Index: firmware/App/Modes/Prime.c
===================================================================
diff -u -r2638aed3d414e7b14f309bdf05fa57d4141eb948 -r66da0a331c118550341c81098447d9fb8b7237e9
--- firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 2638aed3d414e7b14f309bdf05fa57d4141eb948)
+++ firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 66da0a331c118550341c81098447d9fb8b7237e9)
@@ -45,7 +45,7 @@
 
 #define DIALYSATE_PUMP_PRIME_FLOW_RATE_ML_MIN               300                                         ///< Dialysate pump flow rate during priming fluid path.
 #define LOAD_CELL_VOLUME_NOISE_TOLERANCE                    0.05                                        ///< Allow 5% tolerance on load cell readings.
-#define PRIME_SALINE_DIALYZER_STOP_WEIGHT                   200.0   // 10.0  try 200.0 11/19/2021 Sean  ///< Load cell readings of 10 grams ( 10 mL ) used in prime saline dialyzer state
+#define PRIME_SALINE_DIALYZER_STOP_WEIGHT                   50.0   // 10.0  try 200.0 11/19/2021 Sean  ///< Load cell readings of 10 grams ( 10 mL ) used in prime saline dialyzer state
 
 #define NO_AIR_DETECTED_COUNT                               ( 20 * MS_PER_SECOND )                      ///< No air detected time period count.
 #define PURGE_AIR_TIME_OUT_COUNT                            ( 60 * MS_PER_SECOND )                      ///< Time period count for purge air time out.
@@ -829,6 +829,11 @@
                 state = HD_PRIME_SALINE_SETUP_STATE;
                 break;
 
+            case HD_PRIME_SALINE_DIALYZER_SETUP_STATE:
+            case HD_PRIME_SALINE_DIALYZER_STATE:
+                state = HD_PRIME_SALINE_DIALYZER_SETUP_STATE;
+                break;
+
             case HD_PRIME_RESERVOIR_ONE_FILL_COMPLETE_STATE:
             case HD_PRIME_DIALYSATE_DIALYZER_STATE:
                 state = HD_PRIME_RESERVOIR_ONE_FILL_COMPLETE_STATE;