Index: firmware/App/Services/SystemCommMessages.c
===================================================================
diff -u -r61153247029a9a246ca1beadc66d772e3e583e4e -r37a8a58b766a496b39241dd7ae46dc10dbda35e4
--- firmware/App/Services/SystemCommMessages.c	(.../SystemCommMessages.c)	(revision 61153247029a9a246ca1beadc66d772e3e583e4e)
+++ firmware/App/Services/SystemCommMessages.c	(.../SystemCommMessages.c)	(revision 37a8a58b766a496b39241dd7ae46dc10dbda35e4)
@@ -73,9 +73,8 @@
  * bit of the sequence # is set if ACK is required per parameter.  A sync byte
  * is inserted at the beginning of the message and an 8-bit CRC is appended to
  * the end of the message. The message is queued for transmission in the given buffer.
- * @details
- * Inputs : none
- * Outputs : given data array populated with serialized message data and queued for transmit.
+ * @details Inputs: none
+ * @details Outputs: given data array populated with serialized message data and queued for transmit.
  * @param msg message to serialize
  * @param buffer outgoing buffer that message should be queued in
  * @param ackReq is an acknowledgement from receiver required?
@@ -155,9 +154,8 @@
  * @brief
  * The sendACKMsg function constructs and queues for transmit an ACK message
  * for a given received message.
- * @details
- * Inputs : none
- * Outputs : ACK message queued for transmit on broadcast CAN channel.
+ * @details Inputs: none
+ * @details Outputs: ACK message queued for transmit on broadcast CAN channel.
  * @param message message to send an ACK for
  * @return TRUE if ACK message queued successfully, FALSE if not
  *************************************************************************/
@@ -186,9 +184,8 @@
  * The sendTestAckResponseMsg function constructs a simple response
  * message for a handled test message and queues it for transmit on the
  * appropriate UART channel.
- * @details
- * Inputs : none
- * Outputs : response message constructed and queued for transmit.
+ * @details Inputs: none
+ * @details Outputs: response message constructed and queued for transmit.
  * @param msgID ID of handled message that we are responding to
  * @param buffer outgoing buffer that message should be queued in
  * @param ack TRUE if test message was handled successfully, FALSE if not
@@ -219,9 +216,8 @@
  * @brief
  * The sendOffButtonMsgToUI function constructs an off button msg to the UI
  * and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Off button msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Off button msg constructed and queued.
  * @param cmd 0=prompt user to confirm, 1=cancel prompt, 2=reject user off request
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -247,9 +243,8 @@
  * The sendChangeUFSettingsResponse function constructs a UF change settings
  * response to the UI and queues the msg for transmit on the appropriate CAN
  * channel.
- * @details
- * Inputs : none
- * Outputs : UF change settings response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: UF change settings response msg constructed and queued.
  * @param accepted T/F - are settings ok?
  * @param reason reason rejected (if not accepted)
  * @param volume_mL UF volume (in mL)
@@ -298,9 +293,8 @@
  * The sendChangeUFSettingsResponse function constructs a UF change settings
  * option response to the UI and queues the msg for transmit on the appropriate CAN
  * channel.
- * @details
- * Inputs : none
- * Outputs : UF change settings option response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: UF change settings option response msg constructed and queued.
  * @param accepted T/F - are settings ok?
  * @param reason reason rejected (if not accepted)
  * @param volume_mL UF volume (in mL)
@@ -340,9 +334,8 @@
  * The sendChangeTreatmentDurationResponse function constructs a treatment
  * duration change response to the UI and queues the msg for transmit on the
  * appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : treatment duration change settings response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: treatment duration change settings response msg constructed and queued.
  * @param accepted T/F - are settings ok?
  * @param reason reason rejected (if not accepted)
  * @param time_min treatment duration (in minutes)
@@ -379,9 +372,8 @@
  * The sendChangeBloodDialysateRateChangeResponse function constructs a change
  * blood and dialysate rate settings response to the UI and queues the msg for
  * transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Blood & dialysate rate change response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Blood & dialysate rate change response msg constructed and queued.
  * @param accepted T/F - are settings ok?
