Index: shared/scripts/configuration/config.py
===================================================================
diff -u -r0cc92d3b75bfb96dc4ecafd760a9ce15e455033b -r0af75233cc3f591575f857eaf0e62f9ab3b10f2c
--- shared/scripts/configuration/config.py	(.../config.py)	(revision 0cc92d3b75bfb96dc4ecafd760a9ce15e455033b)
+++ shared/scripts/configuration/config.py	(.../config.py)	(revision 0af75233cc3f591575f857eaf0e62f9ab3b10f2c)
@@ -32,3 +32,53 @@
 BLOOD_PRIMING_TEXT = "Blood Priming"
 SALINE_UNIT = "mL"
 BLOOD_PRIMING_DEFAULT_VALUE = "0 mL"
+
+
+# dictionary of rejection reason from application source code.
+# message location -> denali-> Headers-> common-> MsgDefs.h
+REJECTION_MESSAGE = {
+    0 : "REQUEST_REJECT_REASON_NONE" ,                                                                   # Used when there is no rejection
+    1 : "REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE" ,                                            # "REQuest is not allowed in the current operating mode
+    2 : "REQUEST_REJECT_REASON_TIMEOUT_WAITING_FOR_USER_CONFIRM" ,                                       # Validated "REQuest was not confirmed by user in reasonable time
+    3 : "REQUEST_REJECT_REASON_NOT_IN_TREATMENT_MODE" ,                                                  # "REQuest is not allowed if not in treatment mode
+    4 : "REQUEST_REJECT_REASON_INVALID_TREATMENT_STATE" ,                                                # "REQuest is not allowed in current treatment state
+    5 : "REQUEST_REJECT_REASON_TREATMENT_TOO_CLOSE_TO_FINISHED" ,                                        # "REQuest is not allowed so near end of treatment
+    6 : "REQUEST_REJECT_REASON_TREATMENT_TIME_OUT_OF_RANGE" ,                                            # Treatment duration is out of range
+    7 : "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_CURRENT" ,                                       # Treatment time change is less than currently elapsed treatment time
+    8 : "REQUEST_REJECT_REASON_BLOOD_FLOW_OUT_OF_RANGE" ,                                                # Blood flow is out of range
+    9 : "REQUEST_REJECT_REASON_DIAL_FLOW_OUT_OF_RANGE" ,                                                 # Dialysate flow is out of range
+    10 : "REQUEST_REJECT_REASON_DIAL_VOLUME_OUT_OF_RANGE" ,                                              # Dialysate flow rate or treatment duration causes dialysate volume to exceed limit
+    11 : "REQUEST_REJECT_REASON_UF_VOLUME_OUT_OF_RANGE" ,                                                # Ultrafiltration volume is out of range
+    12 : "REQUEST_REJECT_REASON_UF_RATE_OUT_OF_RANGE" ,                                                  # Ultrafiltration rate is out of range
+    13 : "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_MINIMUM" ,                                      # Treatment time change is less than minimum treatment time
+    14 : "REQUEST_REJECT_REASON_UF_NOT_IN_PROGESS" ,                                                     # Ultrafiltration is not currently in progress
+    15 : "REQUEST_REJECT_REASON_UF_NOT_PAUSED" ,                                                         # Ultrafiltration is not currently paused
+    16 : "REQUEST_REJECT_REASON_SALINE_BOLUS_IN_PROGRESS" ,                                              # A saline bolus is in progress
+    17 : "REQUEST_REJECT_REASON_PARAM_OUT_OF_RANGE" ,                                                    # A treatment parameter is out of range
+    18 : "REQUEST_REJECT_REASON_HEPARIN_PRESTOP_EXCEEDS_DURATION" ,                                      # The Heparin pre-stop setting is greater than the treatment duration
+    19 : "REQUEST_REJECT_REASON_ARTERIAL_PRESSURE_LOW_VS_HIGH" ,                                         # Arterial pressure low and high alarm limits are not inconsistent
+    20 : "REQUEST_REJECT_REASON_VENOUS_PRESSURE_LOW_VS_HIGH" ,                                           # Venous pressure low and high alarm limits are inconsistent
+    21 : "REQUEST_REJECT_REASON_SALINE_MAX_VOLUME_REACHED" ,                                             # Saline bolus volume maximum has been reached - no more saline allowed
+    22 : "REQUEST_REJECT_REASON_SALINE_BOLUS_NOT_IN_PROGRESS" ,                                          # A saline bolus is not in progress
+    23 : "REQUEST_REJECT_REASON_ACTION_DISABLED_IN_CURRENT_STATE" ,                                      # "REQuested user action is disabled in current state
+    24 : "REQUEST_REJECT_REASON_ALARM_IS_ACTIVE" ,                                                       # "REQuested user action not allowed while alarm is active
+    25 : "REQUEST_REJECT_REASON_INVALID_COMMAND" ,                                                       # "REQuested user action invalid
+    26 : "REQUEST_REJECT_REASON_TREATMENT_IS_COMPLETED" ,                                                # The treatment has been completed
+    27 : "REQUEST_REJECT_REASON_ADDL_RINSEBACK_MAX_VOLUME_REACHED" ,                                     # Rinseback additional volume maximum has been reached - no more additional rinsebacks allowed
+    28 : "REQUEST_REJECT_REASON_UF_VOLUME_NOT_SET" ,                                                     # Ultrafiltration volume is not set yet
+    29 : "REQUEST_REJECT_REASON_NO_PATIENT_CONNECTION_CONFIRM" ,                                         # The user has not confirmed patient connection
+    30 : "REQUEST_REJECT_REASON_HEPARIN_PAUSE_INVALID_IN_THIS_STATE" ,                                   # Heparin cannot be paused if not currently deliverying Heparin
+    31 : "REQUEST_REJECT_REASON_HEPARIN_NOT_PAUSED" ,                                                    # Heparin cannot be resumed if not paused
+    32 : "REQUEST_REJECT_REASON_DG_COMM_LOST" ,                                                          # Treatment cannot initiate if DG comm is lost
+    33 : "REQUEST_REJECT_REASON_DRAIN_NOT_COMPLETE" ,                                                    # Post-treatment reservoirs drain not complete
+    34 : "REQUEST_REJECT_REASON_DG_NOT_IN_STANDBY_IDLE_STATE" ,                                          # Treatment cannot initiate if DG is not in standby idle state
+    35 : "REQUEST_REJECT_REASON_INVALID_REQUEST_FORMAT" ,                                                # "REQuest message not formatted properly
+    36 : "REQUEST_REJECT_REASON_INVALID_DATE_OR_TIME" ,                                                  # Given date/time is invalid
+    37 : "REQUEST_REJECT_REASON_NO_NEW_TREATMENT_ALARM_TRIGGERED" ,                                      # Treatment cannot initiate if an alarm with no new treatment property has triggered before
+    38 : "REQUEST_REJECT_REASON_BATTERY_IS_NOT_CHARGED" ,                                                # Battery does not have enough charge to start treatment
+    39 : "REQUEST_REJECT_REASON_RINSEBACK_NOT_COMPLETED" ,                                               # Cannot move on to recirculate without completing full rinseback.
+    }
+
+NUM_OF_REQUEST_REJECT_REASONS      = 39
+
+