Index: firmware/App/Modes/Prime.c
===================================================================
diff -u -r486f68528804a67c4632bb7fd530fae4cb63cd36 -rd367cda979e9684a25b0d4d5df52bbcf4f3c0acf
--- firmware/App/Modes/Prime.c	(.../Prime.c)	(revision 486f68528804a67c4632bb7fd530fae4cb63cd36)
+++ firmware/App/Modes/Prime.c	(.../Prime.c)	(revision d367cda979e9684a25b0d4d5df52bbcf4f3c0acf)
@@ -57,7 +57,6 @@
 
 #define NO_AIR_DETECTED_COUNT                               ( 40 * MS_PER_SECOND )                             ///< No air detected time period count.
 #define PURGE_AIR_TIME_OUT_COUNT                            ( 240 * MS_PER_SECOND )                            ///< Time period count for purge air time out.
-#define PRIME_SALINE_DIALYZER_TIME_OUT_COUNT                ( 60 * MS_PER_SECOND )                             ///< Time period count for prime saline dialyzer time out.
 #define LOAD_CELL_STEADY_VOLUME_SAMPLING_TIME               (  1 * MS_PER_SECOND )                             ///< Time load cell reading steady state detection sampling time in seconds.
 #define PRIME_DIALYSATE_BYPASS_TIME_LIMIT                   ( 8 * MS_PER_SECOND )                              ///< Time limit for priming dialysate bypass circuit.
 #define STEADY_VOLUME_COUNT_SEC                             ( 10000 / LOAD_CELL_STEADY_VOLUME_SAMPLING_TIME )  ///< Counter must be greater than 10 seconds before steady volume is true.
@@ -864,11 +863,6 @@
     {
         state = HD_PRIME_RESERVOIR_TWO_FILL_COMPLETE_STATE;
     }
-    // TODO: Rework alarm and timeout logic here. PRIME_SALINE_DIALYZER_TIME_OUT_COUNT may not be reached.
-    if ( TRUE == didTimeout( primeSalineDialyzerStartTime, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT ) )
-    {
-        SET_ALARM_WITH_1_U32_DATA( ALARM_ID_HD_PRIME_SALINE_DIALYZER_TIME_OUT, PRIME_SALINE_DIALYZER_TIME_OUT_COUNT );  // Trigger HD prime saline dialyzer time out alarm.
-    }
 
     if ( TRUE == doesAlarmStatusIndicateStop() )
     {