Index: firmware/.cproject
===================================================================
diff -u -rbcf37e9d2a5aa5fd95239fe5099c9243f99e465d -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/.cproject	(.../.cproject)	(revision bcf37e9d2a5aa5fd95239fe5099c9243f99e465d)
+++ firmware/.cproject	(.../.cproject)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -51,8 +51,7 @@
 								</option>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DEFINE.1286433369" name="Pre-define NAME (--define, -D)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DEFINE" useByScannerDiscovery="false" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__TI_VIM_128CH__"/>
-									<listOptionValue builtIn="false" value="SIMULATE_UI"/>
-									<listOptionValue builtIn="false" value="BOARD_WITH_NO_HARDWARE"/>
+									<listOptionValue builtIn="false" value="WITH_BOOTLOADER"/>
 									<listOptionValue builtIn="false" value="DEBUG_ENABLED"/>
 									<listOptionValue builtIn="false" value="_HD_"/>
 									<listOptionValue builtIn="false" value="__TI_VFPV3D16_SUPPORT__"/>
@@ -63,14 +62,18 @@
 								</option>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DIAG_WRAP.1520602065" name="Wrap diagnostic messages (--diag_wrap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DIAG_WRAP" useByScannerDiscovery="false" value="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DISPLAY_ERROR_NUMBER.715518089" name="Emit diagnostic identifier numbers (--display_error_number, -pden)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.DISPLAY_ERROR_NUMBER" useByScannerDiscovery="false" value="true" valueType="boolean"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.UNDEFINE.446386394" name="Undefine NAME (--undefine, -U)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compilerID.UNDEFINE" useByScannerDiscovery="false" valueType="stringList">
+									<listOptionValue builtIn="false" value="SIMULATE_UI"/>
+									<listOptionValue builtIn="false" value="BOARD_WITH_NO_HARDWARE"/>
+								</option>
 								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__C_SRCS.1812933705" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__C_SRCS"/>
 								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__CPP_SRCS.256619847" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__CPP_SRCS"/>
 								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__ASM_SRCS.1871177351" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__ASM_SRCS"/>
 								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__ASM2_SRCS.836328511" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.compiler.inputType__ASM2_SRCS"/>
 							</tool>
 							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.exe.linkerDebug.150797795" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.exe.linkerDebug">
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.HEAP_SIZE.270592357" name="Heap size for C/C++ dynamic memory allocation (--heap_size, -heap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.HEAP_SIZE" useByScannerDiscovery="false" value="0x100" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.STACK_SIZE.114019599" name="Set C system stack size (--stack_size, -stack)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.STACK_SIZE" useByScannerDiscovery="false" value="0x1000" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.HEAP_SIZE.270592357" name="Heap size for C/C++ dynamic memory allocation (--heap_size, -heap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.HEAP_SIZE" useByScannerDiscovery="false" value="0x2000" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.STACK_SIZE.114019599" name="Set C system stack size (--stack_size, -stack)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.STACK_SIZE" useByScannerDiscovery="false" value="0x6000" valueType="string"/>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.MAP_FILE.1736659389" name="Link information (map) listed into &lt;file&gt; (--map_file, -m)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.MAP_FILE" useByScannerDiscovery="false" value="${ProjName}.map" valueType="string"/>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.OUTPUT_FILE.430964439" name="Specify output file name (--output_file, -o)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.OUTPUT_FILE" useByScannerDiscovery="false" value="${ProjName}.out" valueType="string"/>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.LIBRARY.1046752999" name="Include library file or command file as input (--library, -l)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.12.linkerID.LIBRARY" useByScannerDiscovery="false" valueType="libs">
Index: firmware/App/Modes/Update.c
===================================================================
diff -u -r329acf53eb90ccf47c5b3f68623b87ec38de5fda -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/App/Modes/Update.c	(.../Update.c)	(revision 329acf53eb90ccf47c5b3f68623b87ec38de5fda)
+++ firmware/App/Modes/Update.c	(.../Update.c)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -54,11 +54,11 @@
     unsigned int bytes = 16;
 
     Fapi_issueProgrammingCommand((uint32_t *)dst,
-                                     (uint8_t *)src,
-                                     (uint32_t) bytes,
-                                     0,
-                                     0,
-                                     Fapi_AutoEccGeneration);
+                                 (uint8_t *)src,
+                                 (uint32_t) bytes,
+                                 0,
+                                 0,
+                                 Fapi_AutoEccGeneration);
 
     while(Fapi_checkFsmForReady() == Fapi_Status_FsmBusy);
 
