Index: firmware/App/HDCommon.h
===================================================================
diff -u -r933a18d740285e70be9d00696ed0f5a5381bc8e4 -rfbdff223ca110491c6f7776669fa46ac5fc56da4
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 933a18d740285e70be9d00696ed0f5a5381bc8e4)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision fbdff223ca110491c6f7776669fa46ac5fc56da4)
@@ -25,7 +25,7 @@
 #define HD_VERSION_MAJOR        0
 #define HD_VERSION_MINOR        4
 #define HD_VERSION_MICRO        5
-#define HD_VERSION_BUILD        11
+#define HD_VERSION_BUILD        0
 
 // ********** development build switches **********
 
@@ -42,17 +42,17 @@
     #define DISABLE_AIR_TRAP_LEVELING       1           // disable air trap level control
 //    #define DISABLE_3WAY_VALVES             1           // disable 3-way valves
 //    #define TST_3WAY_VALVES_ALWAYS_OPEN     1           // after POST and homing, open all 4 valves
-    #define DISABLE_ACCELS                  1           // disable accelerometer POST and monitoring
-    #define DISABLE_CRC_ERROR               1           // do not error on bad CRC for CAN messages
-    #define DISABLE_ACK_ERRORS              1           // do not error on failure of other node(s) to ACK a message
-    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // do not error on HD pump current checks
-    #define DISABLE_PUMP_FLOW_CHECKS        1           // do not error on HD pump flow checks
-    #define DISABLE_PUMP_SPEED_CHECKS       1           // do not error on HD pump speed checks
-    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // do not error on HD pump direction checks
-    #define DISABLE_SALINE_BOLUS_CHECKS     1           // do not error on HD saline bolus checks
-    #define DISABLE_PRESSURE_CHECKS         1           // do not error on HD pressure checks
-    #define DISABLE_UF_ALARMS               1           // do not error on HD ultrafiltration checks
-    #define DISABLE_VALVE_ALARMS            1           // do not error on HD valve position
+//    #define DISABLE_ACCELS                  1           // disable accelerometer POST and monitoring
+//    #define DISABLE_CRC_ERROR               1           // do not error on bad CRC for CAN messages
+//    #define DISABLE_ACK_ERRORS              1           // do not error on failure of other node(s) to ACK a message
+//    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // do not error on HD pump current checks
+//    #define DISABLE_PUMP_FLOW_CHECKS        1           // do not error on HD pump flow checks
+//    #define DISABLE_PUMP_SPEED_CHECKS       1           // do not error on HD pump speed checks
+//    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // do not error on HD pump direction checks
+//    #define DISABLE_SALINE_BOLUS_CHECKS     1           // do not error on HD saline bolus checks
+//    #define DISABLE_PRESSURE_CHECKS         1           // do not error on HD pressure checks
+//    #define DISABLE_UF_ALARMS               1           // do not error on HD ultrafiltration checks
+//    #define DISABLE_VALVE_ALARMS            1           // do not error on HD valve position
 //    #define RUN_PUMPS_OPEN_LOOP             1           // BP and DPi pumps will be run open loop (no flow sensor feedback)
 //    #define RAW_FLOW_SENSOR_DATA            1           // test build will not filter flow sensor data
 //    #define READ_FPGA_ASYNC_DATA            1           // test build reads non-priority register page every other time