Index: firmware/App/Modes/Prime.c
===================================================================
diff -u -r8d44b80febc4574ce8f9adf91d04a6056c9de42e -refe47320b1747341b059a4d6e00f3b2b6c364025
--- firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 8d44b80febc4574ce8f9adf91d04a6056c9de42e)
+++ firmware/App/Modes/Prime.c	(.../Prime.c)	(revision efe47320b1747341b059a4d6e00f3b2b6c364025)
@@ -829,9 +829,11 @@
 
     signalDialOutPumpHardStop();
     signalDialInPumpHardStop();
-    setBloodPumpTargetFlowRate( BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
+//    setBloodPumpTargetFlowRate( BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP ); // TODO - restore or remove
+    setBloodPumpTargetFlowRate( 100, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_OPEN_LOOP );
 
-    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN );
+//    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN );
+    primeSalineDialyzerTimeLimit = (U32)( ( ( dialyzerDialysateVolume * DIALYZER_VOLUME_SCALE_FACTOR + DIALYZER_DVI_PATH_VOLUME_ML ) * SEC_PER_MIN * MS_PER_SECOND ) / 100.0F );
     primeSalineDialyzerStartTime = getMSTimerCount();
 
     if ( TRUE == doesAlarmStatusIndicateStop() )
@@ -861,10 +863,10 @@
         state = HD_PRIME_RESERVOIR_TWO_FILL_COMPLETE_STATE;
     }
     // TODO: Rework alarm and timeout logic here. PRIME_SALINE_DIALYZER_TIME_OUT_COUNT may not be reached.
-    if ( TRUE == didTimeout( primeSalineDialyzerStartTime, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT ) )
-    {
-        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_PRIME_SALINE_DIALYZER_TIME_OUT, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT );  // Trigger HD prime saline dialyzer time out alarm.
-    }
+//    if ( TRUE == didTimeout( primeSalineDialyzerStartTime, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT ) )
+//    {
+//        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_PRIME_SALINE_DIALYZER_TIME_OUT, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT );  // Trigger HD prime saline dialyzer time out alarm.
+//    }
 
     if ( TRUE == doesAlarmStatusIndicateStop() )
     {