Index: shared/scripts/configuration/config.py =================================================================== diff -u -r941ef3c2c59d7977c23dd37a7af68a3aa84a60a9 -ra8733c83079729c2fcc6b90449ffd9483ae6d64c --- shared/scripts/configuration/config.py (.../config.py) (revision 941ef3c2c59d7977c23dd37a7af68a3aa84a60a9) +++ shared/scripts/configuration/config.py (.../config.py) (revision a8733c83079729c2fcc6b90449ffd9483ae6d64c) @@ -49,242 +49,3 @@ BLOOD_PRESSURE_UNIT = "mmHg" HEART_RATE_UNIT = "BPM" - -KEYBOARD_SWITCH = ["ABC", "&123"] - -REJECTION_REASON = { - 0: "No Active Alarm List", - 1: "REQUEST_REJECT_REASON_NOT_ALLOWED_IN_CURRENT_MODE", # Request is not allowed in the current operating mode - 2: "REQUEST_REJECT_REASON_TIMEOUT_WAITING_FOR_USER_CONFIRM", # Validated request was not confirmed by user in reasonable time - 3: "REQUEST_REJECT_REASON_NOT_IN_TREATMENT_MODE", # Request is not allowed if not in treatment mode - 4: "REQUEST_REJECT_REASON_INVALID_TREATMENT_STATE", # Request is not allowed in current treatment state - 5: "REQUEST_REJECT_REASON_TREATMENT_TOO_CLOSE_TO_FINISHED", # Request is not allowed so near end of treatment - 6: "REQUEST_REJECT_REASON_TREATMENT_TIME_OUT_OF_RANGE", # Treatment duration is out of range - 7: "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_CURRENT", # Treatment time change is less than currently elapsed treatment time - 8: "REQUEST_REJECT_REASON_BLOOD_FLOW_OUT_OF_RANGE", # Blood flow is out of range - 9: "REQUEST_REJECT_REASON_DIAL_FLOW_OUT_OF_RANGE", # Dialysate flow is out of range - 10: "REQUEST_REJECT_REASON_DIAL_VOLUME_OUT_OF_RANGE", # Dialysate flow rate or treatment duration causes dialysate volume to exceed limit - 11: "REQUEST_REJECT_REASON_UF_VOLUME_OUT_OF_RANGE", # Ultrafiltration volume is out of range - 12: "REQUEST_REJECT_REASON_UF_RATE_OUT_OF_RANGE", # Ultrafiltration rate is out of range - 13: "REQUEST_REJECT_REASON_TREATMENT_TIME_LESS_THAN_MINIMUM", # Treatment time change is less than minimum treatment time - 14: "REQUEST_REJECT_REASON_UF_NOT_IN_PROGESS", # Ultrafiltration is not currently in progress - 15: "REQUEST_REJECT_REASON_UF_NOT_PAUSED", # Ultrafiltration is not currently paused - 16: "REQUEST_REJECT_REASON_SALINE_BOLUS_IN_PROGRESS", # A saline bolus is in progress - 17: "REQUEST_REJECT_REASON_PARAM_OUT_OF_RANGE", # A treatment parameter is out of range - 18: "REQUEST_REJECT_REASON_HEPARIN_PRESTOP_EXCEEDS_DURATION", # The Heparin pre-stop setting is greater than the treatment duration - 19: "REQUEST_REJECT_REASON_ARTERIAL_PRESSURE_LOW_VS_HIGH", # Arterial pressure low and high alarm limits are not inconsistent - 20: "REQUEST_REJECT_REASON_VENOUS_PRESSURE_LOW_VS_HIGH", # Venous pressure low and high alarm limits are inconsistent - 21: "REQUEST_REJECT_REASON_SALINE_MAX_VOLUME_REACHED", # Saline bolus volume maximum has been reached - no more saline allowed - 22: "REQUEST_REJECT_REASON_SALINE_BOLUS_NOT_IN_PROGRESS", # A saline bolus is not in progress - 23: "REQUEST_REJECT_REASON_ACTION_DISABLED_IN_CURRENT_STATE", # Requested