Index: firmware/App/Modes/SelfTests.c
===================================================================
diff -u -rdf63092fbdea0bd7c06a5ff18cc12c4eb72e4cbb -rba78a6ce8e6fae706146c36c361b6680b2657642
--- firmware/App/Modes/SelfTests.c	(.../SelfTests.c)	(revision df63092fbdea0bd7c06a5ff18cc12c4eb72e4cbb)
+++ firmware/App/Modes/SelfTests.c	(.../SelfTests.c)	(revision ba78a6ce8e6fae706146c36c361b6680b2657642)
@@ -110,6 +110,7 @@
 static F32 peakVenousPressure;                                      ///< Holds the peak normal venous pressure reading.
 static F32 decayedArterialPressure;                                 ///< Holds the decayed arterial pressure reading after blood pump is stopped.
 static F32 decayedVenousPressure;                                   ///< Holds the decayed venous pressure reading after blood pump is stopped.
+static BOOL dryPressureTestsCompleted;                              ///< Flag indicates dry cartridge pressure leak testing has been completed.
 
 static BOOL wetSelfTestsResult;                                     ///< Result of wet self-tests.
 static WET_SELF_TESTS_STATE_T currentWetSelfTestsState;             ///< Current state of the wet self-tests state machine.
@@ -143,7 +144,7 @@
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestStartState( void );
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestWaitForDoorCloseState( void );
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestUsedCartridgeCheckState( void );
-static DRY_SELF_TESTS_STATE_T handleDrySelfTestCartridgeInstalledCheckState( void );
+static DRY_SELF_TESTS_STATE_T handleDrySelfTestCartridgeLoadedCheckState( void );
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestPressureSensorsNormalSetupState( void );
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestPressureSensorsVenousSetupState( void );
 static DRY_SELF_TESTS_STATE_T handleDrySelfTestPressureSensorsVenousState( void );
@@ -362,7 +363,7 @@
         }
         else
         {
-            SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_NO_CART_SELF_TEST_TIMEOUT, currentNoCartSelfTestsState );
+//            SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_NO_CART_SELF_TEST_TIMEOUT, currentNoCartSelfTestsState );
         }
     }
 }
@@ -395,6 +396,7 @@
     pressureSelfTestNormalizedStartTime = 0;
     previousNormalArterialPressure = 0.0;
     previousNormalVenousPressure = 0.0;
+    dryPressureTestsCompleted = FALSE;
     selfTestStartTime = getMSTimerCount();
     selfTestPreviousPublishDataTime = getMSTimerCount();
     selfTestCartridgeSettleTime = getMSTimerCount();
@@ -443,7 +445,7 @@
             break;
 
         case DRY_SELF_TESTS_CARTRIDGE_LOADED_CHECK_STATE:
-            currentDrySelfTestsState = handleDrySelfTestCartridgeInstalledCheckState();
+            currentDrySelfTestsState = handleDrySelfTestCartridgeLoadedCheckState();
             break;
 
         case DRY_SELF_TESTS_PRESSURE_SENSORS_NORMAL_SETUP_STATE:
@@ -1027,13 +1029,13 @@
 
 /*********************************************************************//**
  * @brief
- * The handleDrySelfTestCartridgeInstalledCheckState function verifies that
- * a cartridge has been installed by looking at the OB reading.
+ * The handleDrySelfTestCartridgeLoadedCheckState function verifies a cartridge
+ * is installed by checking sufficient pressure at OB sensor.
  * @details Inputs: none
  * @details Outputs: none
  * @return the next state of dry self-tests state machine
  *************************************************************************/
-static DRY_SELF_TESTS_STATE_T handleDrySelfTestCartridgeInstalledCheckState( void )
+static DRY_SELF_TESTS_STATE_T handleDrySelfTestCartridgeLoadedCheckState( void )
 {
     DRY_SELF_TESTS_STATE_T state = DRY_SELF_TESTS_USED_CARTRIDGE_CHECK_STATE;
 
@@ -1439,6 +1441,7 @@
     if ( ( STATE_OPEN == getValveAirTrapStatus() ) &&
          ( arterialPressureDiff <= NORMAL_PRESSURE_DIFF_TOLERANCE_MMHG ) && ( venousPressureDiff <= NORMAL_PRESSURE_DIFF_TOLERANCE_MMHG ) )
     {
+        dryPressureTestsCompleted = TRUE;
         state = DRY_SELF_TESTS_SYRINGE_PUMP_PRIME_STATE;
     }
 
@@ -1501,7 +1504,7 @@
                 }
                 else
                 {
-                    SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_SOFTWARE_FAULT, (U32)SW_FAULT_ID_HD_SYRINGE_NOT_PRELOADED )
+                    preloadSyringePlunger();
                 }
             }
         }
@@ -1573,6 +1576,24 @@
 
     doorClosedRequired( FALSE, FALSE );
 
+    // if not enough heparin alarm, pre-load pusher after retract completes
+    if ( TRUE == isAlarmActive( ALARM_ID_HD_SYRINGE_PUMP_NOT_ENOUGH_HEPARIN_ALARM ) )
+    {   // prevent resume until syringe is retracted and pre-loaded
+        setAlarmUserActionEnabled( ALARM_USER_ACTION_RESUME, FALSE );
+        if ( isSyringePumpRunning() != TRUE )
+        {
+            if ( TRUE == isSyringePumpHome() )
+            {
+                preloadSyringePlunger();
+            }
+            else if ( TRUE == isSyringePumpPreLoaded() )
+            {
+                setAlarmUserActionEnabled( ALARM_USER_ACTION_RESUME, TRUE );
+            }
+        }
+    }
+
+    // if resume request, resume dry self-tests
     if ( TRUE == selfTestsResumeRequested )
     {
         // Restart self-test start time
@@ -1588,9 +1609,17 @@
         }
         else
 #endif
-        {
-            doorClosedRequired( FALSE, TRUE );
-            state = DRY_SELF_TESTS_START_STATE;
+        {   // if we've completed pressure testing, resume to syringe pump prime state, otherwise go back to start of dry self-tests
+            if ( TRUE == dryPressureTestsCompleted )
+            {
+                doorClosedRequired( TRUE, TRUE );
+                state = DRY_SELF_TESTS_SYRINGE_PUMP_PRIME_STATE;
+            }
+            else
+            {
+                doorClosedRequired( FALSE, TRUE );
+                state = DRY_SELF_TESTS_START_STATE;
+            }
         }
     }