Index: firmware/App/Modes/Prime.c
===================================================================
diff -u -ra1768e13ef00f40c196a9d71094847c19e0ea8a6 -re5e75b8c211cf7f26fa5a8adf9290ea0b5d1afbc
--- firmware/App/Modes/Prime.c	(.../Prime.c)	(revision a1768e13ef00f40c196a9d71094847c19e0ea8a6)
+++ firmware/App/Modes/Prime.c	(.../Prime.c)	(revision e5e75b8c211cf7f26fa5a8adf9290ea0b5d1afbc)
@@ -7,8 +7,8 @@
 *
 * @file    Prime.c
 *
-* @author  (last)      Dara Navaei
-* @date    (last)      12-Jul-2023
+* @author  (last)      Sean Nash
+* @date    (last)      17-Jul-2023
 *
 * @author  (original)  Quang Nguyen
 * @date    (original)  08-Dec-2020
@@ -47,8 +47,8 @@
 #define BLOOD_PUMP_FAST_FLOW_RATE_CIRC_BLOOD_CIRCUIT_ML_MIN 300                                                ///< Blood pump fast flow rate during prime recirculate blood circuit state.
 #define BLOOD_PUMP_FLOW_RATE_SALINE_DIALYZER_ML_MIN         300                                                ///< Blood pump flow rate during prime the saline dialyzer dialysate state.
 #define DIALYSATE_PUMP_PRIME_FLOW_RATE_ML_MIN               300                                                ///< Dialysate pump flow rate during priming fluid path.
-#define DIALYSATE_PUMP_FAST_PRIME_FLOW_RATE_ML_MIN          600                                                ///< Dialysate pump flow rate during priming fluid path.
-#define DPO_PUMP_PRIME_FLOW_RATE_ML_MIN                     225                                                ///< Dialysate outlet pump flow rate needed to match PWM with dialysate inlet pump @ 300 mL/min in open loop mode.
+#define DIALYSATE_PUMP_FAST_PRIME_FLOW_RATE_ML_MIN          600                                                ///< Dialysate pump faster flow rate during priming fluid path.
+#define DPO_PUMP_PRIME_FLOW_RATE_ML_MIN                     240                                                ///< Dialysate outlet pump flow rate needed to match PWM with dialysate inlet pump @ 300 mL/min in open loop mode.
 
 #define DIALYSATE_DIALYZER_TUBE_VOLUME_ML                   115                                                ///< This total tube volume is used to calculate the Dpi & Dpo time out in the dialysate dialyzer state.
 #define DIALYSATE_DIALYZER_BYPASS_TUBE_VOLUME_ML             75                                                ///< This volume is used to calculate the DPi pump time out in the dialyzer bypass state.