Index: firmware/App/Modes/ModeTreatment.c
===================================================================
diff -u -r87d315ee2269056a9ca4a023597e7a8dff7db90b -rf70ddc5911bffe11fc5e670c8566164af4b6c88f
--- firmware/App/Modes/ModeTreatment.c	(.../ModeTreatment.c)	(revision 87d315ee2269056a9ca4a023597e7a8dff7db90b)
+++ firmware/App/Modes/ModeTreatment.c	(.../ModeTreatment.c)	(revision f70ddc5911bffe11fc5e670c8566164af4b6c88f)
@@ -7,8 +7,8 @@
 *
 * @file    ModeTreatment.c
 *
-* @author  (last)      Dara Navaei
-* @date    (last)      08-Mar-2024
+* @author  (last)      Sean Nash
+* @date    (last)      22-Apr-2024
 *
 * @author  (original)  Dara Navaei
 * @date    (original)  05-Nov-2019
@@ -27,6 +27,8 @@
 #include "ModeTreatmentParams.h"
 #include "NVDataMgmt.h"
 #include "OperationModes.h"
+#include "PersistentAlarm.h"
+#include "PresOccl.h"
 #include "Reservoirs.h"
 #include "Rinseback.h"
 #include "RTC.h"
@@ -195,6 +197,11 @@
 
     treatmentStartTimeStamp = getRTCTimestamp();
     treatmentEndTimeStamp = 0;
+
+    // reset dialysate temperature alarm persistences prior to starting a treatment.
+    resetPersistentAlarmTimer( ALARM_ID_HD_DIALYSATE_TEMP_ABOVE_SAFETY_TEMP );
+    resetPersistentAlarmTimer( ALARM_ID_HD_DIALYSATE_TEMP_ABOVE_TARGET_TEMP );
+    resetPersistentAlarmTimer( ALARM_ID_HD_DIALYSATE_TEMP_BELOW_TARGET_TEMP );
 }
 
 /*********************************************************************//**
@@ -746,6 +753,8 @@
                 sendTreatmentLogEventData( UF_START_RESUME_EVENT, 0.0, presUFRate );
             }
             transitionToDialysis();
+            // To update partial blood pump occlusion baseline - start of treatment
+            signalBloodPumpPressureOcclBaseline();
             result = TREATMENT_DIALYSIS_STATE;
         }
     }
@@ -1025,23 +1034,24 @@
     {
         // Always adjust UF volume to accommodate treatment time change (not UF rate)
         F32 uFVolume          = ( (F32)( treatmentTime - CALC_ELAPSED_TREAT_TIME_IN_MIN() ) * presUFRate ) + getUltrafiltrationReferenceVolume();
+        F32 uFVolumeL         = uFVolume / ML_PER_LITER;
         U32 dialVolume        = getTreatmentParameterU32( TREATMENT_PARAM_DIALYSATE_FLOW ) * treatmentTime;   // In mL
         // The minimum treatment time is either in the range of the institutional record or the 1-minute treatment config has been requested which is an exception
         BOOL isMinTxTimeValid = ( ( treatmentTime >= getU32TreatmentParamLowerRangeLimit( TREATMENT_PARAM_TREATMENT_DURATION ) ) ||
                                   ( TRUE == getTestConfigStatus( TEST_CONFIG_ENABLE_ONE_MINUTE_TREATMENT ) ) ? TRUE : FALSE );
         BOOL isTxTimeValid    = ( ( TRUE == isMinTxTimeValid ) &&
                                   ( treatmentTime <= getU32TreatmentParamUpperRangeLimit( TREATMENT_PARAM_TREATMENT_DURATION ) ) ? TRUE : FALSE );
-        BOOL isMinUFVolValid  = ( ( uFVolume >= getF32TreatmentParamLowerRangeLimit( TREATMENT_PARAM_UF_VOLUME ) ) || ( uFVolume <= 0.0F ) ? TRUE : FALSE );
-        BOOL isUFVolValid     = ( ( TRUE == isMinUFVolValid ) && ( uFVolume <= getF32TreatmentParamUpperRangeLimit( TREATMENT_PARAM_UF_VOLUME ) ) ? TRUE : FALSE );
+        BOOL isMinUFVolValid  = ( ( uFVolumeL >= getF32TreatmentParamLowerRangeLimit( TREATMENT_PARAM_UF_VOLUME ) ) || ( uFVolumeL <= 0.0F ) ? TRUE : FALSE );
+        BOOL isUFVolValid     = ( ( TRUE == isMinUFVolValid ) && ( uFVolumeL <= getF32TreatmentParamUpperRangeLimit( TREATMENT_PARAM_UF_VOLUME ) ) ? TRUE : FALSE );
 
