Index: firmware/App/HDCommon.h
===================================================================
diff -u -rdcbab8b274234441a7ac12ad9ce54251d65f3911 -r32ab412c13ed14609dc20fe020ea01a2ef6dcf17
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision dcbab8b274234441a7ac12ad9ce54251d65f3911)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 32ab412c13ed14609dc20fe020ea01a2ef6dcf17)
@@ -51,11 +51,13 @@
 //    #define RUN_DPI_OPEN_LOOP               1           // Run dialysate inlet pump in open loop mode
     #define WORN_OUT_CARTRIDGE              1           // Running with an old worn out cartridge (max wear)
 //    #define PBA_ESTIMATION                  1           // Estimate arterial pressure rather than look at PBA sensor
-//    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
-//    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
-//    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
-//    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
+
+    #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
+    #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
+    #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
+    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
     #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
+
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
     #define DISABLE_PRESSURE_CHECKS         1           // Do not error on HD pressure checks
 //    #define DISABLE_ARTERIAL_PRESSURE_CHECK 1           // Do not error on arterial pressure out of range
@@ -78,7 +80,7 @@
 //    #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
     #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
-    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
+//    #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
     #define NO_PUMP_FLOW_LIMITS             1           // Allow any commanded flow rate for peristaltic pumps
     #define DISABLE_BUBBLE_ALARMS           1           // Disable bubble alarms
     #define DISABLE_UI_POST_TEST            1           // Disable the UI POST