outputs: none
  * @return the current dialOut pump current (in mA).
  *************************************************************************/
 F32 getMeasuredDialOutPumpMCCurrent( void )
@@ -1196,9 +1165,8 @@
  * @brief
  * The testSetDialOutPumpAndLoadCellDataPublishIntervalOverride function overrides the
  * dialout data publish interval.
- * @details
- * Inputs : none
- * Outputs : dialOutDataPublishInterval
+ * @details Inputs: none
+ * @details Outputs: dialOutDataPublishInterval
  * @param value override dialout data publish interval with (in ms)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1222,9 +1190,8 @@
  * @brief
  * The testResetDialOutPumpAndLoadCellDataPublishIntervalOverride function resets the override
  * of the dialout data publish interval.
- * @details
- * Inputs : none
- * Outputs : dialOutDataPublishInterval
+ * @details Inputs: none
+ * @details Outputs: dialOutDataPublishInterval
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetDialOutPumpAndLoadCellDataPublishIntervalOverride( void )
@@ -1245,9 +1212,8 @@
  * @brief
  * The testSetTargetDialOutFlowRateOverride function overrides the target
  * dialysate outlet flow rate.
- * @details
- * Inputs : none
- * Outputs : pump started w/ set target rate and control mode
+ * @details Inputs: none
+ * @details Outputs: pump started w/ set target rate and control mode
  * @param value override target dialysate outlet flow rate (in mL/min)
  * @param ctrlMode override pump control mode to this mode (0 = closed loop, 1 = open loop)
  * @return TRUE if override successful, FALSE if not
@@ -1281,9 +1247,8 @@
  * @brief
  * The testResetTargetDialOutFlowRateOverride function resets the override of the
  * target dialysate outlet flow rate.
- * @details
- * Inputs : none
- * Outputs : pump stopped
+ * @details Inputs: none
+ * @details Outputs: pump stopped
  * @return TRUE if override reset successful, FALSE if not
  *************************************************************************/
 BOOL testResetTargetDialOutFlowRateOverride( void )
@@ -1302,9 +1267,8 @@
  * @brief
  * The testSetDialOutUFRefVolumeOverride function overrides the target
  * dialout vol rate.
- * @details
- * Inputs : referenceUFVolumeInMl
- * Outputs : referenceUFVolumeInMl
+ * @details Inputs: referenceUFVolumeInMl
+ * @details Outputs: referenceUFVolumeInMl
  * @param value override target dialout vol rate (in mL/min)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1326,9 +1290,8 @@
  * @brief
  * The testResetDialOutUFRefVolumeOverride function resets the override of the
  * target dialout vol rate.
- * @details
- * Inputs : referenceUFVolumeInMl
- * Outputs : referenceUFVolumeInMl
+ * @details Inputs: referenceUFVolumeInMl
+ * @details Outputs: referenceUFVolumeInMl
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetDialOutUFRefVolumeOverride( void )
@@ -1349,9 +1312,8 @@
  * @brief
  * The testSetDialOutUFTotVolumeOverride function overrides the measured
  * dialout vol rate.
- * @details
- * Inputs : totalMeasuredUFVolumeInMl
- * Outputs : totalMeasuredUFVolumeInMl
+ * @details Inputs: totalMeasuredUFVolumeInMl
+ * @details Outputs: totalMeasuredUFVolumeInMl
  * @param value override measured dialout vol rate (in mL/min)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1373,9 +1335,8 @@
  * @brief
  * The testResetDialOutUFTotVolumeOverride function resets the override of the
  * measured dialout vol rate.
- * @details
- * Inputs : totalMeasuredUFVolumeInMl
- * Outputs : totalMeasuredUFVolumeInMl
+ * @details Inputs: totalMeasuredUFVolumeInMl
+ * @details Outputs: totalMeasuredUFVolumeInMl
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetDialOutUFTotVolumeOverride( void )
@@ -1396,9 +1357,8 @@
  * @brief
  * The testSetMeasuredDialOutPumpRotorSpeedOverride function overrides the measured
  * dialOut pump rotor speed.
- * @details
- * Inputs : DialOutPumpRotorSpeedRPM
- * Outputs : DialOutPumpRotorSpeedRPM
+ * @details Inputs: DialOutPumpRotorSpeedRPM
+ * @details Outputs: DialOutPumpRotorSpeedRPM
  * @param value override measured dialOut pump rotor speed (in RPM)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1420,9 +1380,8 @@
  * @brief
  * The testResetMeasuredDialOutPumpRotorSpeedOverride function resets the override of the
  * measured dialOut pump rotor speed.
