Index: firmware/App/Modes/TreatmentEnd.c
===================================================================
diff -u -r3833c8a7a90288a6010a625a884048c775c598d3 -rd30cbd6a87d41e58709ae6ad8466f5e193a32397
--- firmware/App/Modes/TreatmentEnd.c	(.../TreatmentEnd.c)	(revision 3833c8a7a90288a6010a625a884048c775c598d3)
+++ firmware/App/Modes/TreatmentEnd.c	(.../TreatmentEnd.c)	(revision d30cbd6a87d41e58709ae6ad8466f5e193a32397)
@@ -8,7 +8,7 @@
 * @file    TreatmentEnd.c
 *
 * @author  (last)      Sean Nash
-* @date    (last)      23-Jun-2023
+* @date    (last)      21-Jul-2023
 *
 * @author  (original)  Sean Nash
 * @date    (original)  05-Feb-2021
@@ -189,12 +189,6 @@
 
     txEndTimerCtr++;
 
-    // Check for user confirmation of end treatment
-    if ( CONFIRMATION_REQUEST_STATUS_ACCEPTED == getConfirmationRequestStatus( GENERIC_CONFIRM_ID_TREATMENT_END ) )
-    {
-        txEndAlarmEndTreatmentRequested = TRUE;
-    }
-
     switch ( treatmentEndState )
     {
         case TREATMENT_END_WAIT_FOR_RINSEBACK_STATE:
@@ -365,8 +359,7 @@
  *************************************************************************/
 void signalTreatmentEndAlarmEndTxUserAction( void )
 {
-    // Send message to UI to get user confirmation to end treatment - action initiated only upon receipt of user confirmation from UI
-    addConfirmationRequest( GENERIC_CONFIRM_ID_TREATMENT_END, GENERIC_CONFIRM_CMD_REQUEST_OPEN, 0 );
+    txEndAlarmEndTreatmentRequested = TRUE;
 }
 
 /*********************************************************************//**
Index: firmware/App/Modes/TreatmentStop.c
===================================================================
diff -u -r3833c8a7a90288a6010a625a884048c775c598d3 -rd30cbd6a87d41e58709ae6ad8466f5e193a32397
--- firmware/App/Modes/TreatmentStop.c	(.../TreatmentStop.c)	(revision 3833c8a7a90288a6010a625a884048c775c598d3)
+++ firmware/App/Modes/TreatmentStop.c	(.../TreatmentStop.c)	(revision d30cbd6a87d41e58709ae6ad8466f5e193a32397)
@@ -7,8 +7,8 @@
 *
 * @file    TreatmentStop.c
 *
-* @author  (last)      Sean Nash
-* @date    (last)      21-Jun-2023
+* @author  (last)      Dara Navaei
+* @date    (last)      19-Jul-2023
 *
 * @author  (original)  Sean
 * @date    (original)  15-Jan-2020
@@ -36,7 +36,8 @@
 // ********** private definitions **********
 
 /// Treatment stop status broadcast interval.
-#define TREATMENT_STOP_DATA_PUBLISH_INTERVAL   ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )
+#define TREATMENT_STOP_DATA_PUBLISH_INTERVAL                  ( MS_PER_SECOND / TASK_GENERAL_INTERVAL )
+#define DIALYSATE_FLOW_RATE_FOR_BLOOD_DETECT_RECOVERY_MLPM    600                  ///< Dialysate flow rate for blood detect recovery in mL/min.
 
 // ********** private data **********
 
@@ -52,9 +53,11 @@
 static TREATMENT_STOP_STATE_T handleTreatmentStopNoRecircState( void );
 static void setupForDialysateRecirculationState( void );
 static void setupForBloodRecirculationState( void );
+static void setupForRecoverBloodDetectState( void );
 static TREATMENT_STOP_STATE_T handleTreatmentStopAlarmsAndSignals( TREATMENT_STOP_STATE_T state );
 static TREATMENT_STOP_STATE_T handleTreatmentStopDialysateRecircState( void );
 static TREATMENT_STOP_STATE_T handleTreatmentStopBloodRecircState( void );
+static TREATMENT_STOP_STATE_T handleTreatmentStopRecoverBloodDetectState( void );
 static void handleTreatmentStopBloodSittingTimer( void );
 
 static void publishTreatmentStopData( void );
@@ -109,7 +112,7 @@
 
     setupForDialysateRecirculationState();
 
-    signalUserRateChange();  // so pressure limits re-stabilize
+    signalInitiatePressureStabilization();
 
     // Reset saline bolus state in case alarm interrupted one
     resetSalineBolus();
@@ -186,6 +189,21 @@
 
 /*********************************************************************//**
  * @brief
+ * The setupForRecoverBloodDetectState function handles the setup for
+ * recovering blood detection state.
+ * @details Inputs: none
+ * @details Outputs: none
+ * @return none
+ *************************************************************************/
+static void setupForRecoverBloodDetectState( void )
+{
+    doorClosedRequired( TRUE, TRUE );
+    cmdStartDGTrimmerHeater();
+    setDialInPumpTargetFlowRate( DIALYSATE_FLOW_RATE_FOR_BLOOD_DETECT_RECOVERY_MLPM, MOTOR_DIR_FORWARD, PUMP_CONTROL_MODE_CLOSED_LOOP );
+}
+
+/*********************************************************************//**
+ * @brief
  * The setupForDialysateRecirculationStopState function sets actuators appropriately
  * for dialysate re-circulation stopped state.
  * @details Inputs: none
@@ -252,6 +270,10 @@
             currentTxStopState = handleTreatmentStopNoRecircState();
             break;
 
