Index: firmware/App/HDCommon.h
===================================================================
diff -u -r1c1a8d0528f19da5d94bdf75f687bbb1d1de6f0e -rc539499ea2dee6d62194d573ac93b313d9e2936d
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 1c1a8d0528f19da5d94bdf75f687bbb1d1de6f0e)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision c539499ea2dee6d62194d573ac93b313d9e2936d)
@@ -41,17 +41,17 @@
     #define DISABLE_AIR_TRAP_LEVELING       1           // Disable air trap level control
 //    #define DISABLE_3WAY_VALVES             1           // Disable 3-way valves
 //    #define TST_3WAY_VALVES_ALWAYS_OPEN     1           // After POST and homing, open all 4 valves
-    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
-    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
-    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
+//    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
+//    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
+//    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
 //    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
 //    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
 //    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
 //    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
 //    #define DISABLE_SALINE_BOLUS_CHECKS     1           // Do not error on HD saline bolus checks
-//    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
+    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
-//    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
+    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
 //    #define RAW_FLOW_SENSOR_DATA            1           // Test build will not filter flow sensor data
 //    #define READ_FPGA_ASYNC_DATA            1           // Test build reads non-priority register page every other time