Index: firmware/App/HDCommon.h
===================================================================
diff -u -r7de1ffc01a8b979c8e9c1bb9020a768ab62f0320 -r2c162a8b414b9eeb48ac7bbbcfc1671cf4b21b01
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 7de1ffc01a8b979c8e9c1bb9020a768ab62f0320)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 2c162a8b414b9eeb48ac7bbbcfc1671cf4b21b01)
@@ -1,17 +1,17 @@
 /**************************************************************************
 *
-* Copyright (c) 2019-2020 Diality Inc. - All Rights Reserved.
+* Copyright (c) 2019-2021 Diality Inc. - All Rights Reserved.
 *
 * THIS CODE MAY NOT BE COPIED OR REPRODUCED IN ANY FORM, IN PART OR IN
 * WHOLE, WITHOUT THE EXPLICIT PERMISSION OF THE COPYRIGHT OWNER.
 *
-* @file HDCommon.h
+* @file    HDCommon.h
 *
-* @author (last) Sean Nash
-* @date (last) 14-Oct-2020
+* @author  (last) Sean Nash
+* @date    (last) 14-Oct-2020
 *
-* @author (original) Sean
-* @date (original) 27-Feb-2020
+* @author  (original) Sean
+* @date    (original) 27-Feb-2020
 *
 ***************************************************************************/
 
@@ -25,7 +25,7 @@
 #define HD_VERSION_MAJOR        0
 #define HD_VERSION_MINOR        6
 #define HD_VERSION_MICRO        0
-#define HD_VERSION_BUILD        0
+#define HD_VERSION_BUILD        107
 
 // ********** development build switches **********
 
@@ -50,15 +50,16 @@
 //    #define RUN_BP_OPEN_LOOP                1           // Run blood pump in open loop mode
 //    #define RUN_DPI_OPEN_LOOP               1           // Run dialysate inlet pump in open loop mode
     #define WORN_OUT_CARTRIDGE              1           // Running with an old worn out cartridge (max wear)
-    #define PBA_ESTIMATION                  1           // Estimate arterial pressure rather than look at PBA sensor
+//    #define PBA_ESTIMATION                  1           // Estimate arterial pressure rather than look at PBA sensor
     #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
     #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
     #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
     #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
-    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
+//    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
-//    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
-//    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
+    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
+    #define DISABLE_DIALYSATE_TEMP_CHECK    1           // Disable dialysate temperature check
+    #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
     #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
     #define SKIP_CAL_CHECK                  1           //
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
@@ -71,11 +72,11 @@
     #define DISABLE_OCCLUSION_SELF_TEST     1           // Skip occlusion sensor self-test.
 //    #define SKIP_CARTRIDGE_REMOVAL          1           // Skip cartridge removal check
 //    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
-//    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
+    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
-    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
+//    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
 //    #define NO_PUMP_FLOW_LIMITS             1           // Allow any commanded flow rate for peristaltic pumps
-//    #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
+    #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
     #define DISABLE_UI_POST_TEST            1           // Disable the UI POST
 //    #define DISABLE_UI_COMM_TO_ALARM        1           // Disable UI comm timeouts