         if ( ( TRUE == isTxTimeValid ) && ( dialVolume <= MAX_DIALYSATE_VOLUME_ML ) && ( TRUE == isUFVolValid ) )
         {
             result = TRUE;
             sendTreatmentLogEventData( TREATMENT_DURATION_CHANGE_EVENT, ( presTreatmentTimeSecs / SEC_PER_MIN ), treatmentTime );
             presMaxUFVolumeML = uFVolume;
             presTreatmentTimeSecs = treatmentTime * SEC_PER_MIN;
-            result &= setTreatmentParameterF32( TREATMENT_PARAM_UF_VOLUME, ( presMaxUFVolumeML / (F32)ML_PER_LITER ) );
-            result &= setTreatmentParameterU32( TREATMENT_PARAM_TREATMENT_DURATION, ( presTreatmentTimeSecs / SEC_PER_MIN ) );
+            setTreatmentParameterF32( TREATMENT_PARAM_UF_VOLUME, ( presMaxUFVolumeML / (F32)ML_PER_LITER ) );
+            setTreatmentParameterU32( TREATMENT_PARAM_TREATMENT_DURATION, ( presTreatmentTimeSecs / SEC_PER_MIN ) );
             setDialysisDialInFlowAndUFRate( getTreatmentParameterU32( TREATMENT_PARAM_DIALYSATE_FLOW ), presMaxUFVolumeML, presUFRate );
             signalInitiatePressureStabilization( USE_NORMAL_STABILIZATION_PERIOD );
         }
@@ -1177,6 +1187,7 @@
         }
         // UF volume cannot be set lower than the UF volume that has already been collected
         else if ( ( uFVolume > ( getF32TreatmentParamUpperRangeLimit( TREATMENT_PARAM_UF_VOLUME ) * ML_PER_LITER ) ) ||
+                  ( uFVolume < ( getF32TreatmentParamLowerRangeLimit( TREATMENT_PARAM_UF_VOLUME ) * ML_PER_LITER ) ) ||
                   ( uFVolume <= colUFVol ) )
         {
             rejectReason = REQUEST_REJECT_REASON_UF_VOLUME_OUT_OF_RANGE;
@@ -1296,6 +1307,8 @@
                 // Set to new rate
                 result &= setTreatmentParameterU32( TREATMENT_PARAM_BLOOD_FLOW, bloodRate );
                 setDialysisBloodPumpFlowRate( getTreatmentParameterU32( TREATMENT_PARAM_BLOOD_FLOW ) );
+                // Update partial occlusion baseline when blood flow rate changes
+                signalBloodPumpPressureOcclBaseline();
             }
 
             // Handle dialysate flow rate changes
@@ -1306,6 +1319,8 @@
                 // Set to new rate
                 result &= setTreatmentParameterU32( TREATMENT_PARAM_DIALYSATE_FLOW, dialRate );
                 setDialysisDialInFlowAndUFRate( getTreatmentParameterU32( TREATMENT_PARAM_DIALYSATE_FLOW ), presMaxUFVolumeML, presUFRate );
+                // Update partial occlusion baseline when dialysate flow rate changes
+                signalBloodPumpPressureOcclBaseline();
             }
         }
         else