Index: firmware/HD.dil
===================================================================
diff -u -r7a34213f25ce25594311b77a3d003c1e65293a60 -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/HD.dil	(.../HD.dil)	(revision 7a34213f25ce25594311b77a3d003c1e65293a60)
+++ firmware/HD.dil	(.../HD.dil)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -1,7 +1,7 @@
 # RM46L852PGE 04/03/23 16:06:59
-# 
+#
 ARCH=RM46L852PGE
-# 
+#
 DRIVER.TOOLS.VAR.GCC.VALUE=0
 DRIVER.TOOLS.VAR.ARM.VALUE=0
 DRIVER.TOOLS.VAR.IAR.VALUE=0
@@ -105,7 +105,7 @@
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_18_MAPPING.VALUE=18
 DRIVER.SYSTEM.VAR.PMM_LOGIC_PD2_STATEVALUE.VALUE=0x5
 DRIVER.SYSTEM.VAR.CLKT_VCLK3_DOMAIN_DISABLE.VALUE=0
-DRIVER.SYSTEM.VAR.FLASH_ECC_ENABLE.VALUE=1
+DRIVER.SYSTEM.VAR.FLASH_ECC_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.FLASH_BANKS.VALUE=4
 DRIVER.SYSTEM.VAR.CORE_MPU_REGION_9_SUB_4_DISABLE.VALUE=0
 DRIVER.SYSTEM.VAR.CORE_MPU_REGION_2_SUB_2_DISABLE.VALUE=0
@@ -240,7 +240,7 @@
 DRIVER.SYSTEM.VAR.SPI1_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_100_NAME.VALUE=etpwm6Interrupt
 DRIVER.SYSTEM.VAR.CLKT_RTI2_DIVIDER.VALUE=1
-DRIVER.SYSTEM.VAR.RAM_ECC_ENABLE.VALUE=1
+DRIVER.SYSTEM.VAR.RAM_ECC_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.CORE_MPU_REGION_5_SUB_7_DISABLE.VALUE=1
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_99_INT_TYPE.VALUE=IRQ
 DRIVER.SYSTEM.VAR.SAFETY_INIT_CAN4_RAMPARITYCHECK_ENA.VALUE=0
@@ -351,8 +351,8 @@
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_7_MAPPING.VALUE=7
 DRIVER.SYSTEM.VAR.CORE_MPU_REGION_3_PERMISSION.VALUE=PRIV_RW_USER_RW_EXEC
 DRIVER.SYSTEM.VAR.CLKT_RTI2_DOMAIN_ENABLE.VALUE=FALSE
-DRIVER.SYSTEM.VAR.CORE_MPU_BACKGROUND_REGION_ENABLE.VALUE=1
-DRIVER.SYSTEM.VAR.CORE_MPU_ENABLE.VALUE=1
+DRIVER.SYSTEM.VAR.CORE_MPU_BACKGROUND_REGION_ENABLE.VALUE=0
+DRIVER.SYSTEM.VAR.CORE_MPU_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_8_INT_TYPE.VALUE=IRQ
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_2_INT_ENABLE.VALUE=1
 DRIVER.SYSTEM.VAR.VIM_CONFIG.VALUE=TRUE
@@ -707,7 +707,7 @@
 DRIVER.SYSTEM.VAR.VIM_CHANNEL_79_INT_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.VIM_PARITY_AVAILABLE.VALUE=TRUE
 DRIVER.SYSTEM.VAR.SAFETY_INIT_CAN3_RAMPARITYCHECK_ENA.VALUE=1
-DRIVER.SYSTEM.VAR.SAFETY_INIT_RAMECC_SELFCHECK_ENA.VALUE=1
+DRIVER.SYSTEM.VAR.SAFETY_INIT_RAMECC_SELFCHECK_ENA.VALUE=0
 DRIVER.SYSTEM.VAR.ADC2_ENABLE.VALUE=0
 DRIVER.SYSTEM.VAR.CLKT_VCLK2_FREQ.VALUE=104.000
 DRIVER.SYSTEM.VAR.FLASH_DATA_2_WAIT_STATE_FREQ.VALUE=165.0
Index: firmware/source/sys_link.cmd
===================================================================
diff -u -r8bf62b5f327b451c56bae64227a43037139c9e09 -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/source/sys_link.cmd	(.../sys_link.cmd)	(revision 8bf62b5f327b451c56bae64227a43037139c9e09)
+++ firmware/source/sys_link.cmd	(.../sys_link.cmd)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -1,36 +1,36 @@
 /*----------------------------------------------------------------------------*/
 /* sys_link.cmd                                                               */
 /*                                                                            */
-/*
-* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com
-*
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
+/* 
+* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com  
+* 
+* 
+*  Redistribution and use in source and binary forms, with or without 
+*  modification, are permitted provided that the following conditions 
 *  are met:
 *
-*    Redistributions of source code must retain the above copyright
+*    Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the
+*    notice, this list of conditions and the following disclaimer in the 
+*    documentation and/or other materials provided with the   
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
@@ -56,8 +56,8 @@
 
