Index: AlarmDefs.h =================================================================== diff -u -r4e345b90a70620f7d225f90ef7a970c11d7c6a52 -r994abd49d5b5096602e0a6e53a0442a87e0e73e3 --- AlarmDefs.h (.../AlarmDefs.h) (revision 4e345b90a70620f7d225f90ef7a970c11d7c6a52) +++ AlarmDefs.h (.../AlarmDefs.h) (revision 994abd49d5b5096602e0a6e53a0442a87e0e73e3) @@ -106,11 +106,16 @@ ALARM_ID_DD_INLET_WATER_PRESSURE_IN_HIGH_RANGE = 75, ///< DD inlet water pressure input high range ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_LOW_RANGE = 76, ///< DD inlet water pressure output low range ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_HIGH_RANGE = 77, ///< DD inlet water pressure output high range - ALARM_ID_RO_CAN_MESSAGE_NOT_ACKED_BY_DD = 78, ///< RO can message not acked by DD fault - ALARM_ID_RO_FPGA_COMM_TIMEOUT = 79, ///< RO FPGA communication timeout - ALARM_ID_RO_COMM_TOO_MANY_BAD_CRCS = 80, ///< RO too many bad crcs - NUM_OF_ALARM_IDS ///< Number of alarms + ALARM_ID_TD_AIR_TRAP_FILL_DURING_TREATMENT = 78, ///< TD air trap fill timeout alarm during treatment + ALARM_ID_TD_AIR_TRAP_ILLEGAL_LEVELS = 79, ///< TD air trap illegal levels + ALARM_ID_TD_PINCH_VALVE_FAULT = 80, ///< TD pinch valve fault + ALARM_ID_TD_VALVE_HOMING_FAILED = 81, ///< TD pinch valve homing fault + ALARM_ID_TD_VALVE_TRANSITION_TIMEOUT = 82, ///< TD pinch valve transition timeout + ALARM_ID_RO_CAN_MESSAGE_NOT_ACKED_BY_DD = 83, ///< RO can message not acked by DD fault + ALARM_ID_RO_FPGA_COMM_TIMEOUT = 84, ///< RO FPGA communication timeout + ALARM_ID_RO_COMM_TOO_MANY_BAD_CRCS = 85, ///< RO too many bad crcs + NUM_OF_ALARM_IDS ///< Number of alarms }; typedef enum Alarm_List ALARM_ID_T; ///< Type for alarm list enumeration @@ -323,6 +328,11 @@ // Priority Rank Fault DDFault Stops ClrIm NoClr NoRes NoRin NoEnd BlkRB BlkET NoBRcr NoDRcr ClrOnly TxLog ID { ALARM_PRIORITY_MEDIUM, 431, FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, TRUE , ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_LOW_RANGE }, { ALARM_PRIORITY_MEDIUM, 430, FALSE, FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, TRUE , ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_HIGH_RANGE }, + { ALARM_PRIORITY_HIGH, 13, FALSE, FALSE, TRUE , TRUE , FALSE, TRUE , TRUE , FALSE, FALSE, FALSE, TRUE , TRUE , FALSE, TRUE , ALARM_ID_TD_AIR_TRAP_FILL_DURING_TREATMENT }, + { ALARM_PRIORITY_HIGH, 10, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_AIR_TRAP_ILLEGAL_LEVELS }, + { ALARM_PRIORITY_HIGH, 10, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_PINCH_VALVE_FAULT }, + { ALARM_PRIORITY_HIGH, 10, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_VALVE_HOMING_FAILED }, + { ALARM_PRIORITY_HIGH, 10, TRUE , FALSE, TRUE , TRUE , TRUE , TRUE , TRUE , TRUE , FALSE, FALSE, TRUE , TRUE , FALSE, FALSE, ALARM_ID_TD_VALVE_TRANSITION_TIMEOUT }, { ALARM_PRIORITY_HIGH, 111, FALSE, FALSE, TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, FALSE, FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_RO_CAN_MESSAGE_NOT_ACKED_BY_DD }, { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, TRUE , FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_RO_FPGA_COMM_TIMEOUT }, { ALARM_PRIORITY_HIGH, 110, FALSE, TRUE , TRUE , TRUE , FALSE, TRUE , FALSE, FALSE, TRUE , FALSE, FALSE, TRUE , FALSE, FALSE, ALARM_ID_RO_COMM_TOO_MANY_BAD_CRCS }, @@ -350,7 +360,12 @@ { 10, ALARM_ID_TD_VOLTAGE_OUT_OF_RANGE }, { 10, ALARM_ID_TD_ARTERIAL_PRESSURE_OUT_OF_RANGE }, { 10, ALARM_ID_TD_VENOUS_PRESSURE_OUT_OF_RANGE }, + { 10, ALARM_ID_TD_AIR_TRAP_ILLEGAL_LEVELS }, + { 10, ALARM_ID_TD_PINCH_VALVE_FAULT }, + { 10, ALARM_ID_TD_VALVE_HOMING_FAILED }, + { 10, ALARM_ID_TD_VALVE_TRANSITION_TIMEOUT }, { 12, ALARM_ID_TD_VENOUS_BUBBLE_DETECTED }, + { 13, ALARM_ID_TD_AIR_TRAP_FILL_DURING_TREATMENT }, { 100, ALARM_ID_TD_AC_POWER_LOST_IN_TREATMENT }, { 110, ALARM_ID_DD_CRITICAL_DATA_ERROR }, { 110, ALARM_ID_DD_WATCHDOG_EXPIRED }, @@ -515,9 +530,14 @@ // Num Alarm ID Device Display Title Instructions Alarm List Title Description Trigger Condition { 76 , ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_LOW_RANGE , "DD | Incoming Water Pressure Output Low | Water inlet pressure after regulator is low.