Index: firmware/App/Controllers/DialOutFlow.c
===================================================================
diff -u -rb61c8330905634762e69ed10fb6614a77552fd54 -r7593a04d1121869dffb536f31c20c57cf571611b
--- firmware/App/Controllers/DialOutFlow.c	(.../DialOutFlow.c)	(revision b61c8330905634762e69ed10fb6614a77552fd54)
+++ firmware/App/Controllers/DialOutFlow.c	(.../DialOutFlow.c)	(revision 7593a04d1121869dffb536f31c20c57cf571611b)
@@ -1161,53 +1161,49 @@
 {
     F32 dopCurr;
 
-    // only check current when we have A/C power
-    if ( getCPLDACPowerLossDetected() != TRUE )
+    // DialOut pump should be off
+    if ( DIAL_OUT_PUMP_OFF_STATE == dialOutPumpState )
     {
-        // DialOut pump should be off
-        if ( DIAL_OUT_PUMP_OFF_STATE == dialOutPumpState )
+        dopCurr = fabs( getMeasuredDialOutPumpMCCurrent() );
+        if ( dopCurr > DOP_MAX_CURR_WHEN_STOPPED_MA )
         {
-            dopCurr = fabs( getMeasuredDialOutPumpMCCurrent() );
-            if ( dopCurr > DOP_MAX_CURR_WHEN_STOPPED_MA )
+            dopCurrErrorDurationCtr += TASK_PRIORITY_INTERVAL;
+            if ( dopCurrErrorDurationCtr > DOP_MAX_CURR_ERROR_DURATION_MS )
             {
-                dopCurrErrorDurationCtr += TASK_PRIORITY_INTERVAL;
-                if ( dopCurrErrorDurationCtr > DOP_MAX_CURR_ERROR_DURATION_MS )
-                {
 #ifndef _RELEASE_
-                    if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_MOTOR_CURRNT_CHECKS ) != SW_CONFIG_ENABLE_VALUE )
+                if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_MOTOR_CURRNT_CHECKS ) != SW_CONFIG_ENABLE_VALUE )
 #endif
-                    {
-                        SET_ALARM_WITH_1_F32_DATA( ALARM_ID_HD_DIAL_OUT_PUMP_MC_CURRENT_CHECK, getMeasuredDialOutPumpMCCurrent() );
-                    }
+                {
+                    SET_ALARM_WITH_1_F32_DATA( ALARM_ID_HD_DIAL_OUT_PUMP_MC_CURRENT_CHECK, getMeasuredDialOutPumpMCCurrent() );
                 }
             }
-            else
-            {
-                dopCurrErrorDurationCtr = 0;
-            }
         }
-        // DialOut pump should be running
         else
         {
-            dopCurr = fabs( getMeasuredDialOutPumpMCCurrent() );
-            if ( dopCurr > DOP_MAX_CURR_WHEN_RUNNING_MA )
+            dopCurrErrorDurationCtr = 0;
+        }
+    }
+    // DialOut pump should be running
+    else
+    {
+        dopCurr = fabs( getMeasuredDialOutPumpMCCurrent() );
+        if ( dopCurr > DOP_MAX_CURR_WHEN_RUNNING_MA )
+        {
+            dopCurrErrorDurationCtr += TASK_PRIORITY_INTERVAL;
+            if ( dopCurrErrorDurationCtr > DOP_MAX_CURR_ERROR_DURATION_MS )
             {
-                dopCurrErrorDurationCtr += TASK_PRIORITY_INTERVAL;
-                if ( dopCurrErrorDurationCtr > DOP_MAX_CURR_ERROR_DURATION_MS )
+#ifndef _RELEASE_
+                if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_MOTOR_CURRNT_CHECKS ) != SW_CONFIG_ENABLE_VALUE )
+#endif
                 {
-    #ifndef _RELEASE_
-                    if ( getSoftwareConfigStatus( SW_CONFIG_DISABLE_MOTOR_CURRNT_CHECKS ) != SW_CONFIG_ENABLE_VALUE )
-    #endif
-                    {
-                        SET_ALARM_WITH_1_F32_DATA( ALARM_ID_HD_DIAL_OUT_PUMP_MC_CURRENT_CHECK, getMeasuredDialOutPumpMCCurrent() );
-                    }
+                    SET_ALARM_WITH_1_F32_DATA( ALARM_ID_HD_DIAL_OUT_PUMP_MC_CURRENT_CHECK, getMeasuredDialOutPumpMCCurrent() );
                 }
             }
-            else
-            {
-                dopCurrErrorDurationCtr = 0;
-            }
         }
+        else
+        {
+            dopCurrErrorDurationCtr = 0;
+        }
     }
 }