Index: firmware/App/Modes/SelfTests.c
===================================================================
diff -u -r2b82ac67c25128e6d1fdcccae85720e166bcecea -r22bb2aeb8ba0702aba894f928dbaf751fa6dcfe6
--- firmware/App/Modes/SelfTests.c	(.../SelfTests.c)	(revision 2b82ac67c25128e6d1fdcccae85720e166bcecea)
+++ firmware/App/Modes/SelfTests.c	(.../SelfTests.c)	(revision 22bb2aeb8ba0702aba894f928dbaf751fa6dcfe6)
@@ -42,7 +42,7 @@
 #define PUMP_RUN_SELF_TEST_TIME_MS                          ( 15 * MS_PER_SECOND )                  ///< Self-test time to run pumps in ms.
 #define PUMP_SELF_TEST_FLOW_RATE_ML_MIN                     100                                     ///< Self-test pump flow rate in mL/min.
 #define BLOOD_PUMP_PRESSURE_SELF_TEST_FLOW                  100
-#define DIAL_IN_PUMP_PRESSURE_SELF_TEST_FLOW                300
+#define DIAL_IN_PUMP_PRESSURE_SELF_TEST_FLOW                400
 #define SYRINGE_PUMP_OCCLUSION_CHECK_DELAY                  ( 1 * MS_PER_SECOND )                   ///< Delay 3 seconds then check for syringe pump prime occlusion.
 
 #define BLOOD_PUMP_RUN_TIME_PRESSURE_SELF_TEST              ( 20 * MS_PER_SECOND )                  ///< Pressure self-test time to run blood pump in ms.
@@ -53,13 +53,13 @@
 #define NORMALIZED_PRESSURE_SELF_TEST_HALF_TIME             ( 5 * MS_PER_SECOND )                   ///< Half the time to wait for pressure to normalize in ms.
 
 #define ARTERIAL_DECAY_PRESSURE_DIFF_TOLERANCE_MMHG         5.0F                                    ///< Difference in arterial pressure readings after the pump stops (in mmHg).
-#define VENOUS_DECAY_PRESSURE_DIFF_TOLERANCE_MMHG           10.0F                                   ///< Difference in venous pressure readings after the pump stops (in mmHg).
+#define VENOUS_DECAY_PRESSURE_DIFF_TOLERANCE_MMHG           5.0F                                    ///< Difference in venous pressure readings after the pump stops (in mmHg).
 #define ARTERIAL_STABILITY_PRESSURE_DIFF_TOLERANCE_MMHG     5.0F                                    ///< Difference in arterial pressure readings while in a stable pressured state (in mmHg).
 #define VENOUS_STABILITY_PRESSURE_DIFF_TOLERANCE_MMHG       5.0F                                    ///< Difference in venous pressure readings while in a stable pressured state (in mmHg).
 
 #define ARTERIAL_PRESSURE_SELF_TEST_LOW_LIMIT_MMHG          -200.0F                                 ///< Arterial pressure low limit after running blood pump.
 #define VENOUS_PRESSURE_SELF_TEST_HIGH_LIMIT_MMHG           200.0F                                   ///< Venous pressure high limit after running blood pump.
-#define VENOUS_PRESSURE_SELF_TEST_FIRST_PASS_LIMIT_MMHG     180.0F                                  ///< Venous pressure high limit after running dpi in first test.
+#define VENOUS_PRESSURE_SELF_TEST_FIRST_PASS_LIMIT_MMHG     200.0F                                  ///< Venous pressure high limit after running dpi in first test.
 
 #define NORMAL_PRESSURE_DIFF_TOLERANCE_MMHG                 10.0F                                   ///< Difference in pressure readings after return to normal state tolerance (in mmHg).
 
@@ -1026,6 +1026,7 @@
     if ( VENOUS_PRESSURE_SELF_TEST_FIRST_PASS_LIMIT_MMHG <= venousPressure )
     {
         signalDialInPumpHardStop();
+        signalActionToResumeFill();
         state = DRY_SELF_TESTS_PRESSURE_SENSORS_ARTERIAL_SETUP_STATE;
     }