Index: firmware/App/HDCommon.h
===================================================================
diff -u -r563f516a81cb41290008f93b33e7cf5e121717db -rc05775820109b5e83596c58a3b4248ac6cdb1d65
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 563f516a81cb41290008f93b33e7cf5e121717db)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision c05775820109b5e83596c58a3b4248ac6cdb1d65)
@@ -43,18 +43,18 @@
     #define DISABLE_AIR_TRAP_LEVELING_ALARM 1           // Disable air trap level control alarms
 //    #define DISABLE_3WAY_VALVES             1           // Disable 3-way valves
 //    #define TST_3WAY_VALVES_ALWAYS_OPEN     1           // After POST and homing, open all 4 valves
-    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
+//    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
 //    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
 //    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
-    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
-    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
-    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
-    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
+//    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
+//    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
+//    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
+//    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
 //    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
-    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
+//    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
-    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
+//    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
     #define DISABLE_CAL_CHECK               1           // Disable calibration checks
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
 //    #define RAW_FLOW_SENSOR_DATA            1           // Test build will not filter flow sensor data
@@ -73,10 +73,10 @@
 //    #define DISABLE_BATT_COMM               1           // Disable battery communication.
     #define SKIP_AIR_BUBBLE_CHECK           1           // Skip air bubble detector self-test.
     #define DISABLE_OCCLUSION_SELF_TEST     1           // Skip occlusion sensor self-test.
-    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
-    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
+//    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
+//    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
-    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
+//    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
 
     #include <stdio.h>
     #include <strings.h>