Index: firmware/App/Modes/ModeStandby.c
===================================================================
diff -u -r6419179374edcd65da462de84e8aeaefb7e20320 -r1eac55db00559965a7dc6752fc42a2c54d56f4b9
--- firmware/App/Modes/ModeStandby.c	(.../ModeStandby.c)	(revision 6419179374edcd65da462de84e8aeaefb7e20320)
+++ firmware/App/Modes/ModeStandby.c	(.../ModeStandby.c)	(revision 1eac55db00559965a7dc6752fc42a2c54d56f4b9)
@@ -31,6 +31,8 @@
 #include "OperationModes.h"
 #include "SystemComm.h"
 #include "SystemCommMessages.h"
+#include "TaskGeneral.h"
+#include "Timers.h"
 #ifdef EMC_TEST_BUILD     // TODO - test code
 #include "FPGA.h"
 #endif
@@ -42,14 +44,30 @@
 
 // ********** private definitions **********
 
+#define DISINFECTS_DATA_PUB_INTERVAL          ( 1 * MS_PER_SECOND / TASK_GENERAL_INTERVAL )    ///< Disinfects data publish interval in counts.
+
 // ********** private data **********
 
-static HD_STANDBY_STATE_T currentStandbyState;                      ///< Current state (sub-mode) of standby mode.
+static HD_STANDBY_STATE_T currentStandbyState;                                                 ///< Current state (sub-mode) of standby mode.
 
-static BOOL treatStartReqReceived = FALSE;                          ///< Flag indicates user has requested initiation of a treatment
+static BOOL treatStartReqReceived = FALSE;                                                     ///< Flag indicates user has requested initiation of a treatment.
+static BOOL flushStartReqReceived = FALSE;                                                     ///< Flag indicates user has requested initiation of flush mode.
+static BOOL heatDisinfectStartReqReceived = FALSE;                                             ///< Flag indicates user has requested initiation of heat disinfect mode.
+static BOOL chemDisinfectStartReqReceived = FALSE;                                             ///< Flag indicates user has requested initiation of chemical disinfect mode.
+static U32 dataPublishCounter = 0;                                                             ///< Disinfects data publish counter.
+static BOOL hasDisinfectCmdBeenSet = FALSE;                                                    ///< Flag indicates that a disinfect command has been set.
+static DG_DISINFECT_STATE_T dgDisinfectState;                                                  ///< DG disinfect state to be boadcast to UI.
 
 // ********** private function prototypes **********
 
+static HD_STANDBY_STATE_T handleStandbyModeWaitForTreatmentState( void );
+static HD_STANDBY_STATE_T handleStandbyModeWaitForDisinfectState( void );
+static HD_STANDBY_STATE_T handleStandbyModeDGFlushInProgressState( void );
+static HD_STANDBY_STATE_T handleStandbyModeDGHeatDisinfectInProgressState( void );
+static HD_STANDBY_STATE_T handleStandbyModeDGChemDisininfectInProgressState( void );
+
+static void publishDisinfectData( void );
+
 /*********************************************************************//**
  * @brief
  * The initStandbyMode function initializes the Standby Mode module.
@@ -59,8 +77,12 @@
  *************************************************************************/
 void initStandbyMode( void )
 {
-    currentStandbyState = STANDBY_START_STATE;
-    treatStartReqReceived = FALSE;
+    currentStandbyState    = STANDBY_START_STATE;
+    treatStartReqReceived  = FALSE;
+    flushStartReqReceived  = FALSE;
+    dataPublishCounter     = 0;
+    hasDisinfectCmdBeenSet = FALSE;
+    dgDisinfectState       = DG_DISINFECT_NOT_RUNNING_STATE;
 }
 