 MEMORY
 {
-	VECTORS (X)  : origin=0x00010020 length=0x00000020  //APP_START_ADDRESS = 0x10020
-    FLASH0  (RX) : origin=0x00010040 length=0x0012FFC0
+    VECTORS (X)  : origin=0x00000000 length=0x00000020
+    FLASH0  (RX) : origin=0x00000020 length=0x0013FFE0
     STACKS  (RW) : origin=0x08000000 length=0x00005800
     RAM     (RW) : origin=0x08005800 length=0x0002a800
 
@@ -67,18 +67,49 @@
 #if 1
 MEMORY
 {
-    VECTORS (X)  : origin=0x00014000 length=0x00000020
-    CRCMEM  (RX) : origin=0x00014020 length=0x000001E0
-    FLASH0  (RX) : origin=0x00014200 length=0x0012BDFF
-    STACKS  (RW) : origin=0x08000000 length=0x00004c00
-    RAM     (RW) : origin=0x08006c00 length=0x00029400
+    VECTORS (X)  : origin=0x00010020
+                   length=0x00000020
+                   vfill = 0xffffffff
 
+    CRCMEM  (RX) : origin=end(VECTORS)
+                   length=0x000001E0
+                   vfill = 0xffffffff
+
+    FLASH0  (RX) : origin=end(CRCMEM)
+                   length=(0x0013FFFF - end(CRCMEM))
+                   vfill = 0xffffffff
+
+    STACKS  (RW) : origin=0x08000000
+                   length=0x00004c00
+
+    RAM     (RW) : origin=0x08004c00
+                   length=0x0002b400
 #endif
+#if 1
+    ECC_VEC  (R) : origin=(0xf0400000 + (start(VECTORS) >> 3))
+                   length=(size(VECTORS) >> 3)
+                   ECC={algorithm=algoL2R4F021, input_range=VECTORS}
+
+    ECC_CRC  (R) : origin=(0xf0400000 + (start(CRCMEM)  >> 3))
+                   length=(size(CRCMEM)  >> 3)
+                   ECC={algorithm=algoL2R4F021, input_range=CRCMEM }
+
+    ECC_FLA0 (R) : origin=(0xf0400000 + (start(FLASH0)  >> 3))
+                   length=(size(FLASH0)  >> 3)
+                   ECC={algorithm=algoL2R4F021, input_range=FLASH0 }
+#endif
 /* USER CODE END */
 }
 
 /* USER CODE BEGIN (3) */
 /* IGNORE the generated Sections code, overridden below */
+ECC
+{
+    algoL2R4F021 : address_mask = 0xfffffff8 /* Address Bits 31:3 */
+                   hamming_mask = R4         /* Use R4/R5 build in Mask */
+                   parity_mask  = 0x0c       /* Set which ECC bits are Even and Odd parity */
+                   mirroring    = F021       /* RM57Lx and TMS570LCx are build in F021 */
+}
 #if 0
 /* USER CODE END */
 
@@ -88,26 +119,26 @@
 SECTIONS
 {
     .intvecs : {} > VECTORS
-    .text    : {} > FLASH0
-    .const   : {} > FLASH0
-    .cinit   : {} > FLASH0
-    .pinit   : {} > FLASH0
+    .text    : {} > FLASH0 
+    .const   : {} > FLASH0 
+    .cinit   : {} > FLASH0 
+    .pinit   : {} > FLASH0 
     .bss     : {} > RAM
     .data    : {} > RAM
     .sysmem  : {} > RAM
+    
 
-
 /* USER CODE BEGIN (4) */
 #endif
 /* Override Sections with CRCs here */
 #if 1
 SECTIONS
 {
     .intvecs : {} > VECTORS, crc_table( _crc_table, algorithm=CRC32_C )
-    .text    : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
-    .const   : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
-    .cinit   : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
-    .pinit   : {} > FLASH0
+    .text  align(32) : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
+    .const align(32) : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
+    .cinit align(32) : {} > FLASH0, crc_table( _crc_table, algorithm=CRC32_C )
+    .pinit align(32) : {} > FLASH0
     .bss     : {} > RAM
     .data    : {} > RAM
     .sysmem  : {} > RAM
Index: firmware/source/sys_mpu.asm
===================================================================
diff -u -reff7b1575f008f81b29ef906f6346fac6012d3ab -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/source/sys_mpu.asm	(.../sys_mpu.asm)	(revision eff7b1575f008f81b29ef906f6346fac6012d3ab)
+++ firmware/source/sys_mpu.asm	(.../sys_mpu.asm)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -181,16 +181,6 @@
         mcr   p15, #0,    r0, c6, c1, #2
 