- * @details
- * Inputs : DialOutPumpRotorSpeedRPM
- * Outputs : DialOutPumpRotorSpeedRPM
+ * @details Inputs: DialOutPumpRotorSpeedRPM
+ * @details Outputs: DialOutPumpRotorSpeedRPM
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetMeasuredDialOutPumpRotorSpeedOverride( void )
@@ -1443,9 +1402,8 @@
  * @brief
  * The testSetMeasuredDialOutPumpSpeedOverride function overrides the measured
  * dialOut pump motor speed.
- * @details
- * Inputs : dialOutPumpSpeedRPM
- * Outputs : dialOutPumpSpeedRPM
+ * @details Inputs: dialOutPumpSpeedRPM
+ * @details Outputs: dialOutPumpSpeedRPM
  * @param value override measured dialOut pump motor speed (in RPM)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1467,9 +1425,8 @@
  * @brief
  * The testResetMeasuredDialOutPumpSpeedOverride function resets the override of the
  * measured dialOut pump motor speed.
- * @details
- * Inputs : dialOutPumpSpeedRPM
- * Outputs : dialOutPumpSpeedRPM
+ * @details Inputs: dialOutPumpSpeedRPM
+ * @details Outputs: dialOutPumpSpeedRPM
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetMeasuredDialOutPumpSpeedOverride( void )
@@ -1490,9 +1447,8 @@
  * @brief
  * The testSetMeasuredDialOutPumpMCSpeedOverride function overrides the measured
  * dialOut pump motor speed.
- * @details
- * Inputs : dialOutPumpMCSpeedRPM
- * Outputs : dialOutPumpMCSpeedRPM
+ * @details Inputs: dialOutPumpMCSpeedRPM
+ * @details Outputs: dialOutPumpMCSpeedRPM
  * @param value override measured dialOut pump speed (in RPM)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1514,9 +1470,8 @@
  * @brief
  * The testResetMeasuredDialOutPumpMCSpeedOverride function resets the override of the
  * measured dialOut pump motor speed.
- * @details
- * Inputs : dialOutPumpMCSpeedRPM
- * Outputs : dialOutPumpMCSpeedRPM
+ * @details Inputs: dialOutPumpMCSpeedRPM
+ * @details Outputs: dialOutPumpMCSpeedRPM
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetMeasuredDialOutPumpMCSpeedOverride( void )
@@ -1537,9 +1492,8 @@
  * @brief
  * The testSetMeasuredDialOutPumpMCCurrentOverride function overrides the measured
  * dialOut pump motor current.
- * @details
- * Inputs : dialOutPumpMCCurrentmA
- * Outputs : dialOutPumpMCCurrentmA
+ * @details Inputs: dialOutPumpMCCurrentmA
+ * @details Outputs: dialOutPumpMCCurrentmA
  * @param value override measured dialOut pump current (in mA)
  * @return TRUE if override successful, FALSE if not
  *************************************************************************/
@@ -1561,9 +1515,8 @@
  * @brief
  * The testResetMeasuredDialOutPumpMCCurrentOverride function resets the override of the
  * measured dialOut pump motor current.
- * @details
- * Inputs : dialOutPumpMCCurrentmA
- * Outputs : dialOutPumpMCCurrentmA
+ * @details Inputs: dialOutPumpMCCurrentmA
+ * @details Outputs: dialOutPumpMCCurrentmA
  * @return TRUE if reset override successful, FALSE if not
  *************************************************************************/
 BOOL testResetMeasuredDialOutPumpMCCurrentOverride( void )
@@ -1584,9 +1537,8 @@
  * @brief
  * The testSetDialOutLoadCellWeightOverride function overrides the value of the
  * load cell sensor with a given weight (in grams).
- * @details
- * Inputs : loadCellWeightInGrams[]
- * Outputs : loadCellWeightInGrams[]
+ * @details Inputs: loadCellWeightInGrams[]
+ * @details Outputs: loadCellWeightInGrams[]
  * @param sensor ID of load cell sensor to override weight for
  * @param value override weight (in grams) for the given sensor
  * @return TRUE if override successful, FALSE if not
@@ -1612,9 +1564,8 @@
  * @brief
  * The testResetDialOutLoadCellWeightOverride function resets the override of the
  * load cell sensor.
- * @details
- * Inputs : loadCellWeightInGrams[]
- * Outputs : loadCellWeightInGrams[]
+ * @details Inputs: loadCellWeightInGrams[]
+ * @details Outputs: loadCellWeightInGrams[]
  * @param sensor  ID of load cell sensor to override weight for
  * @return TRUE if reset successful, FALSE if not
  *************************************************************************/