Index: firmware/App/HDCommon.h
===================================================================
diff -u -r40959111de79e7cc3b1dfed5d244d5038e3c375c -r05585c23f131d1d73df019132d4efb220eb3cfdd
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 40959111de79e7cc3b1dfed5d244d5038e3c375c)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 05585c23f131d1d73df019132d4efb220eb3cfdd)
@@ -62,22 +62,24 @@
 //    #define EMC_TEST_BUILD                  1           // EMC test build - HD/DG run separately but connected, HD pumps toggle on/off w/ stop button
     #define ALARMS_DEBUG                    1           // Triggered alarms sent to debug UART
     #define ALARM_VOLUME_DEFAULT_LOW        1           // Set default alarm volume to lowest
-    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
-    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
+//    #define TEMP_UI_ALARM_SILENCE_FIX       1           // Temporary UI fix for handling alarm silence request msg
+//    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
     #define SKIP_WET_SELF_TESTS             1           // Skip Pre-treatment prime wet self-tests
 //    #define V1_5_SYSTEM                     1           // Build for v1.5 system
 //    #define V2_0_SYSTEM                     1           // Build for v2.0 system
-    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
+//    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
     #define SKIP_CONSUMABLE_TESTS           1           // Skip pre-treatment consumable Self-tests
     #define SKIP_DRY_SELF_TESTS             1           // Skip pre-treatment dry self-tests
-    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
+//    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
 //    #define DISABLE_BATT_COMM               1           // Disable battery communication.
     #define SKIP_AIR_BUBBLE_CHECK           1           // Skip air bubble detector self-test.
     #define DISABLE_OCCLUSION_SELF_TEST     1           // Skip occlusion sensor self-test.
+//    #define SKIP_CARTRIDGE_REMOVAL          1           // Skip cartridge removal check
+    #define SKIP_EMPTY_RES_CHECK            1           // Skip reservoir empty check
     #define DISABLE_FPGA_COUNTER_CHECKS     1           // Disable alarms associated with FPGA read/error counters
     #define DISABLE_VOLTAGE_MONITOR         1           // Disable voltage monitoring/alarms
     #define ALLOW_1_MIN_TREATMENT_DURATION  1           // Allow user to change treatment duration to as low as 1 minute
-//    #define SLOW_SYRINGE_RETRACT            1           // Slow retract speed to reduce chance of stall
+    #define SLOW_SYRINGE_RETRACT            1           // Slow retract speed to reduce chance of stall
     #define DISABLE_SYRINGE_PUMP_ALARMS     1           // Disable some syringe pump alarms that are triggering intermittently
 
     #include <stdio.h>