  * @param reason reason code for rejection or unused if accepted
  * @param bloodRate new blood flow rate
@@ -417,9 +409,8 @@
  * @brief
  * The sendTreatmentParamsRangesToUI function constructs a treatment parameter
  * ranges message to the UI and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Treatment parameter ranges msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Treatment parameter ranges msg constructed and queued.
  * @param minTime Minimum treatment duration (in minutes)
  * @param maxTime Maximum treatment duration (in minutes)
  * @param minUFVol Minimum ultrafiltration volume (in mL)
@@ -461,9 +452,8 @@
  * @brief
  * The sendDialysateTempTargetsToDG function constructs a dialysate temperature
  * set points message for DG and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Dialysate temperature set points msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Dialysate temperature set points msg constructed and queued.
  * @param primary temperature set point for primary heater
  * @param trimmer temperature set point for trimmer heater
  * @return TRUE if msg successfully queued for transmit, FALSE if not
@@ -493,9 +483,8 @@
  * @brief
  * The sendDGSwitchReservoirCommand function constructs a DG set active
  * reservoir message for DG and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG set active reservoir msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG set active reservoir msg constructed and queued.
  * @param activeReservoir reservoir ID to set as active
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -522,9 +511,8 @@
  * @brief
  * The sendDGFillCommand function constructs a DG fill command message
  * and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG fill command msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG fill command msg constructed and queued.
  * @param fillToVolumeMl volume (in mL) to fill inactive reservoir to
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -551,9 +539,8 @@
  * @brief
  * The sendDGDrainCommand function constructs a DG drain command message
  * and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG drain command msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG drain command msg constructed and queued.
  * @param drainToVolumeMl volume (in mL) to drain the inactive reservoir to
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -580,9 +567,8 @@
  * @brief
  * The sendDGStartStopCommand function constructs a DG start/stop command
  * message and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG start/stop command msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG start/stop command msg constructed and queued.
  * @param start TRUE indicates start DG, FALSE indicates stop DG
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -610,9 +596,8 @@
  * The sendDGStartStopTrimmerHeaterCommand function constructs a DG start/stop
  * trimmer heater command message and queues the msg for transmit on the
  * appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG start/stop trimmer heater command msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG start/stop trimmer heater command msg constructed and queued.
  * @param start TRUE indicates start heater, FALSE indicates stop heater
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -639,9 +624,8 @@
  * @brief
  * The sendDGSampleWaterCommand function constructs a DG sample water command
  * message and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : DG sample water command msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: DG sample water command msg constructed and queued.
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
 BOOL sendDGSampleWaterCommand( void )
@@ -664,9 +648,8 @@
  * @brief
  * The broadcastAccelData function constructs an accelerometer data msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : accelerometer data broadcast msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: accelerometer data broadcast msg constructed and queued.
  * @param x X axis vector magnitude (in g)
  * @param y Y axis vector magnitude (in g)
  * @param z Z axis vector magnitude (in g)
@@ -711,9 +694,8 @@
  * @brief
  * The broadcastAlarmStatus function constructs an alarm status msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : alarm status msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: alarm status msg constructed and queued.
  * @param almStatus alarm status record
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -756,9 +738,8 @@
  * @brief
  * The broadcastAlarmTriggered function constructs an alarm triggered msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : alarm triggered msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: alarm triggered msg constructed and queued.
  * @param alarm ID of alarm triggered
  * @param almData1 1st data associated with alarm
  * @param almData2 2nd data associated with alarm
@@ -795,9 +776,8 @@
  * @brief
  * The broadcastAlarmCleared function constructs an alarm cleared msg to be
  * broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : alarm cleared msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: alarm cleared msg constructed and queued.
  * @param alarm ID of alarm cleared
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -824,9 +804,8 @@
  * @brief
  * The broadcastBloodFlowData function constructs a blood flow data msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : blood flow data msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: blood flow data msg constructed and queued.