 /*********************************************************************//**
@@ -118,21 +140,27 @@
             break;
 
         case STANDBY_WAIT_FOR_TREATMENT_STATE:
-            if ( TRUE == treatStartReqReceived )
-            {
-                // Initialize treatment modes before starting a new treatment
-                initTreatParamsMode();
-                initPreTreatmentMode();
-                initTreatmentMode();
-                initPostTreatmentMode();
-                // Start treatment workflow with treatment parameters mode
-                requestNewOperationMode( MODE_TPAR );
-                treatStartReqReceived = FALSE;
-            }
+            currentStandbyState = handleStandbyModeWaitForTreatmentState();
             break;
 
+        case STANDBY_WAIT_FOR_DISINFECT_STATE:
+            currentStandbyState = handleStandbyModeWaitForDisinfectState();
+            break;
+
+        case STANDBY_DG_FLUSH_IN_PROGRESS_STATE:
+            currentStandbyState = handleStandbyModeDGFlushInProgressState();
+            break;
+
+        case STANDBY_DG_HEAT_DISINFECT_IN_PROGRESS_STATE:
+            currentStandbyState = handleStandbyModeDGHeatDisinfectInProgressState();
+            break;
+
+        case STANDBY_DG_CHEM_DISINFECT_IN_PROGRESS_STATE:
+            currentStandbyState = handleStandbyModeDGChemDisininfectInProgressState();
+            break;
+
         default:
-            // TODO - s/w fault
+            SET_ALARM_WITH_2_U32_DATA( ALARM_ID_HD_SOFTWARE_FAULT, SW_FAULT_ID_MODE_STANDBY_INVALID_STATE, currentStandbyState );
             currentStandbyState = STANDBY_START_STATE;
             break;
     }
@@ -147,6 +175,10 @@
             homeDialInPump();
             homeDialOutPump();
 #ifdef EMC_TEST_BUILD
+            setValvePosition( VDI, VALVE_POSITION_C_CLOSE );
+            setValvePosition( VDO, VALVE_POSITION_C_CLOSE );
+            setValvePosition( VBA, VALVE_POSITION_C_CLOSE );
+            setValvePosition( VBV, VALVE_POSITION_C_CLOSE );
             startAirTrapControl();
 #endif
             break;
@@ -160,44 +192,43 @@
             // TODO - test code
             if ( TRUE == stop )
             {
+#ifndef EMC_TEST_BUILD
                 treatStartReqReceived = FALSE;
                 setValvePosition( VDI, VALVE_POSITION_C_CLOSE );
                 setValvePosition( VDO, VALVE_POSITION_C_CLOSE );
                 setValvePosition( VBA, VALVE_POSITION_C_CLOSE );
                 setValvePosition( VBV, VALVE_POSITION_C_CLOSE );
                 requestNewOperationMode( MODE_TPAR );
-#ifdef EMC_TEST_BUILD
+#else
                 if ( stop != button_state )
                 {
                     toggle = INC_WRAP( toggle, 0, 3 );
                     switch ( toggle )
                     {
                         case 0: // Pumps and valves off
+                            setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+                            setDialInPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+                            setDialOutPumpTargetRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                             setValvePosition( VDI, VALVE_POSITION_C_CLOSE );
                             setValvePosition( VDO, VALVE_POSITION_C_CLOSE );
                             setValvePosition( VBA, VALVE_POSITION_C_CLOSE );
                             setValvePosition( VBV, VALVE_POSITION_C_CLOSE );
                             break;
 
-                        case 1: // Pumps on, valves off
-                            setBloodPumpTargetFlowRate( 200, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+                        case 1: // Pumps off, valves in pos A
+                            setValvePosition( VDI, VALVE_POSITION_A_INSERT_EJECT );
+                            setValvePosition( VDO, VALVE_POSITION_A_INSERT_EJECT );
+                            setValvePosition( VBA, VALVE_POSITION_A_INSERT_EJECT );
+                            setValvePosition( VBV, VALVE_POSITION_A_INSERT_EJECT );
+                            break;
+
+                        case 2: // Pumps on, valves in pos A
+                            setBloodPumpTargetFlowRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                             setDialInPumpTargetFlowRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                             setDialOutPumpTargetRate( 500, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
                             break;
 
