Index: firmware/App/Modes/ModeFault.c
===================================================================
diff -u -rba15d3e6250e8cd3cd3ef39cb64a93f91c3caba2 -raa0c1b0150e1eeb2ff5f7cac8715ecacb6aca119
--- firmware/App/Modes/ModeFault.c	(.../ModeFault.c)	(revision ba15d3e6250e8cd3cd3ef39cb64a93f91c3caba2)
+++ firmware/App/Modes/ModeFault.c	(.../ModeFault.c)	(revision aa0c1b0150e1eeb2ff5f7cac8715ecacb6aca119)
@@ -96,35 +96,32 @@
     {
         if ( stop != button_state )
         {
-            toggle = INC_WRAP( toggle, 0, 3 );
+            toggle = INC_WRAP( toggle, 0, 2 );
             switch ( toggle )
             {
                 case 0: // Pumps and valves off
+                    setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+                    setDialInPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+                    setDialOutPumpTargetRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                     setValvePosition( VDI, VALVE_POSITION_C_CLOSE );
                     setValvePosition( VDO, VALVE_POSITION_C_CLOSE );
                     setValvePosition( VBA, VALVE_POSITION_C_CLOSE );
                     setValvePosition( VBV, VALVE_POSITION_C_CLOSE );
                     break;
 
-                case 1: // Pumps on, valves off
+                case 1: // Pumps off, valves in pos A
+                    setValvePosition( VDI, VALVE_POSITION_A_INSERT_EJECT );
+                    setValvePosition( VDO, VALVE_POSITION_A_INSERT_EJECT );
+                    setValvePosition( VBA, VALVE_POSITION_A_INSERT_EJECT );
+                    setValvePosition( VBV, VALVE_POSITION_A_INSERT_EJECT );
+                    break;
+
+                case 2: // Pumps on, valves in pos A
                     setBloodPumpTargetFlowRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                     setDialInPumpTargetFlowRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                     setDialOutPumpTargetRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                     break;
 
-                case 2: // Pumps on, valves on
-                    setValvePosition( VDI, VALVE_POSITION_B_OPEN );
-                    setValvePosition( VDO, VALVE_POSITION_B_OPEN );
-                    setValvePosition( VBA, VALVE_POSITION_B_OPEN );
-                    setValvePosition( VBV, VALVE_POSITION_B_OPEN );
-                    break;
-
-                case 3: // Pumps off, valves on
-                    setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                    setDialInPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                    setDialOutPumpTargetRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                    break;
-
                 default: // Should not get here, reset if we do
                     toggle = 0;
                     setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );