Index: firmware/App/HDCommon.h =================================================================== diff -u -r8cebc7f282f403c99f712d422454c15414b6fc73 -re1b010909170d0656a7b87400f295387423fd383 --- firmware/App/HDCommon.h (.../HDCommon.h) (revision 8cebc7f282f403c99f712d422454c15414b6fc73) +++ firmware/App/HDCommon.h (.../HDCommon.h) (revision e1b010909170d0656a7b87400f295387423fd383) @@ -46,14 +46,14 @@ // #define DISABLE_ACCELS 1 // Disable accelerometer POST and monitoring // #define DISABLE_CRC_ERROR 1 // Do not error on bad CRC for CAN messages #define DISABLE_ACK_ERRORS 1 // Do not error on failure of other node(s) to ACK a message - #define USE_FMD_FLOW_SENSOR 1 // Use FMD flow sensor (on HD) instead of FMD on DG +// #define USE_FMD_FLOW_SENSOR 1 // Use FMD flow sensor (on HD) instead of FMD on DG // #define RUN_BP_OPEN_LOOP 1 // Run blood pump in open loop mode // #define RUN_DPI_OPEN_LOOP 1 // Run dialysate inlet pump in open loop mode #define WORN_OUT_CARTRIDGE 1 // Running with an old worn out cartridge (max wear) #define DISABLE_MOTOR_CURRENT_CHECKS 1 // Do not error on HD pump current checks #define DISABLE_PUMP_FLOW_CHECKS 1 // Do not error on HD pump flow checks #define DISABLE_PUMP_SPEED_CHECKS 1 // Do not error on HD pump speed checks -// #define DISABLE_PUMP_DIRECTION_CHECKS 1 // Do not error on HD pump direction checks + #define DISABLE_PUMP_DIRECTION_CHECKS 1 // Do not error on HD pump direction checks #define DISABLE_SYRINGE_PUMP 1 // Disable syringe pump functionality #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS 1 // Allow syringe pump commands at any time except when pump is busy // #define DISABLE_PRESSURE_CHECKS 1 // Do not error on HD pressure checks