  * @param flowStPt Current set point for blood flow
  * @param measFlow Latest measured blood flow
  * @param measRotorSpd Latest measured blood pump rotoro speed
@@ -868,9 +847,8 @@
  * @brief
  * The broadcastDialInFlowData function constructs a dialysate flow data msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : dialysate flow data msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: dialysate flow data msg constructed and queued.
  * @param flowStPt Current set point for dialysate flow
  * @param measFlow Latest measured dialysate flow
  * @param measRotorSpd Latest measured dialysate pump rotor speed
@@ -912,9 +890,8 @@
  * @brief
  * The broadcastDialInFlowData function constructs a dialysate outlet flow data
  * msg to be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : dialysate out flow data msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: dialysate out flow data msg constructed and queued.
  * @param dialOutFlowData Pointer to the dialysate out flow data record
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -941,9 +918,8 @@
  * @brief
  * The broadcastPresOcclData function constructs a pres/occl data msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : pressure/occlusion data msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: pressure/occlusion data msg constructed and queued.
  * @param artPres Latest measured arterial pressure
  * @param venPres Latest measured venous pressure
  * @param bpOccl Latest measured blood pump occlusion pressure
@@ -981,9 +957,8 @@
  * @brief
  * The broadcastRTCEpoch function constructs an epoch  msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : RTC time and date in epoch
+ * @details Inputs: none
+ * @details Outputs: RTC time and date in epoch
  * @param epoch Current time and date in epoch
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -1010,9 +985,8 @@
  * @brief
  * The broadcastTreatmentTime function constructs a treatment time msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : treatment time data msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: treatment time data msg constructed and queued
  * @param secsTotTreatment Total treatment time prescribed (in seconds)
  * @param secsElapsed Treatment time elapsed (in seconds)
  * @param secsRemaining Treatment time remaining (in seconds)
@@ -1046,9 +1020,8 @@
  * @brief
  * The broadcastTreatmentState function constructs a treatment state msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : treatment state msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: treatment state msg constructed and queued
  * @param subMode Current state (sub-mode) of treatment
  * @param uFState Current state of ultrafiltration
  * @param salineBolusState 1=saline bolus in progress, 0=not, 2=max bolus volume reached
@@ -1082,9 +1055,8 @@
  * @brief
  * The broadcastPowerOffWarning function constructs a power off warning msg to
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : power off warning msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: power off warning msg constructed and queued
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
 BOOL broadcastPowerOffWarning( void )
@@ -1107,9 +1079,8 @@
  * @brief
  * The broadcastHDOperationMode function constructs an HD operation mode
  * broadcast message and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : HD operation mode msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: HD operation mode msg constructed and queued
  * @param mode current HD operation mode
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -1138,9 +1109,8 @@
  * @brief
  * The broadcastHDValves function constructs an HD valves msg to \n
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : HD valves msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: HD valves msg constructed and queued
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
 BOOL broadcastHDValves( HD_VALVE_DATA_T *valveData )
@@ -1166,9 +1136,8 @@
  * @brief
  * The broadcastAirTrapData function constructs an HD air trap data msg to \n
  * be broadcast and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : air trap data msg constructed and queued
+ * @details Inputs: none
+ * @details Outputs: air trap data msg constructed and queued
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
 BOOL broadcastAirTrapData( AIR_TRAP_LEVELS_T lowerLevel, AIR_TRAP_LEVELS_T upperLevel )
@@ -1222,9 +1191,8 @@
 /*********************************************************************//**
  * @brief
  * The handleDGCheckIn function handles a check-in from the DG.
- * @details
- * Inputs : none
- * Outputs : check in the DG with the SystemComm module.
+ * @details Inputs: none
+ * @details Outputs: check in the DG with the SystemComm module.
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1236,9 +1204,8 @@
 /*********************************************************************//**
  * @brief
  * The handleUICheckIn function handles a check-in from the UI.
- * @details
- * Inputs : none
- * Outputs : check in the UI with the SystemComm module.
+ * @details Inputs: none
+ * @details Outputs: check in the UI with the SystemComm module.
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1250,9 +1217,8 @@
 /*********************************************************************//**
  * @brief
  * The handleAlarmTriggered function handles a triggered alarm event message.