-                        case 2: // Pumps on, valves on
-                            setValvePosition( VDI, VALVE_POSITION_B_OPEN );
-                            setValvePosition( VDO, VALVE_POSITION_B_OPEN );
-                            setValvePosition( VBA, VALVE_POSITION_B_OPEN );
-                            setValvePosition( VBV, VALVE_POSITION_B_OPEN );
-                            break;
 
-                        case 3: // Pumps off, valves on
-                            setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                            setDialInPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                            setDialOutPumpTargetRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
-                            break;
-
                         default: // Should not get here, reset if we do
                             toggle = 0;
                             setBloodPumpTargetFlowRate( 0, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
@@ -218,7 +249,7 @@
             break;
 
         default:
-            // TODO - s/w fault
+            SET_ALARM_WITH_2_U32_DATA( ALARM_ID_HD_SOFTWARE_FAULT, SW_FAULT_ID_MODE_STANDBY_INVALID_STATE, currentStandbyState );
             currentStandbyState = STANDBY_START_STATE;
             break;
     }
@@ -238,13 +269,179 @@
 BOOL signalUserInitiateTreatment( void )
 {
     BOOL result = FALSE;
+    REQUEST_REJECT_REASON_CODE_T rejReason = REQUEST_REJECT_REASON_NONE;
+
+    if ( TRUE == getNoNewTreatmentStatus() )
+    {
+        rejReason = REQUEST_REJECT_REASON_NO_NEW_TREATMENT_ALARM_TRIGGERED;
+    }
+
+    if ( ( MODE_STAN != getCurrentOperationMode() ) || ( STANDBY_WAIT_FOR_TREATMENT_STATE != currentStandbyState ) )
+    {
+        rejReason = REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE;
+    }
+
+    if ( TRUE != isDGCommunicating() )
+    {
+        rejReason = REQUEST_REJECT_REASON_DG_COMM_LOST;
+    }
+
+    if ( ( DG_MODE_STAN != getDGOpMode() ) || ( DG_STANDBY_MODE_STATE_IDLE != getDGSubMode() ) )
+    {
+        rejReason = REQUEST_REJECT_REASON_DG_NOT_IN_STANDBY_IDLE_STATE;
+    }
+
+    if ( REQUEST_REJECT_REASON_NONE == rejReason )
+    {
+        result = TRUE;
+        treatStartReqReceived = TRUE;
+    }
+
+    sendInitiateTreatmentResponseMsg( result, rejReason );
+
+    return result;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The signalAlarmActionToStandbyMode function executes the given alarm action
+ * as appropriate while in Standby Mode.
+ * @details Inputs: none
+ * @details Outputs: given alarm action executed
+ * @param action ID of alarm action to execute
+ * @return none
+ *************************************************************************/
+void signalAlarmActionToStandbyMode( ALARM_ACTION_T action )
+{
+    // Alarm actions not handled in Standby mode
+}
+
+/*********************************************************************//**
+ * @brief
+ * The signalUserInitiateFlushMode function handles user initiation of flush
+ * mode.
+ * @details Inputs: currentStandbyState
+ * @details Outputs: flushStartReqReceived
+ * @return TRUE if signal accepted, FALSE if not
+ *************************************************************************/
+BOOL signalUserInitiateFlushMode( void )
+{
+    BOOL result = FALSE;
     REQUEST_REJECT_REASON_CODE_T rejReason = REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE;
 
