Index: configurations/Instructions/Instructions.conf
===================================================================
diff -u -r65465f788ce5d6cc7cdfdaf270650a22ed8c39f6 -rbcafc1d20046aaf42e7f697f9c33376e0b6b6126
--- configurations/Instructions/Instructions.conf	(.../Instructions.conf)	(revision 65465f788ce5d6cc7cdfdaf270650a22ed8c39f6)
+++ configurations/Instructions/Instructions.conf	(.../Instructions.conf)	(revision bcafc1d20046aaf42e7f697f9c33376e0b6b6126)
@@ -8,127 +8,139 @@
 # In case extra string or precision is not being used leave it empty eg. {77:1::}
 # the format shall always have three ':' and message id and parameter number shall not be ignored.
 # otherwise will NOT be identified as a value reserved block and will be used as part of the string.
+# Entry format:
+# [<Prefix '@' for advanced mode><Step Tite>^<User mode or sub step>]
+# "Title" = <Title string>
+# <Instruction step> = <image.png>
+# - OR -
+# [<Prefix '$' for HDF mode><Step Tite>]
+# "Title" = <Title string>
+# <Instruction step> = <image.png>
+# Rich Text is supported:
+# ex:
+# <b></b> 		- bold
+# <i></i>		- italic
+# <u> 			- underlined text
+# <$HEX>text</$> 	- color text // Ex. <$2268FF>TEST</$> - Do not add '0x' to HEX value
 # ######################################################################################################
 
-[Sample^Water Sample]
-Place cup in the water sampling pocket. Press and hold the "Water Sample" button. = 9_water sampling.png
+[Concentrates]
+Title = Connect Acid and Bicarbonate Concentrates
+Remove acid connector and connect to acid concentrate. = Concentrates_1.png
+Connect dry bicarbonate. = Concentrates_2.png
 
-[Sample^Water Sample Result]
-Test the water sample per your clinic's instructions and enter the result. = 42_water test pass fail.png
+[Installation^Blood Tubing Set]
+Title = Install Blood Tubing Set
+Open the blood pump door. = Installation_BloodTube_1.png
+Insert blood tubing set and ensure it is secure. = Installation_BloodTube_2.png
+Push the blood tube into the blood pump. = Installation_BloodTube_3.png
+Close the blood pump door. = Installation_BloodTube_4.png
 
-[Sample^Water Sample Result Failed]
-Water sample result failed. = 40_water test fail.png
+[Installation^Bloodlines]
+Title = Install Bloodlines
+Insert saline line into the first slot. = Installation_Bloodlines_1.png
+Insert <$B53333>arterial</$> line into the second slot. = Installation_Bloodlines_2.png
+Ensure the <$2268FF>venous</$> line is placed in the bubble detector. = Installation_Bloodlines_3.png
+Insert the <$2268FF>venous</$> line into the third slot. = Installation_Bloodlines_4.png
+Connect the <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines using the recirculation connector. = Installation_Bloodlines_5.png
 
-[Consumables^Consumables Installation]
-Remove the concentrate and dialysate caps. = 47_remove DG caps.png
-Connect the acid concentrate to the acid port. = 10_install acid line.png
-Connect the bicarbonate concentrate to the bicarbonate port. = 11_install bicarb line.png
+[Installation^Pressure Lines and Dialyzer]
+Title = Install Pressure Lines and Dialyzer
+Connect the <$B53333>arterial</$> pressure line to the <$B53333>arterial</$> pressure transducer port. = Installation_CPLD_1.png
+Connect the <$2268FF>venous</$> pressure line to the <$2268FF>venous</$> pressure transducer port. = Installation_CPLD_2.png
+Insert dialyzer into the holder and connect the dialysate lines. = Installation_CPLD_3.png
+Connect the bloodlines to the dialyzer. = Installation_CPLD_4.png
+Clamp the <$2268FF>venous</$> chamber line. = Installation_CPLD_5.png
+Clamp the heparin line. = Installation_CPLD_6.png
 
-[Disposables^Cartridge Installation]
-Open the front panel door. = 1_HD door open-01.png
-Unlock the pump track by moving the lever to its full upward position. = 69_pump track open without cart.png
-Install the cartridge using the alignment pins. = 3_insert casette-01.png
-Insert tubing into blood and dialysate pumps. = 4_loop casette tubes-01.png
-Lock the pump track by moving the lever to its downward position. = 6_Pump track lock-01.png
+[Installation^Saline]
+Title = Connect Saline Bag
+Hang saline bag on the hook. = Saline_1.png
+Clamp saline line. = Saline_2.png
+Use the saline line to spike saline bag. = Saline_3.png
 
-[Disposables^Cartridge Connection]
-Connect arterial and venous bloodlines using the recirculation connector. = 51_shunt patient lines.png
-Place the arterial pressure line behind the arterial and venous bloodlines\nand connect to the arterial pressure transducer port. = 70_PBa connection Rev02.png
-Connect the venous pressure line to the venous pressure transducer port. = 23_PBo connection.png
-Connect the bloodlines to the dialyzer. = 20_connect blood lines to dialyzer.png
-Connect the dialysate lines to the dialyzer. = 21_connect dialysate lines to dialyzer.png
-Insert dialyzer into the dialyzer holder. = 19_insert dialyzer.png
-Clamp the heparin line. = 50_clamp_heparin.png
-Clamp venous chamber line. = 49_clamp venous chamber line.png
-Connect the dialysate lines to the dialysate fluid ports. = 16_connect dialysate lines to DG.png
+[Installation^Substitution]
+Title = Connect Substitution Line
+Connect substitution line to the appropriate Pre or Post dilution port. = Saline_1.png
 
-[Disposables^Heparin Syringe]
-Fill a syringe with {77:2:mL:1} heparin and connect to the heparin tubing line. = 25_fill syringe with heparin.png
-Insert heparin filled syringe into the syringe pump. Unclamp heparin line. = 26_load syringe.png
+[@Installation]
+Title = Install Concentrates and Blood Tubing Set
+Install acid and bicarbonate concentrates. = Install_Advanced_1.png
+Install blood tubing set, dialyzer, and saline bag. = Install_Advanced_2.png
 
-[Disposables^Saline Bag]
-Clamp saline line and y-connector. = 53_pinch saline line and y connector.png
-Hang the saline bag on the hook on the left side of the system.\nUse the saline line to spike a saline bag. = 29_spike and hang saline bag.png
-Close the front panel door. Ensure lines are not kinked. = 66_hd door close with cart.png
-Unclamp the saline line. Leave the y-connector clamped. = 54_unpinch saline and clamped y connector.png
+[Connect]
+Title = Connect Bloodlines to the Patient
+Clamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines (2 clamps). = Connect_1.png
+Remove recirculation connector from the bloodlines. = Connect_2.png
+Connect bloodlines to patient access lines. = Connect_3.png
+Unclamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines (2 clamps). = Connect_4.png
 
-[Connection^Patient Connection]
-Open the front panel door. = 67_hd door open with cart.png
-Remove dialyzer from dialyzer holder and invert dialyzer. Reinstall dialyzer into dialyzer holder. = 52_invert_dialyzer.png
-Close the front panel door. Ensure lines are not kinked. = 66_hd door close with cart.png
-Draw a dialysate sample from the luer lock connection port.\nTest the dialysate sample per your facility's policy =  17_dialysate sample.png
-Wash your hands and establish vascular access per your facility's policy. = 43_wash hands.png
-Clamp arterial and venous bloodlines. = 56_clamp shunted patient lines.png
-Remove arterial and venous line recirculation connector. = 34_remove recirc connector.png
-Connect arterial and venous bloodlines to your patient access lines. = 31_connect arterial and venous lines to patient.png
+[@Connect]
+Title = Connect Bloodlines to the Patient
+Connect bloodlines to patient access lines. = Connect_Advanced_1.png
 
-[Connection^Start Treatment]
-Unclamp arterial and venous bloodlines. = 32_unpinch arterial and venous for blood prime.png
+[Disconnection]
+Title = Remove Concentrates and Blood Tubing Set
+Remove blood tubing set and dialyzer. = Install_Advanced_2.png
+Remove acid and bicarbonate concentrates. = Install_Advanced_1.png
 
-[^Rinseback Setup]
-Clamp arterial bloodlines and disconnect. = 33_disconnect arterial lines.png
-Connect arterial bloodline to the saline y-connector. = 35_connect saline y.png
-Unclamp arterial bloodline and saline y-connector. = 38_unclamp saline lines.png
+[Water Sample]
+Title = Test Primary Carbon Filter
+Test the primary carbon filter and select the result below. = Water_Sample_1.png
 
-[^Rinseback Complete]
-If rinseback is complete, clamp arterial bloodline and saline y-connector.\nFollow your facility's policy prior to disconnecting patient. = 64_rinseback clamp arterial and saline lines.png
+[Blood Return Setup]
+Title = Blood Return Connection
+Clamp <$B53333>arterial</$> bloodlines and disconnect. = Return_Blood_1.png
+Connect <$B53333>arterial</$> bloodline to the saline y-connector. = Return_Blood_2.png
+Unclamp <$B53333>arterial</$> bloodline and saline y-connector. = Return_Blood_3.png
 
-[^Rinseback Reconnect]
-Clamp arterial bloodline and saline y-connector. Disconnect the arterial bloodline. = 48_disconnect saline y.png
-Connect arterial bloodline to your patient access line. = 71_rinseback arterial re-connect.png
-Unclamp arterial and venous bloodlines. = 32_unpinch arterial and venous for blood prime.png
+[$Blood Return Setup]
+Title = Blood Return Connection
+Clamp <$B53333>arterial</$> bloodlines and disconnect.
+Connect <$B53333>arterial</$> bloodline to the substitution line using a sterile connector.
+Unclamp <$B53333>arterial</$> bloodline and substitution line.
 