- * @details
- * Inputs : none
- * Outputs : alarm triggered.
+ * @details Inputs: none
+ * @details Outputs: alarm triggered.
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1284,9 +1250,8 @@
 /*********************************************************************//**
  * @brief
  * The handleAlarmCleared function handles a cleared alarm event message.
- * @details
- * Inputs : none
- * Outputs : alarm cleared.
+ * @details Inputs: none
+ * @details Outputs: alarm cleared.
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1310,9 +1275,8 @@
  * @brief
  * The handleOffButtonConfirmMsgFromUI function handles a response to an
  * off button message to the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1331,9 +1295,8 @@
  * @brief
  * The handleLoadCellReadingsFromDG function handles a load cell readings
  * broadcast message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1356,9 +1319,8 @@
  * @brief
  * The handleDGTemperatureData function handles a temperature readings
  * broadcast message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1379,9 +1341,8 @@
  * @brief
  * The handleROPumpData function handles an RO pump data broadcast
  * message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1401,9 +1362,8 @@
  * @brief
  * The handleDrainPumpData function handles a drain pump broadcast
  * message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1423,9 +1383,8 @@
  * @brief
  * The handleDGPressuresData function handles a DG pressure sensor readings
  * broadcast message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1445,9 +1404,8 @@
  * @brief
  * The handleDGReservoirData function handles a reservoir data broadcast
  * message from the DG.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1467,9 +1425,8 @@
  * @brief
  * The handleUFPauseResumeRequest function handles a ultrafiltration pause
  * or resume request message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1499,9 +1456,8 @@
  * @brief
  * The handleUIStartTreatmentMsg function handles a treatment start/cancel
  * message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1537,9 +1493,8 @@
  * The sendTreatmentStartResponseMsg function constructs a treatment start
  * request response message to the UI and queues the msg for transmit on
  * the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Treatment start response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Treatment start response msg constructed and queued.
  * @param accepted T/F - request accepted?
  * @param reason reason code if rejected
  * @return TRUE if msg successfully queued for transmit, FALSE if not
@@ -1569,9 +1524,8 @@
  * @brief
  * The handleUIUserEndTreatmentRequest function handles a treatment end
  * request message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1592,9 +1546,8 @@
  * The sendTreatmentEndResponseMsg function constructs a treatment end
  * request response message to the UI and queues the msg for transmit on
  * the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Treatment end response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Treatment end response msg constructed and queued.
  * @param accepted T/F - request accepted?
  * @return TRUE if msg successfully queued for transmit, FALSE if not
  *************************************************************************/
@@ -1621,9 +1574,8 @@
  * @brief
  * The handleTreatmentParametersFromUI function handles a treatment parameters
  * set and validate request message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1647,9 +1599,8 @@
  * @brief
  * The handleUIUserConfirmTreatmentParameters function handles a user confirmation
  * of treatment parameters message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1669,9 +1620,8 @@
  * @brief
  * The sendTreatmentParametersResponseMsg function constructs a treatment parameters
  * response to the UI and queues the msg for transmit on the appropriate CAN channel.
- * @details
- * Inputs : none
- * Outputs : Treatment parameters response msg constructed and queued.
+ * @details Inputs: none
+ * @details Outputs: Treatment parameters response msg constructed and queued.
  * @param accepted T/F - are settings ok?
  * @param rejectReasons reasons each parameter was rejected (if not accepted)
  * @param byteLength number of bytes that array of reject reasons takes
@@ -1702,9 +1652,8 @@
  * @brief
  * The handleChangeUFSettingsRequest function handles a ultrafiltration
  * change settings request message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1728,9 +1677,8 @@
  * @brief
  * The handleChangeUFSettingsConfirmation function handles a ultrafiltration
  * change setting confirmation message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1754,9 +1702,8 @@
  * @brief
  * The handleChangeTreatmentDurationRequest function handles a treatment
  * duration setting change message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1780,9 +1727,8 @@
  * @brief
  * The handleChangeBloodDialysateRateChangeRequest function handles a blood
  * and dialysate rate settings change message from the UI.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1809,9 +1755,8 @@
 /*********************************************************************//**
  * @brief
  * The handleDGOpMode function handles a DG broadcast of it's current mode.