+    if ( MODE_STAN == getCurrentOperationMode() )
+    {
+        if ( ( STANDBY_WAIT_FOR_DISINFECT_STATE == currentStandbyState ) || ( STANDBY_WAIT_FOR_TREATMENT_STATE == currentStandbyState ) )
+        {
+            if ( TRUE == isDGCommunicating() )
+            {
+                flushStartReqReceived = TRUE;
+                result = TRUE;
+                currentStandbyState = STANDBY_WAIT_FOR_DISINFECT_STATE;
+                rejReason = REQUEST_REJECT_REASON_NONE;
+            }
+            else
+            {
+                rejReason = REQUEST_REJECT_REASON_DG_COMM_LOST;
+            }
+        }
+    }
+
+    sendDisinfectConfirmResponse( result, rejReason );
+
+    return result;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The signalUserInitiateFlushMode function handles user initiation of heat
+ * disinfect mode.
+ * @details Inputs: currentStandbyState
+ * @details Outputs: heatDisinfectStartReqReceived
+ * @return TRUE if signal accepted, FALSE if not
+ *************************************************************************/
+BOOL signalUserInitiateHeatDisinfectMode( void )
+{
+    BOOL result = FALSE;
+    REQUEST_REJECT_REASON_CODE_T rejReason = REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE;
+
+    if ( MODE_STAN == getCurrentOperationMode() )
+    {
+        if ( ( STANDBY_WAIT_FOR_DISINFECT_STATE == currentStandbyState ) || ( STANDBY_WAIT_FOR_TREATMENT_STATE == currentStandbyState ) )
+        {
+            if ( TRUE == isDGCommunicating() )
+            {
+                heatDisinfectStartReqReceived = TRUE;
+                result = TRUE;
+                currentStandbyState = STANDBY_WAIT_FOR_DISINFECT_STATE;
+                rejReason = REQUEST_REJECT_REASON_NONE;
+            }
+            else
+            {
+                rejReason = REQUEST_REJECT_REASON_DG_COMM_LOST;
+            }
+        }
+    }
+
+    sendDisinfectConfirmResponse( result, rejReason );
+
+    return result;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The signalUserInitiateChemicalDisinfectMode function handles user
+ * initiation of chemical disinfect mode.
+ * @details Inputs: currentStandbyState
+ * @details Outputs: chemDisinfectStartReqReceived
+ * @return TRUE if signal accepted, FALSE if not
+ *************************************************************************/
+BOOL signalUserInitiateChemicalDisinfectMode( void )
+{
+    BOOL result = FALSE;
+    REQUEST_REJECT_REASON_CODE_T rejReason = REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE;
+
+    if ( MODE_STAN == getCurrentOperationMode() )
+    {
+        if ( ( STANDBY_WAIT_FOR_DISINFECT_STATE == currentStandbyState ) || ( STANDBY_WAIT_FOR_TREATMENT_STATE == currentStandbyState ) )
+        {
+            if ( TRUE == isDGCommunicating() )
+            {
+                chemDisinfectStartReqReceived = TRUE;
+                result = TRUE;
+                currentStandbyState = STANDBY_WAIT_FOR_DISINFECT_STATE;
+                rejReason = REQUEST_REJECT_REASON_NONE;
+            }
+            else
+            {
+                rejReason = REQUEST_REJECT_REASON_DG_COMM_LOST;
+            }
+        }
+    }
+
+    sendDisinfectConfirmResponse( result, rejReason );
+
+    return result;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The signalInitiateStandbyDisinfectSubmode function handles user
+ * initiation of setting the disinfects submode.
+ * @details Inputs: currentStandbyState
+ * @details Outputs: currentStandbyState
+ * @return TRUE if signal accepted, FALSE if not
+ *************************************************************************/
+BOOL signalInitiateStandbyDisinfectSubmode( void )
+{
+    BOOL result = FALSE;
+    REQUEST_REJECT_REASON_CODE_T rejReason = REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE;
+
     if ( ( MODE_STAN == getCurrentOperationMode() ) && ( STANDBY_WAIT_FOR_TREATMENT_STATE == currentStandbyState ) )
     {
         if ( TRUE == isDGCommunicating() )
         {
-            treatStartReqReceived = TRUE;
+            currentStandbyState = STANDBY_WAIT_FOR_DISINFECT_STATE;
             result = TRUE;
             rejReason = REQUEST_REJECT_REASON_NONE;
         }
@@ -254,23 +451,206 @@
         }
     }
 