+        case TREATMENT_STOP_RECOVER_BLOOD_DETECT_STATE:
+            currentTxStopState = handleTreatmentStopRecoverBloodDetectState();
+            break;
+
         default:
             SET_ALARM_WITH_2_U32_DATA( ALARM_ID_HD_SOFTWARE_FAULT, SW_FAULT_ID_TREATMENT_STOP_INVALID_STATE, currentTxStopState );
             break;
@@ -277,38 +299,39 @@
 static TREATMENT_STOP_STATE_T handleTreatmentStopAlarmsAndSignals( TREATMENT_STOP_STATE_T state )
 {
     TREATMENT_STOP_STATE_T result = state;
-    BOOL bloodRecircBlocked = isBloodRecircBlocked();
-    BOOL dialysateRecircBlocked = isDialysateRecircBlocked();
+    BOOL bloodRecircBlocked       = isBloodRecircBlocked();
+    BOOL dialysateRecircBlocked   = isDialysateRecircBlocked();
 
+    if ( ( TREATMENT_STOP_RECOVER_BLOOD_DETECT_STATE != state ) && ( dialysateRecircBlocked != TRUE ) &&
+         ( TRUE == isAlarmActive( ALARM_ID_HD_BLOOD_LEAK_RECOVERING_PLEASE_WAIT ) ) && ( FALSE == isAlarmActive( ALARM_ID_HD_BLOOD_LEAK_DETECTED ) ) )
+    {
+        setupForRecoverBloodDetectState();
+        result = TREATMENT_STOP_RECOVER_BLOOD_DETECT_STATE;
+    }
     // Both unblocked and not in recirculate both state
-    if ( ( TREATMENT_STOP_RECIRC_STATE != state ) && ( FALSE == dialysateRecircBlocked ) && ( FALSE == bloodRecircBlocked ) )
+    else if ( ( TREATMENT_STOP_RECIRC_STATE != state ) && ( FALSE == dialysateRecircBlocked ) && ( FALSE == bloodRecircBlocked ) )
     {
         setupForBloodRecirculationState();
         setupForDialysateRecirculationState();
         result = TREATMENT_STOP_RECIRC_STATE;
     }
-
     // Both blocked and not in stopped state
-    if ( ( TREATMENT_STOP_NO_RECIRC_STATE != state ) && ( TRUE == dialysateRecircBlocked ) && ( TRUE == bloodRecircBlocked ) )
+    else if ( ( TREATMENT_STOP_NO_RECIRC_STATE != state ) && ( TRUE == dialysateRecircBlocked ) && ( TRUE == bloodRecircBlocked ) )
     {
         setupForBloodRecirculationStopState();
         setupForDialysateRecirculationStopState();
         result = TREATMENT_STOP_NO_RECIRC_STATE;
     }
-
     // Dialysate recirculation blocked and not in blood recirc state
-    if ( ( TREATMENT_STOP_RECIRC_BLOOD_ONLY_STATE != state ) &&
-         ( TRUE == dialysateRecircBlocked ) &&
-         ( FALSE == bloodRecircBlocked ) )
+    else if ( ( TREATMENT_STOP_RECIRC_BLOOD_ONLY_STATE != state ) && ( TRUE == dialysateRecircBlocked ) &&
+              ( FALSE == bloodRecircBlocked ) )
     {
         setupForDialysateRecirculationStopState();
         result = TREATMENT_STOP_RECIRC_BLOOD_ONLY_STATE;
     }
-
     // Blood recirculation blocked and not in dialysate recirc state
-    if ( ( TREATMENT_STOP_RECIRC_DIALYSATE_ONLY_STATE != state ) &&
-         ( TRUE == bloodRecircBlocked ) &&
-         ( FALSE == dialysateRecircBlocked ) )
+    else if ( ( TREATMENT_STOP_RECIRC_DIALYSATE_ONLY_STATE != state ) && ( TRUE == bloodRecircBlocked ) &&
+              ( FALSE == dialysateRecircBlocked ) )
     {
         setupForBloodRecirculationStopState();
         result = TREATMENT_STOP_RECIRC_DIALYSATE_ONLY_STATE;
@@ -393,6 +416,25 @@
 
 /*********************************************************************//**
  * @brief
+ * The handleTreatmentStopRecoverBloodDetectState function handles the recovering
+ * for blood detect state in treatment stop.
+ * @details Inputs: none
+ * @details Outputs: none
+ * @return next treatment stop state
+ *************************************************************************/
+static TREATMENT_STOP_STATE_T handleTreatmentStopRecoverBloodDetectState( void )
+{
+    TREATMENT_STOP_STATE_T result = TREATMENT_STOP_RECOVER_BLOOD_DETECT_STATE;
+
+    // Keep reseting the blood sitting timer
+    handleTreatmentStopBloodSittingTimer();
+    result = handleTreatmentStopAlarmsAndSignals( result );
+
+    return result;
+}
+
+/*********************************************************************//**
+ * @brief
  * The handleTreatmentStopBloodSittingTimer function handles the no re-circ
  * blood timer.  It should only be called when Blood is NOT circulating.
  * Increments and checks for warning and alarm timeouts.