- * @details
- * Inputs : none
- * Outputs : message handled, response constructed and queued for transmit.
+ * @details Inputs: none
+ * @details Outputs: message handled, response constructed and queued for transmit.
  * @param message a pointer to the message to handle.
  * @return none
  *************************************************************************/
@@ -1838,9 +1783,8 @@
 /*********************************************************************//**
  * @brief
  * The handleFWVersionRequest function handles a request for HD f/w version.
- * @details
- * Inputs : none
- * Outputs : message handled, response constructed and queued for transmit.
+ * @details Inputs: none
+ * @details Outputs: message handled, response constructed and queued for transmit.
  * @param message a pointer to the message to handle.
  * @return none
  *************************************************************************/
@@ -1880,8 +1824,8 @@
      * @brief
      * The sendDebugData function sends debug data out to the PC port.
      * @details
-     * Inputs : none
-     * Outputs : PC serial port
+     * @details Inputs: none
+     * @details Outputs: PC serial port
      * @param dbgData Pointer to debug data
      * @param len number of bytes of debug data
      * @return TRUE if debug data was successfully queued for transmit, FALSE if not
@@ -1900,8 +1844,8 @@
      * @brief
      * The sendDebugDataToUI function sends debug string to the UI for logging.
      * @details
-     * Inputs : none
-     * Outputs : Message constructed and queued for transmit
+     * @details Inputs: none
+     * @details Outputs: Message constructed and queued for transmit
      * @param str Pointer to debug string
      * @return none
      *************************************************************************/
@@ -1929,9 +1873,8 @@
  * @brief
  * The isTestingActivated function determines whether a tester has successfully
  * logged in to activate testing functionality.
- * @details
- * Inputs : testerLoggedIn
- * Outputs : none
+ * @details Inputs: testerLoggedIn
+ * @details Outputs: none
  * @return TRUE if a tester has logged in to activate testing, FALSE if not
  *************************************************************************/
 BOOL isTestingActivated( void )
@@ -1944,9 +1887,8 @@
  * The sendTestAckResponseMsg function constructs a simple response
  * message for a handled test message and queues it for transmit on the
  * appropriate UART channel.
- * @details
- * Inputs : none
- * Outputs : response message constructed and queued for transmit.
+ * @details Inputs: none
+ * @details Outputs: response message constructed and queued for transmit.
  * @param msgID ID of handled message that we are responding to
  * @param ack TRUE if test message was handled successfully, FALSE if not
  * @return TRUE if response message successfully queued for transmit, FALSE if not
@@ -1972,9 +1914,8 @@
  * @brief
  * The handleTesterLogInRequest function handles a request to login as a
  * tester.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -1999,9 +1940,8 @@
  * @brief
  * The handleTestOffButtonStateOverrideRequest function handles a request to
  * override the state of the off button.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2033,9 +1973,8 @@
  * @brief
  * The handleTestStopButtonStateOverrideRequest function handles a request to
  * override the stop button state.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2066,9 +2005,8 @@
  * @brief
  * The handleTestAlarmLampPatternOverrideRequest function handles a request to
  * override the alarm lamp pattern.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2099,9 +2037,8 @@
  * @brief
  * The handleTestWatchdogCheckInStateOverrideRequest function handles a
  * request to override the check-in status of a given task.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2132,9 +2069,8 @@
  * @brief
  * The handleTestAlarmStateOverrideRequest function handles a request to
  * override the active status of a given alarm.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2165,9 +2101,8 @@
  * @brief
  * The handleTestAlarmTimeOverrideRequest function handles a request to
  * override the time since activation of a given alarm.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2198,9 +2133,8 @@
  * @brief
  * The handleTestAlarmStatusBroadcastIntervalOverrideRequest function handles a request to
  * override the broadcast interval for alarm status.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2231,9 +2165,8 @@
  * @brief
  * The handleTestBloodFlowSetPointOverrideRequest function handles a request to
  * override the set point for the blood flow rate (mL/min).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2264,9 +2197,8 @@
  * @brief
  * The handleTestBloodFlowMeasuredOverrideRequest function handles a request to
  * override the measured blood flow rate (mL/min).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2297,9 +2229,8 @@