-    sendInitiateTreatmentResponseMsg( result, rejReason );
+    sendDisinfectConfirmResponse( result, rejReason );
 
     return result;
 }
 
+// ********** private functions **********
+
 /*********************************************************************//**
  * @brief
- * The signalAlarmActionToStandbyMode function executes the given alarm action
- * as appropriate while in Standby Mode.
+ * The handleStandbyModeWaitForTreatmentState function handles wait for
+ * treatment state.
+ * @details Inputs: treatStartReqReceived
+ * @details Outputs: treatStartReqReceived
+ * @return next state of the standby mode state machine
+ *************************************************************************/
+static HD_STANDBY_STATE_T handleStandbyModeWaitForTreatmentState( void )
+{
+    HD_STANDBY_STATE_T state = STANDBY_WAIT_FOR_TREATMENT_STATE;
+
+    if ( TRUE == treatStartReqReceived )
+    {
+        // Initialize treatment modes before starting a new treatment
+        initTreatParamsMode();
+        initPreTreatmentMode();
+        initTreatmentMode();
+        initPostTreatmentMode();
+        // Start treatment workflow with treatment parameters mode
+        requestNewOperationMode( MODE_TPAR );
+        treatStartReqReceived = FALSE;
+    }
+
+    return state;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The handleStandbyModeWaitForDisinfectState function handles wait for
+ * disinfect state.
+ * @details Inputs: flushStartReqReceived, heatDisinfectStartReqReceived,
+ * chemDisinfectStartReqReceived, hasDisinfectCmdBeenSet
+ * @details Outputs: flushStartReqReceived, heatDisinfectStartReqReceived,
+ * chemDisinfectStartReqReceived, hasDisinfectCmdBeenSet, dgDisinfectState,
+ * currentStandbyState
+ * @return next state of the standby mode state machine
+ *************************************************************************/
+static HD_STANDBY_STATE_T handleStandbyModeWaitForDisinfectState( void )
+{
+    HD_STANDBY_STATE_T state = STANDBY_WAIT_FOR_DISINFECT_STATE;
+
+    if ( TRUE == flushStartReqReceived )
+    {
+        if ( FALSE == hasDisinfectCmdBeenSet )
+        {
+            cmdStartDGFlush();
+            hasDisinfectCmdBeenSet = TRUE;
+        }
+        else if ( DG_MODE_FLUS == getDGOpMode() )
+        {
+            hasDisinfectCmdBeenSet = FALSE;
+            flushStartReqReceived = FALSE;
+            dgDisinfectState = DG_DISINFECT_FLUSH_STATE;
+            state = STANDBY_DG_FLUSH_IN_PROGRESS_STATE;
+        }
+    }
+    else if ( TRUE == heatDisinfectStartReqReceived )
+    {
+        if ( FALSE == hasDisinfectCmdBeenSet )
+        {
+            cmdStartDGHeatDisinfect();
+            hasDisinfectCmdBeenSet = TRUE;
+        }
+        else if ( DG_MODE_HEAT == getDGOpMode() )
+        {
+            hasDisinfectCmdBeenSet = FALSE;
+            heatDisinfectStartReqReceived = FALSE;
+            dgDisinfectState = DG_DISINFECT_HEAT_STATE;
+            state = STANDBY_DG_HEAT_DISINFECT_IN_PROGRESS_STATE;
+        }
+    }
+    else if ( TRUE == chemDisinfectStartReqReceived )
+    {
+        if ( FALSE == hasDisinfectCmdBeenSet )
+        {
+            cmdStartDGChemicalDisinfect();
+            hasDisinfectCmdBeenSet = TRUE;
+        }
+        else if ( DG_MODE_CHEM == getDGOpMode() )
+        {
+            hasDisinfectCmdBeenSet = FALSE;
+            chemDisinfectStartReqReceived = FALSE;
+            dgDisinfectState = DG_DISINFECT_CHEM_STATE;
+            state = STANDBY_DG_CHEM_DISINFECT_IN_PROGRESS_STATE;
+        }
+    }
+
+    return state;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The handleStandbyModeDGFlushInProgressState function handles DG flush
+ * in progress state.
  * @details Inputs: none
- * @details Outputs: given alarm action executed
- * @param action ID of alarm action to execute
- * @return none
+ * @details Outputs: dgDisinfectState, currentStandbyState
+ * @return next state of the standby mode state machine
  *************************************************************************/
-void signalAlarmActionToStandbyMode( ALARM_ACTION_T action )
+static HD_STANDBY_STATE_T handleStandbyModeDGFlushInProgressState( void )
 {
-    // Alarm actions not handled in Standby mode
+    HD_STANDBY_STATE_T state = STANDBY_DG_FLUSH_IN_PROGRESS_STATE;
+
+    if ( getDGOpMode() != DG_MODE_FLUS )
+    {
+        dgDisinfectState = DG_DISINFECT_NOT_RUNNING_STATE;
+        state = STANDBY_WAIT_FOR_TREATMENT_STATE;
+    }
+    publishDisinfectData();
+
+    return state;
 }
 
