Index: firmware/App/Modes/ModePreTreat.c
===================================================================
diff -u -r39e2d7a0d208e1e79e4add6aad51035fac777c3e -r5a0c073ece70cd2457fb4f6f941dab11d68e82f4
--- firmware/App/Modes/ModePreTreat.c	(.../ModePreTreat.c)	(revision 39e2d7a0d208e1e79e4add6aad51035fac777c3e)
+++ firmware/App/Modes/ModePreTreat.c	(.../ModePreTreat.c)	(revision 5a0c073ece70cd2457fb4f6f941dab11d68e82f4)
@@ -7,8 +7,8 @@
 *
 * @file    ModePreTreat.c
 *
-* @author  (last)      Sean Nash
-* @date    (last)      20-Apr-2023
+* @author  (last)      Dara Navaei
+* @date    (last)      04-May-2023
 *
 * @author  (original)  Dara Navaei
 * @date    (original)  05-Nov-2019
@@ -48,11 +48,11 @@
 #define PRE_TREATMENT_FLUSH_FILL_TARGET_TEMP_C        45.0F             ///< Pre treatment flush fill target temperature in C.
 #define PRE_TREATMENT_NORMAL_FILL_TARGET_TEMP_C       ( 37.0F + 2.0F )  ///< Pre treatment normal fill target temperature in C.
 
-#define PRE_TREATMENT_MIN_FILL_RESERVOIR_VOLUME_ML      500             ///< Fill reservoir to this volume minimum to prep volume during development.
-#define PRE_TREATMENT_FLUSH_RESERVOIR_VOLUME_ML         500             ///< Fill reservoir to this volume (in mL) to flush filter and lines.
-#define PRE_TREATMENT_FILL_RESERVOIR_ONE_VOLUME_ML      1300            ///< Fill reservoir one to this volume (in mL) during pre-treatment mode.
-#define PRE_TREATMENT_FILL_RESERVOIR_TWO_VOLUME_ML      600             ///< Fill reservoir two to this volume (in mL) during pre-treatment mode.
-#define PRE_TREATMENT_FULL_RESERVOIR_VOLUME_ML          1500            ///< Fill reservoir to this volume minimum to prep volume during development.
+#define PRE_TREATMENT_MIN_FILL_RESERVOIR_VOLUME_ML    500               ///< Fill reservoir to this volume minimum to prep volume during development.
+#define PRE_TREATMENT_FLUSH_RESERVOIR_VOLUME_ML       500               ///< Fill reservoir to this volume (in mL) to flush filter and lines.
+#define PRE_TREATMENT_FILL_RESERVOIR_ONE_VOLUME_ML    1300              ///< Fill reservoir one to this volume (in mL) during pre-treatment mode.
+#define PRE_TREATMENT_FILL_RESERVOIR_TWO_VOLUME_ML    750               ///< Fill reservoir two to this volume (in mL) during pre-treatment mode.
+#define PRE_TREATMENT_FULL_RESERVOIR_VOLUME_ML        1500              ///< Fill reservoir to this volume minimum to prep volume during development.
 
 #define PRE_TREATMENT_FLUSH_COUNT                     2                 ///< Number of flush cycles for each reservoir.
 
@@ -757,12 +757,8 @@
             fillReservoirOneStartRequested = TRUE;
             transitionToNoCartSelfTests();
         }
-#ifndef _RELEASE_
-        if ( SW_CONFIG_DISABLE_VALUE == getSoftwareConfigStatus( SW_CONFIG_DISABLE_AIR_PUMP ) )  // Allow reservoir flushes now if air pump not disabled
-#endif
-        {
-            signalAllowDGFlushFills();
-        }
+
+        signalAllowDGFlushFills();
     }
 
     return state;