-[Disconnection^Patient Disconnection]
-Clamp venous bloodlines and disconnect. = 63_disconnect venous lines.png
-Connect the venous bloodline to the luer lock connection port on the venous line. = 58_end treatment connect venous to sampling port.png
+[Recirculate Set Up]
+Title = Connect Recirculation Lines
+Clamp <$2268FF>venous</$> bloodline and disconnect.
+Clamp <$B53333>arterial</$> bloodlines and disconnect from saline y-connector.
+Connect <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines using the recirculation connector.
+Unclamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
 
-[Disposables^Disposables Removal]
-Open the front panel door. = 67_hd door open with cart.png
-Disconnect the arterial and venous pressure lines. = 24_PBo and PBA removal.png
-If heparin was used during treatment, remove syringe. = 28_remove syringe.png
-Clamp dialysate lines and disconnect from the dialysate ports. = 18_disconect dialysate lines from DG.png
-Replace dialysate cap. = 12_replace dialysate line cap.png
-Disconnect acid and bicarbonate concentrates lines from the concentrate ports.= 13_remove acid and bicarb connect.png
-Replace concentrate cap. = 59_install concentrate caps.png
-Unlock the pump track by moving the lever to its upward position. = 8_pump track unlock.png
-Remove cartridge, dialyzer, and saline bag from the HD device. = 5_remove casette-01.png
-Lock the pump track by moving the lever to its downward position and close front panel door. = 2_HD door closed-01.png
+[$Recirculate Set Up]
+Title = Connect Recirculation Lines
+Clamp <$2268FF>venous</$> bloodline and disconnect.
+Clamp <$B53333>arterial</$> and disconnect from the substitution line.
+Connect substitution line to the appropriate dilution port.
+Connect <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines using the recirculation connector.
+Unclamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
 
+[Reconnect To Patient]
+Title = Connect Patient Bloodlines
+Clamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
+Remove <$B53333>arterial</$> and <$2268FF>venous</$> line recirculation connector.
+Connect <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines to patient access lines.
+Unclamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
 
-[^Recirculate Disconnect]
-Clamp arterial bloodline and saline y-connector. Disconnect the arterial bloodline. = 48_disconnect saline y.png
-Clamp venous bloodlines and disconnect. = 63_disconnect venous lines.png
-Connect arterial and venous bloodlines using the recirculation connector. = 60_recirc shunt patient lines.png
-Unclamp arterial and venous bloodlines. = 62_recirc unclamp recirc lines.png
+[$Reconnect To Patient]
+Title = Connect Patient Bloodlines
+Clamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
+Remove <$B53333>arterial</$> and <$2268FF>venous</$> line recirculation connector.
+Connect <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines to patient access lines.
+Unclamp <$B53333>arterial</$> and <$2268FF>venous</$> bloodlines.
 
-[^Recirculate]
-Treatment is paused. Blood and dialysate pumps are recirculating = 61_recirc recirculating pumps.png
 
-[^Recirculate Stopped]
-Recirculation is stopped. Blood pump is stopped. = 65_recirc stop TEMP.png
+[Recirculate Set Up]
+Title = Connect Recirculation Lines
+Clamp venous bloodlines and disconnect.
+Clamp arterial bloodlines and disconnect from saline y-connector.
+Connect arterial and venous bloodlines using the recirculation connector.
+Unclamp arterial and venous bloodlines.
 
-[^Recirculate Reconnect]
-Clamp arterial and venous bloodlines. = 56_clamp shunted patient lines.png
-Remove arterial and venous line recirculation connector. = 34_remove recirc connector.png
-Connect arterial and venous bloodlines to your patient access lines. = 31_connect arterial and venous lines to patient.png
-Unclamp arterial and venous bloodlines. = 32_unpinch arterial and venous for blood prime.png
+[Reconnect To Patient]
+Title = Connect Bloodlines To Patient
+Clamp arterial and venous bloodlines.
+Remove arterial and veous line recirculation connector.
+Connect arterial and venous bloodlines to patient access lines.
+Unclamp arterial and venous bloodlines.
 
-[Water Flush^Water Flush]
-Ensure dialysate and concentrate caps are fully closed. =  46_install caps.png
-
-[Heat Disinfect^Heat Disinfect]
-Ensure dialysate and concentrate caps are fully closed. =  46_install caps.png
-
-[Heat Disinfect with Active Cool^Heat Disinfect with Active Cool]
-Ensure dialysate and concentrate caps are fully closed. =  46_install caps.png
-
-[Chemical Disinfect^Chemical Disinfect]
-Remove the concentrate cap and connect the chemical disinfectant = 14_connect PAA.png
-
-[Chemical Flush^Chemical Flush]
-Disconnect the chemical disinfectant and replace concentrate cap. = 15_disconnect PAA.png
-Ensure dialysate and concentrate caps are fully closed. =  46_install caps.png
-
-[RO Permeate Sample^RO Permeate Sample]
-Ensure dialysate and concentrate caps are fully closed. =  46_install caps.png
-