Index: suite_leahi/tst_main_tx_hdf/test.py
===================================================================
diff -u
--- suite_leahi/tst_main_tx_hdf/test.py	(revision 0)
+++ suite_leahi/tst_main_tx_hdf/test.py	(revision 64d49b959822aabfe5ca6b2b585dd2f1c947ee18)
@@ -0,0 +1,115 @@
+# Subject/Title: LDT -3429 HDF - SW - 02 - Main-Tx HDF Tab - Graph - Q&R - 15: SIT - Software Integration Tests - Squish Qt
+# Functionalities: Testing all functionalities of MAin TX HDF tab in the main treatment screen
+#
+# Steps: 
+#Main TX HDF Tab
+#1 Navigate to Main Treatment by changing OP mode to main treatement
+#    -  Change opmode to DIALYSiS
+#2.Navigate to HDF Tab
+#    - Send pressures data
+#    - Confirm Pressures component
+#    - Wait 2 minutes ( The graph component plot graphs every 1 min)
+#           - once a plot is present scrub the graph area and confirm the top area shows the current vertical line data
+#3.HDF Component
+#    - verify pressure data in the popup
+#    - verify edit popup and when user changes items and saves the main componenet reflects the changes
+
+
+import names
+from leahi_dialin.ui import utils
+from configuration import utility,config,navigation
+from configuration import config
+from leahi_dialin.ui.td_messaging import TD_Messaging
+from leahi_dialin.common.ui_defs  import TXStates
+from leahi_dialin.common.td_defs import TDOpModes,TDTreatmentStates
+from leahi_dialin.utils     import conversions
+from leahi_dialin.common.msg_defs import MsgIds, MsgFieldPositions
+
+td =TD_Messaging()
+
+ART_LOW_VAL_MINUS_390   = -390
+ART_HIGH_VAL_220        = 220
+VENOUS_LOW_VAL_MINUS_90 = -90
+VENOUS_HIGH_VAL_410     = 410
+TMP_LOW_VAL_MINUS_640   = -640
+TMP_HIGH_VAL_210        = 210
+
+def main():
+    utils.tstStart(__file__)
+    startApplication(config.AUT_NAME)
+    
+    test.startSection("Navigate to the HDF Page")
+    td.td_operation_mode(TDOpModes.MODE_TREA.value)
+    utils.waitForGUI(2)
+    td.td_tx_state( TDTreatmentStates.TREATMENT_BLOOD_PRIME_STATE.value,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0)
+    
+    td.td_tx_state( TDTreatmentStates.TREATMENT_DIALYSIS_STATE.value,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0 ,
+                    0)
+    waitForObject(names.o_listView_Item,1000)
+    hdf = utility.setObjectText(text="HDF", obj=names.o_listView_Item)
+    mouseClick(waitForObject(hdf))
+    td.td_pressure(H2_arterial_pressure     = 160,
+                   H14_venous_pressure      = 440 , 
+                   limit_state              = 0, 
+                   H2_arterial_min          = ART_LOW_VAL_MINUS_390, 
+                   H2_arterial_max          = ART_HIGH_VAL_220   , 
+                   H14_venous_min           = VENOUS_LOW_VAL_MINUS_90   , 
+                   H14_venous_max           = VENOUS_HIGH_VAL_410  , 
+                   H2_arterial_long         = 0 , 
+                   H14_venous_long          = 0 , 
+                   tmp_pressure             = 200 , 
+                   tmp_long                 = 0.0 , 
+                   tmp_min                  = TMP_LOW_VAL_MINUS_640 , 
+                   tmp_max                  = TMP_HIGH_VAL_210,
+                   barometric               = 0.0) 
+    
+    pressure_edit = waitForObject(names.o_treatmentHDF_treatmentPressures_TreatmentPressures)
+    pressure_edit = utility.findObjectById(pressure_edit, "_editButton")
+    mouseClick(waitForObject(pressure_edit))
+    mouseClick(waitForObject(names.o_confirmButton_TouchRect))
+    mouseClick(waitForObject(names.o_vitals_close_btn))
+    payload = conversions.integer_to_bytearray(1)
+    payload += conversions.integer_to_bytearray(0)
+    td.cmd_send_general_response(message_id =MsgIds.MSG_ID_TD_PRESSURE_LIMITS_CHANGE_RESPONSE.value,
+                                 reason=0,
+                                 accepted=1,
+                                 is_pure_data   = False,
+                                 has_parameters = True,
+                                 parameters_payload= payload)
+    snooze(120)
+    parent = waitForObject(names.o_treatmentHDF_currentDataRow_Row)
+    time = utility.findObjectById(parent,"_timeText")
+    test.log(str(time.text))
+    arterial_pressure = utility.findObjectById(parent,"_line1Text")
+    test.compare(str(arterial_pressure.text),str(160),"Arterial_pressure value in the graph should be"+str(arterial_pressure.text))
+    venous_pressure = utility.findObjectById(parent ,"_line2Text")
+    test.compare(str(venous_pressure.text),str(440),"Venous_pressure value in the graph should be"+str(venous_pressure.text))
+    tmp_pressure =utility.findObjectById(parent,"_line3Text")
+    test.compare(str(tmp_pressure.text),str(200),"Temperature_pressure value in the graph should be"+str(tmp_pressure.text))
+    hdf_edit_button = waitForObject(names.o_treatmentHDF_treatmentHdfComponent_TreatmentHDFComponent)
+    edit_hdf = utility.findObjectById(hdf_edit_button,"_editButton")
+    mouseClick(edit_hdf)
+    utility.set_value_based_on_target(names.o_valueAdjuster_ValueAdjuster, 1.1)
+    mouseClick(names.o_confirmButton_ConfirmButton)
+    prescribed_fluid_volume = waitForObject(names.o_treatmentHDF_prescribedFluidVolume_LabelUnitValueAdjuster,1000)
+    prescribed_fluid_volume_value = round(prescribed_fluid_volume.value,1)
+    test.compare(prescribed_fluid_volume_value, float(1.1), "Prescribed Fluid volume should be"+str(prescribed_fluid_volume_value))
+    utils.tstDone()
+