  * @brief
  * The handleTestBloodPumpRotorMeasuredSpeedOverrideRequest function handles a request to
  * override the measured blood pump rotor speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2330,9 +2261,8 @@
  * @brief
  * The handleTestBloodPumpMeasuredSpeedOverrideRequest function handles a request to
  * override the measured blood pump speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2363,9 +2293,8 @@
  * @brief
  * The handleTestBloodPumpMCMeasuredSpeedOverrideRequest function handles a request to
  * override the measured blood pump motor controller speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2396,9 +2325,8 @@
  * @brief
  * The handleTestBloodPumpMCMeasuredCurrentOverrideRequest function handles a request to
  * override the measured blood pump motor controller current (mA).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2429,9 +2357,8 @@
  * @brief
  * The handleTestBloodFlowBroadcastIntervalOverrideRequest function handles a request to
  * override the broadcast interval for blood flow data.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2462,9 +2389,8 @@
  * @brief
  * The handleTestDialInFlowSetPointOverrideRequest function handles a request to
  * override the set point for the dialysate inlet flow rate (mL/min).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2495,9 +2421,8 @@
  * @brief
  * The handleTestDialOutFlowSetPointOverrideRequest function handles a request to
  * override the set point for the dialysate outlet flow rate (mL/min).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2528,9 +2453,8 @@
  * @brief
  * The handleTestDialInFlowMeasuredOverrideRequest function handles a request to
  * override the measured dialysate inlet flow rate (mL/min).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2561,9 +2485,8 @@
  * @brief
  * The handleTestDialInPumpRotorMeasuredSpeedOverrideRequest function handles a request to
  * override the measured dialysate inlet pump rotor speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2594,9 +2517,8 @@
  * @brief
  * The handleTestDialInPumpMeasuredSpeedOverrideRequest function handles a request to
  * override the measured dialysate inlet pump speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2627,9 +2549,8 @@
  * @brief
  * The handleTestDialInPumpMCMeasuredSpeedOverrideRequest function handles a request to
  * override the measured dialysate inlet pump motor controller speed (RPM).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2660,9 +2581,8 @@
  * @brief
  * The handleTestDialInPumpMCMeasuredCurrentOverrideRequest function handles a request to
  * override the measured dialysate inlet pump motor controller current (mA).
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2693,9 +2613,8 @@
  * @brief
  * The handleTestDialInFlowBroadcastIntervalOverrideRequest function handles a request to
  * override the broadcast interval for dialysate inlet flow data.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2726,9 +2645,8 @@
  * @brief
  * The handleTestArterialPressureOverrideRequest function handles a request to
  * override the arterial pressure.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2759,9 +2677,8 @@
  * @brief
  * The handleTestVenousPressureOverrideRequest function handles a request to
  * override the venous pressure.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2792,9 +2709,8 @@
  * @brief
  * The handleTestBloodPumpOcclusionOverrideRequest function handles a request to
  * override the blood pump occlusion sensor.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2825,9 +2741,8 @@
  * @brief
  * The handleTestDialysateInletPumpOcclusionOverrideRequest function handles a request to
  * override the dialysate inlet pump occlusion sensor.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2858,9 +2773,8 @@
  * @brief
  * The handleTestDialysateOutletPumpOcclusionOverrideRequest function handles a request to
  * override the dialysate outlet pump occlusion sensor.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2891,9 +2805,8 @@
  * @brief
  * The handleTestPresOcclBroadcastIntervalOverrideRequest function handles a request to
  * override the broadcast interval for pressure/occlusion data.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2924,9 +2837,8 @@
  * @brief
  * The handleSetRTCTimestamp function handles a request to write time and
  * date to RTC
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2955,9 +2867,8 @@
  * @brief
  * The handleTestDialOutFlowBroadcastIntervalOverrideRequest function handles
  * a request to override the broadcast interval for dialysate outlet pump data.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -2989,9 +2900,8 @@
  * The handleTestDialOutUFReferenceVolumeOverrideRequest function handles a
  * request to override the ultrafiltration reference volume for the dialysate
  * outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3023,9 +2933,8 @@