+/*********************************************************************//**
+ * @brief
+ * The handleStandbyModeDGHeatDisinfectInProgressState function handles DG
+ * heat disinfect in progress state.
+ * @details Inputs: none
+ * @details Outputs: dgDisinfectState, currentStandbyState
+ * @return next state of the standby mode state machine
+ *************************************************************************/
+static HD_STANDBY_STATE_T handleStandbyModeDGHeatDisinfectInProgressState( void )
+{
+    HD_STANDBY_STATE_T state = STANDBY_DG_HEAT_DISINFECT_IN_PROGRESS_STATE;
+
+    if ( getDGOpMode() != DG_MODE_HEAT )
+    {
+        dgDisinfectState = DG_DISINFECT_NOT_RUNNING_STATE;
+        state = STANDBY_WAIT_FOR_TREATMENT_STATE;
+    }
+    publishDisinfectData();
+
+    return state;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The handleStandbyModeDGChemDisininfectInProgressState function handles
+ * DG chemical disinfect in progress state.
+ * @details Inputs: none
+ * @details Outputs: dgDisinfectState, currentStandbyState
+ * @return next state of the standby mode state machine
+ *************************************************************************/
+static HD_STANDBY_STATE_T handleStandbyModeDGChemDisininfectInProgressState( void )
+{
+    HD_STANDBY_STATE_T state = STANDBY_DG_CHEM_DISINFECT_IN_PROGRESS_STATE;
+
+    if ( getDGOpMode() != DG_MODE_CHEM )
+    {
+        dgDisinfectState = DG_DISINFECT_NOT_RUNNING_STATE;
+        state = STANDBY_WAIT_FOR_TREATMENT_STATE;
+    }
+    publishDisinfectData();
+
+    return state;
+}
+
+/*********************************************************************//**
+ * @brief
+ * The publishDisinfectData function publishes disinfects data at
+ * the set interval.
+ * @details Inputs: dataPublishCounter
+ * @details Outputs: dataPublishCounter
+ * @return: none
+ *************************************************************************/
+static void publishDisinfectData( void )
+{
+    if ( ++dataPublishCounter > DISINFECTS_DATA_PUB_INTERVAL )
+    {
+        DG_DISINFECT_UI_STATES_T state = getDGDisinfectsStates();
+        DISINFECTS_DATA_T data;
+
+        switch( currentStandbyState )
+        {
+            case STANDBY_DG_FLUSH_IN_PROGRESS_STATE:
+                data.disinfectDGFlushState = state.flushUIState;
+                break;
+
+            case STANDBY_DG_HEAT_DISINFECT_IN_PROGRESS_STATE:
+                data.disinfectDGHeatState = state.heatDisinfectUIState;
+                break;
+
+            case STANDBY_DG_CHEM_DISINFECT_IN_PROGRESS_STATE:
+                data.disinfectDGChemState = state.chemDisinfectUIState;
+                break;
+        }
+
+        data.disinfectSubModeHDState = (U32)dgDisinfectState;
+
+        broadcastDisinfectsData( &data );
+
+        dataPublishCounter = 0;
+    }
+}
+
 /**@}*/