Index: firmware/App/Modes/Prime.c
===================================================================
diff -u -r4311dd4997aaaa97fe2a1878151145a92e5491e2 -r605aa855534046663dbd8e9505188fbe7d752985
--- firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 4311dd4997aaaa97fe2a1878151145a92e5491e2)
+++ firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 605aa855534046663dbd8e9505188fbe7d752985)
@@ -830,11 +830,9 @@
 
     signalDialOutPumpHardStop();
     signalDialInPumpHardStop();
-//    setBloodPumpTargetFlowRate( BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP ); // TODO - restore or remove
-    setBloodPumpTargetFlowRate( 100, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+    setBloodPumpTargetFlowRate( BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
 
-//    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN );
-    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / 100.0F );
+    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN );
     primeSalineDialyzerStartTime = getMSTimerCount();
 
     if ( TRUE == doesAlarmStatusIndicateStop() )
@@ -864,10 +862,10 @@
         state = HD_PRIME_RESERVOIR_TWO_FILL_COMPLETE_STATE;
     }
     // TODO: Rework alarm and timeout logic here. PRIME_SALINE_DIALYZER_TIME_OUT_COUNT may not be reached.
-//    if ( TRUE == didTimeout( primeSalineDialyzerStartTime, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT ) )
-//    {
-//        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_PRIME_SALINE_DIALYZER_TIME_OUT, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT );  // Trigger HD prime saline dialyzer time out alarm.
-//    }
+    if ( TRUE == didTimeout( primeSalineDialyzerStartTime, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT ) )
+    {
+        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_PRIME_SALINE_DIALYZER_TIME_OUT, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT );  // Trigger HD prime saline dialyzer time out alarm.
+    }
 
     if ( TRUE == doesAlarmStatusIndicateStop() )
     {