Index: firmware/App/HDCommon.h
===================================================================
diff -u -r8acad167bcf7ad07043192007e59d253a5216e3a -rafa9d4924d55ac4fc98270a012e92dd1f6ee65d0
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 8acad167bcf7ad07043192007e59d253a5216e3a)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision afa9d4924d55ac4fc98270a012e92dd1f6ee65d0)
@@ -47,15 +47,15 @@
 //    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
 //    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
 //    #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
-//    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
-//    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
-//    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
-//    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
+    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
+    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
+    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
+    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
     #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
     #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
-//    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
+    #define DISABLE_VALVE_ALARMS            1           // Do not error on HD valve position
     #define DISABLE_CAL_CHECK               1           // Disable calibration checks
     #define DISABLE_DIALYSATE_TEMP_CHECK    1           // Disable dialysate temperature check
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
@@ -64,7 +64,7 @@
 //    #define EMC_TEST_BUILD                  1           // EMC test build - HD/DG run separately but connected, HD pumps toggle on/off w/ stop button
     #define ALARMS_DEBUG                    1           // Triggered alarms sent to debug UART
     #define ALARM_VOLUME_DEFAULT_LOW        1           // Set default alarm volume to lowest
-    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
+//    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
 //    #define V2_0_SYSTEM                     1           // Build for v2.0 system
     #define DISABLE_BATT_COMM               1           // Disable battery communication.
     #define SKIP_AIR_BUBBLE_CHECK           1           // Skip air bubble detector self-test.
@@ -73,7 +73,10 @@
 //    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
 //    #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
-//    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
+    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
+//    #define NO_PUMP_FLOW_LIMITS             1           // Allow any commanded flow rate for peristaltic pumps
+    #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
+    #define DISABLE_UI_POST_TEST            1           // Disable the UI POST
 
     // Skip Pre-Treatment and get to treatment as soon as possible
 //    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.