\n- Treatment is currently paused.\n- Check the incoming water supply.\n- When the pressure is within target range\nResume/OK button will be available.\n- Press Resume/OK to continue treatment. | DD: Inlet Water Pres Output Low | DD Inlet water pressure output too low | Inlet water pressure output < 11 PSI. | "}, { 77 , ALARM_ID_DD_INLET_WATER_PRESSURE_OUT_HIGH_RANGE , "DD | Incoming Water Pressure Output High | Water inlet pressure after regulator is high.\n- Treatment is currently paused.\n- Check the incoming water supply.\n- When the pressure is within target range\nResume/OK button will be available.\n- Press Resume/OK to continue treatment. | DD: Inlet Water Pres Output High | DD inlet water pressure output is too high | If the inlet water pressure output is > 20 psig. | "}, - { 78 , ALARM_ID_RO_CAN_MESSAGE_NOT_ACKED_BY_DD , "RO | Communication Error | A communication problem has been detected.\n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Loss of DD Comm (DD ACK) | DD to RO comm error. | DD message to RO that requires acknowledge was not acknowledged within a certain time. | "}, - { 79 , ALARM_ID_RO_FPGA_COMM_TIMEOUT , "RO | Service Required: Dialysate Device | A problem was detected with the dialysate device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Fault: FPGA Comm | RO FPGA communication down for too long | If retries for commands exceeds limit or FPGA reports comm error. | "}, - { 80 , ALARM_ID_RO_COMM_TOO_MANY_BAD_CRCS , "RO | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Fault: CAN CRC Comm | RO Too many bad CRCs detected on received system messages | If too many bad message CRCs are received within a set period of time | "}, + { 78 , ALARM_ID_TD_AIR_TRAP_FILL_DURING_TREATMENT , "TD | Blood Pump Stopped: Venous Air Detector | A problem was detected with the venous air detector.\n- Confirm arterial access placement and ensure\nconnections are secure.\n- Treatment must be terminated without rinseback. | Blood Stop: Air Trap Fill | Air trap fill timeout during treatment | If the air trap fill timeout during treatment. | "}, + { 79 , ALARM_ID_TD_AIR_TRAP_ILLEGAL_LEVELS , "TD | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | TD Fault: Air Trap Sensor | Air trap level sensors reporting illegal combination of air/fluid | If the air trap level readings are not valid for more than 2 seconds. | "}, + { 80 , ALARM_ID_TD_PINCH_VALVE_FAULT , "TD | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | TD Fault: Pinch Valve | Pinch valve reporting a fault | If the valve detects a driver, direction or encoder fault condition. | "}," + { 81 , ALARM_ID_TD_VALVE_HOMING_FAILED , "TD | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | TD Fault: Valve Home | TD valve homing failed | If the number of failed homing > = 3 counts. | "}, + { 82 , ALARM_ID_TD_VALVE_TRANSITION_TIMEOUT , "TD | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | TD Fault: Valve Transition Err | TD valve transition time out | if the valve's transition time has timed out (3000msec) | "}, + { 83 , ALARM_ID_RO_CAN_MESSAGE_NOT_ACKED_BY_DD , "RO | Communication Error | A communication problem has been detected.\n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Loss of DD Comm (DD ACK) | DD to RO comm error. | DD message to RO that requires acknowledge was not acknowledged within a certain time. | "}, + { 84 , ALARM_ID_RO_FPGA_COMM_TIMEOUT , "RO | Service Required: Dialysate Device | A problem was detected with the dialysate device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Fault: FPGA Comm | RO FPGA communication down for too long | If retries for commands exceeds limit or FPGA reports comm error. | "}, + { 85 , ALARM_ID_RO_COMM_TOO_MANY_BAD_CRCS , "RO | Service Required: Hemodialysis Device | A problem was detected with the hemodialysis device. \n- Treatment must be terminated.\n- Locate the ID code found in the bottom left corner\nof the alarm screen.\n- Call service to report the issue and schedule a repair. | RO Fault: CAN CRC Comm | RO Too many bad CRCs detected on received system messages | If too many bad message CRCs are received within a set period of time | "}, }; #endif // manual alarms