Index: firmware/App/HDCommon.h
===================================================================
diff -u -r82e9c6f8c12f684f5aca406e93ff31554017eee8 -r1495efc5030108726ac1aa5d083941d90fc12106
--- firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 82e9c6f8c12f684f5aca406e93ff31554017eee8)
+++ firmware/App/HDCommon.h	(.../HDCommon.h)	(revision 1495efc5030108726ac1aa5d083941d90fc12106)
@@ -54,16 +54,16 @@
 //    #define DISABLE_ACCELS                  1           // Disable accelerometer POST and monitoring
 //    #define DISABLE_CRC_ERROR               1           // Do not error on bad CRC for CAN messages
     #define DISABLE_ACK_ERRORS              1           // Do not error on failure of other node(s) to ACK a message
-//    #define USE_FMD_FLOW_SENSOR             1           // Use FMD flow sensor (on HD) instead of FMD on DG
+    #define USE_FMD_FLOW_SENSOR             1           // Use FMD flow sensor (on HD) instead of FMD on DG
 //    #define USE_FMB_FLOW_SENSOR             1           // Use FMB flow sensor instead of flow estimation from pump speed/pressure/wearing
 //    #define RUN_BP_OPEN_LOOP                1           // Run blood pump in open loop mode
-    #define RUN_DPI_OPEN_LOOP               1           // Run dialysate inlet pump in open loop mode
+//    #define RUN_DPI_OPEN_LOOP               1           // Run dialysate inlet pump in open loop mode
     #define WORN_OUT_CARTRIDGE              1           // Running with an old worn out cartridge (max wear)
     #define DISABLE_MOTOR_CURRENT_CHECKS    1           // Do not error on HD pump current checks
     #define DISABLE_PUMP_FLOW_CHECKS        1           // Do not error on HD pump flow checks
     #define DISABLE_PUMP_SPEED_CHECKS       1           // Do not error on HD pump speed checks
 //    #define DISABLE_PUMP_DIRECTION_CHECKS   1           // Do not error on HD pump direction checks
-    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
+//    #define DISABLE_SYRINGE_PUMP            1           // Disable syringe pump functionality
     #define ALWAYS_ALLOW_SYRINGE_PUMP_CMDS  1           // Allow syringe pump commands at any time except when pump is busy
     #define DISABLE_UF_ALARMS               1           // Do not error on HD ultrafiltration checks
     #define DISABLE_DIALYSATE_TEMP_CHECK    1           // Disable dialysate temperature check
@@ -88,12 +88,12 @@
     #define DISABLE_UI_POST_TEST            1           // Disable the UI POST
 
     // Skip Pre-Treatment and get to treatment as soon as possible
-    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
-    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
-    #define SKIP_CONSUMABLE_TESTS           1           // Skip pre-treatment consumable Self-tests
-    #define SKIP_DRY_SELF_TESTS             1           // Skip pre-treatment dry self-tests
-    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
-    #define SKIP_WET_SELF_TESTS             1           // Skip Pre-treatment prime wet self-tests
+//    #define SKIP_UI_INTERACTION             1           // Skip UI interaction.
+//    #define SKIP_SAMPLE_WATER               1           // Skip pre-treatment sample water
+//    #define SKIP_CONSUMABLE_TESTS           1           // Skip pre-treatment consumable Self-tests
+//    #define SKIP_DRY_SELF_TESTS             1           // Skip pre-treatment dry self-tests
+//    #define SKIP_PRIMING                    1           // Skip Pre-treatment Prime
+//    #define SKIP_WET_SELF_TESTS             1           // Skip Pre-treatment prime wet self-tests
 
     #include <stdio.h>
     #include <strings.h>