Index: firmware/App/Services/Interrupts.c
===================================================================
diff -u -r84376e65112b149961efe193128cbbd495fafa6c -r9302e1bd2413cbf99e80ac51aac38502d94801d9
--- firmware/App/Services/Interrupts.c	(.../Interrupts.c)	(revision 84376e65112b149961efe193128cbbd495fafa6c)
+++ firmware/App/Services/Interrupts.c	(.../Interrupts.c)	(revision 9302e1bd2413cbf99e80ac51aac38502d94801d9)
@@ -114,7 +114,7 @@
  * @details
  * Inputs : none
  * Outputs : RTI notification handled.
- * @param notification : Which RTI timer caused this interrupt.
+ * @param notification Which RTI timer caused this interrupt
  * @return none
  *************************************************************************/
 void rtiNotification(uint32 notification)
@@ -149,8 +149,8 @@
  * @details
  * Inputs : none
  * Outputs : CAN message notification handled.
- * @param node : which CAN controller
- * @param messageBox : which message box triggered the message notification
+ * @param node which CAN controller
+ * @param messageBox which message box triggered the message notification
  * @return none
  *************************************************************************/
 void canMessageNotification(canBASE_t *node, uint32 messageBox)
@@ -167,11 +167,11 @@
  * @details
  * Inputs : none
  * Outputs : CAN error notification handled.
- * @param node : which CAN controller
- * @param notification : canLEVEL_PASSIVE    (0x20) : When RX- or TX error counter are between 32 and 63 \n
- *                       canLEVEL_WARNING    (0x40) : When RX- or TX error counter are between 64 and 127 \n
- *                       canLEVEL_BUS_OFF    (0x80) : When RX- or TX error counter are between 128 and 255 \n
- *                       canLEVEL_PARITY_ERR (0x100): When parity error detected on CAN RAM read access
+ * @param node which CAN controller
+ * @param notification canLEVEL_PASSIVE    (0x20) : When RX- or TX error counter are between 32 and 63 \n
+ *                     canLEVEL_WARNING    (0x40) : When RX- or TX error counter are between 64 and 127 \n
+ *                     canLEVEL_BUS_OFF    (0x80) : When RX- or TX error counter are between 128 and 255 \n
+ *                     canLEVEL_PARITY_ERR (0x100): When parity error detected on CAN RAM read access
  * @return none
  *************************************************************************/
 void canErrorNotification(canBASE_t *node, uint32 notification)
@@ -244,8 +244,8 @@
  * @details
  * Inputs : none
  * Outputs : UART error interrupts handled.
- * @param sci : Pointer to the SCI peripheral that detected the error
- * @param flags : error flag(s)
+ * @param sci Pointer to the SCI peripheral that detected the error
+ * @param flags error flag(s)
  * @return none
  *************************************************************************/
 void sciNotification(sciBASE_t *sci, uint32 flags)
@@ -315,8 +315,8 @@
  * @details
  * Inputs : none
  * Outputs : DMA interrupt is handled.
- * @param inttype : type of DMA interrupt
- * @param channel : DMA channel that caused the interrupt
+ * @param inttype type of DMA interrupt
+ * @param channel DMA channel that caused the interrupt
  * @return none
  *************************************************************************/
 void dmaGroupANotification(dmaInterrupt_t inttype, uint32 channel)
@@ -362,8 +362,8 @@
  * @details
  * Inputs : none
  * Outputs : Rotor hall sensor interrupt is handled according to pin associated with given edge.
- * @param hetREG : HET controller associated with the edge.
- * @param edge : Which edge was detected.
+ * @param hetREG HET controller associated with the edge
+ * @param edge Which edge was detected
  * @return none
  *************************************************************************/
 void edgeNotification(hetBASE_t * hetREG, uint32 edge)