 
-        ; Enable mpu background region
-        mrc   p15, #0, r0,      c1, c0, #0
-        orr   r0,  r0, #0x20000
-        mcr   p15, #0, r0,      c1, c0, #0
-        ; Enable mpu
-        mrc   p15, #0, r0, c1, c0, #0
-        orr   r0,  r0, #1
-        dsb
-        mcr   p15, #0, r0, c1, c0, #0
-        isb
         bx    lr
 
 r1Base  .word 0x00000000
Index: firmware/source/sys_startup.c
===================================================================
diff -u -r6623684ddacf5beebd15bce8a1dbd06a442fb38e -r1581e96d8d520cfa7ee7a27030a240ed0155c697
--- firmware/source/sys_startup.c	(.../sys_startup.c)	(revision 6623684ddacf5beebd15bce8a1dbd06a442fb38e)
+++ firmware/source/sys_startup.c	(.../sys_startup.c)	(revision 1581e96d8d520cfa7ee7a27030a240ed0155c697)
@@ -120,19 +120,7 @@
      * by its ECC logic for accesses to program flash or data RAM.
      */
     _coreEnableEventBusExport_();
-/* USER CODE BEGIN (9) */
-/* USER CODE END */
 
-    /* Enable response to ECC errors indicated by CPU for accesses to flash */
-    flashWREG->FEDACCTRL1 = 0x000A060AU;
-
-/* USER CODE BEGIN (10) */
-/* USER CODE END */
-
-    /* Enable CPU ECC checking for ATCM (flash accesses) */
-    _coreEnableFlashEcc_();
-	
-
 /* USER CODE BEGIN (11) */
 /* USER CODE END */
 
@@ -253,6 +241,9 @@
     if ((esmREG->SR1[2]) != 0U)
     {
 /* USER CODE BEGIN (24) */
+        const uint32_t testVal = (esmREG->SR1[2]);
+        esmREG->EKR = 0x5;
+#if 1
 /* USER CODE END */
     /*SAFETYMCUSW 5 C MR:NA <APPROVED> "for(;;) can be removed by adding "# if 0" and "# endif" in the user codes above and below" */
     /*SAFETYMCUSW 26 S MR:NA <APPROVED> "for(;;) can be removed by adding "# if 0" and "# endif" in the user codes above and below" */
@@ -261,6 +252,7 @@
         { 
         }/* Wait */                 
 /* USER CODE BEGIN (25) */
+#endif
 /* USER CODE END */
     }
 
@@ -385,26 +377,6 @@
 /* USER CODE BEGIN (37) */
 /* USER CODE END */
 
-
-    /* Initialize CPU RAM.
-     * This function uses the system module's hardware for auto-initialization of memories and their
-     * associated protection schemes. The CPU RAM is initialized by setting bit 0 of the MSIENA register.
-     * Hence the value 0x1 passed to the function.
-     * This function will initialize the entire CPU RAM and the corresponding ECC locations.
-     */
-    memoryInit(0x1U);
-
-/* USER CODE BEGIN (38) */
-/* USER CODE END */
-    
-    /* Enable ECC checking for TCRAM accesses.
-     * This function enables the CPU's ECC logic for accesses to B0TCM and B1TCM.
-     */
-    _coreEnableRamEcc_();
-
-/* USER CODE BEGIN (39) */
-/* USER CODE END */
-
     /* Start PBIST on all dual-port memories */
     /* NOTE : Please Refer DEVICE DATASHEET for the list of Supported Dual port Memories.
        PBIST test performed only on the user selected memories in HALCoGen's GUI SAFETY INIT tab.
@@ -431,18 +403,6 @@
 
 /* USER CODE BEGIN (40) */
 /* USER CODE END */
-
-    /* Test the CPU ECC mechanism for RAM accesses.
-     * The checkBxRAMECC functions cause deliberate single-bit and double-bit errors in TCRAM accesses
-     * by corrupting 1 or 2 bits in the ECC. Reading from the TCRAM location with a 2-bit error
-     * in the ECC causes a data abort exception. The data abort handler is written to look for
-     * deliberately caused exception and to return the code execution to the instruction
-     * following the one that caused the abort.
-     */
-    checkRAMECC();
-
-/* USER CODE BEGIN (41) */
-/* USER CODE END */
 /* USER CODE BEGIN (43) */
 /* USER CODE END */