  * The handleTestDialOutUFMeasuredVolumeOverrideRequest function handles a
  * request to override the ultrafiltration measured volume for the dialysate
  * outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3057,9 +2966,8 @@
  * The handleTestDialOutPumpMCMeasuredSpeedOverrideRequest function handles a
  * request to override the measured motor controller speed for the dialysate
  * outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3091,9 +2999,8 @@
  * The handleTestDialOutPumpMCMeasuredCurrentOverrideRequest function handles a
  * request to override the measured motor controller current for the dialysate
  * outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3124,9 +3031,8 @@
  * @brief
  * The handleTestDialOutPumpMeasuredSpeedOverrideRequest function handles a
  * request to override the measured speed for the dialysate outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3157,9 +3063,8 @@
  * @brief
  * The handleTestDialOutPumpMeasuredRotorSpeedOverrideRequest function handles a
  * request to override the measured rotor speed for the dialysate outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3190,9 +3095,8 @@
  * @brief
  * The handleTestDialOutLoadCellWeightOverrideRequest function handles a
  * request to override the measured load cell weight for the dialysate outlet pump.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3223,9 +3127,8 @@
  * @brief
  * The handleTestHDSafetyShutdownOverrideRequest function handles a
  * request to override the safety shutdown signal.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3256,9 +3159,8 @@
  * @brief
  * The handleTestHDAccelOverrideRequest function handles a request to
  * override the measured accelerometer sensor readings.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3289,9 +3191,8 @@
  * @brief
  * The handleTestHDAccelMaxOverrideRequest function handles a request to
  * override the measured accelerometer sensor maximum readings.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3322,9 +3223,8 @@
  * @brief
  * The handleTestHDAccelBroadcastIntervalOverrideRequest function handles a
  * request to override the broadcast interval for accelerometer data messages.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3355,9 +3255,8 @@
  * @brief
  * The handleSetAccelCalibration function handles a request to set
  * accelerometer calibration factors.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3382,9 +3281,8 @@
  * @brief
  * The handleSetBloodFlowCalibration function handles a request to set
  * blood flow calibration factors.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3409,9 +3307,8 @@
  * @brief
  * The handleSetDialysateFlowCalibration function handles a request to set
  * dialysate flow calibration factors.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3436,9 +3333,8 @@
  * @brief
  * The handleSetDialysateFlowCalibration function handles a request to set
  * dialysate flow calibration factors.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3462,9 +3358,8 @@
 /*************************************************************************
  * @brief
  * The handleHomeHDValve function handles a request to home an HD valve
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3491,9 +3386,8 @@
  * @brief
  * The handleTestHDValvesBroadcastIntervalOverrideRequest function handles
  * a request to override the broadcast interval for HD valves data.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3524,9 +3418,8 @@
  * @brief
  * The handleSetBloodValve function handles a request to set the HD air
  * (blood) trap valve to open or close
- * @details
- * Inputs: none
- * Outputs: message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3552,9 +3445,8 @@
  * @brief
  * The handleSetHDValvePositionOverrideRequest function handles a request to
  * override the position of a valve
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3585,9 +3477,8 @@
  * @brief
  * The handleSetHDValvePWMOverrideRequest function handles a request to
  * override the PWM of a valve
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3618,9 +3509,8 @@
  * @brief
  * The handleSetAirTrapBroadcastIntervalOverrideRequest function handles a
  * request to override the air trap data broadcast interval.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3651,9 +3541,8 @@
  * @brief
  * The handleSetAirTrapLevelSensorOverrideRequest function handles a request to
  * override an air trap level sensor.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/
@@ -3684,9 +3573,8 @@
  * @brief
  * The handleSetAirTrapLevelSensorOverrideRequest function handles a request to
  * override an air trap level sensor.
- * @details
- * Inputs : none
- * Outputs : message handled
+ * @details Inputs: none
+ * @details Outputs: message handled
  * @param message : a pointer to the message to handle
  * @return none
  *************************************************************************/