user action is disabled in current state - 24: "REQUEST_REJECT_REASON_ALARM_IS_ACTIVE", # Requested user action not allowed while alarm is active - 25: "REQUEST_REJECT_REASON_INVALID_COMMAND", # Requested user action invalid - 26: "REQUEST_REJECT_REASON_TREATMENT_IS_COMPLETED", # The treatment has been completed - 27: "REQUEST_REJECT_REASON_ADDL_RINSEBACK_MAX_VOLUME_REACHED", # Rinseback additional volume maximum has been reached - no more additional rinsebacks allowed - 28: "REQUEST_REJECT_REASON_UF_VOLUME_NOT_SET", # Ultrafiltration volume is not set yet - 29: "REQUEST_REJECT_REASON_NO_PATIENT_CONNECTION_CONFIRM", # The user has not confirmed patient connection - 30: "REQUEST_REJECT_REASON_HEPARIN_PAUSE_INVALID_IN_THIS_STATE", # Heparin cannot be paused if not currently deliverying Heparin - 31: "REQUEST_REJECT_REASON_HEPARIN_NOT_PAUSED", # Heparin cannot be resumed if not paused - 32: "REQUEST_REJECT_REASON_DG_COMM_LOST", # Treatment cannot initiate if DG comm is lost - 33: "REQUEST_REJECT_REASON_DRAIN_NOT_COMPLETE", # Post-treatment reservoirs drain not complete - 34: "REQUEST_REJECT_REASON_DG_NOT_IN_STANDBY_IDLE_STATE", # Treatment cannot initiate if DG is not in standby idle state - 35: "REQUEST_REJECT_REASON_INVALID_REQUEST_FORMAT", # Request message not formatted properly - 36: "REQUEST_REJECT_REASON_INVALID_DATE_OR_TIME", # Given date/time is invalid - 37: "REQUEST_REJECT_REASON____AVAILABLE_1", # Not used - available for use - 38: "REQUEST_REJECT_REASON_BATTERY_IS_NOT_CHARGED", # Battery does not have enough charge to start treatment - 39: "REQUEST_REJECT_REASON_RINSEBACK_NOT_COMPLETED", # Cannot move on to recirculate without completing full rinseback. - 40: "REQUEST_REJECT_REASON_RESERVOIR_ONE_IS_NOT_READY", # Reservoir one fill is not complete - 41: "REQUEST_REJECT_REASON_PUMP_TRACK_NOT_CLOSED", # Pump track is not ready / closed - 42: "REQUEST_REJECT_REASON_DOOR_NOT_CLOSED", # Door is not closed - 43: "REQUEST_REJECT_REASON_SYRINGE_NOT_PRESENT", # Syringe is not present - } - -NUM_OF_REQUEST_REJECT_REASONS = 43 - - - -#create custom treatment -PATIENT_ID = "demopatientid" -TREATMENT_TITLE = "Create a Custom Treatment" -HEPARIN_TYPE = "UFH 1,000 IU/mL" -ACID_CONCENTRATE = ["Fres. Naturalyte", "08-1251-1", "08-2251-0", "08-3251-9"] -BICARBONATE_CONCENTRATE = "Fres. Centrisol" -DIALYZER_TYPE = ["BB Diacap Pro 13H", "BB Diacap Pro 16H", "BB Diacap Pro 19H", "F Optiflux F160NRe", "F Optiflux F180NRe"] -CONFIRM_TREATMENT_TITLE = "Confirm Treatment" -PRESCRIPTION_TITLE = "PRESCRIPTION" -OPERATING_PARAMETERS_TITLE = "OPERATING PARAMETERS" -COLOR_CODES = {"Aqua": "#81ffff", "Blue": "#017dea", "Blue 2": "#1090d5", "Green": "#29fd2d", "Grey": "#d3d3d3", - "Lavender": "#db98f5", "Light Blue": "#acd7f1", "Light Teal": "#29f1da","Lime": "#b7fc36", - "Magenta":"#fd28fd", "Orange": "#f2721c", "Peach":"#f1979a", "Red": "#c53b33", "Rose":"#fc178d", - "Slate blue":"#7f7ffa", "Violet": "#6435c9", "White": "#ffffff", "Yellow": "#fcfc4d"} - -CURRENT_COLOR = '#000000' -COMPLETE_COLOR= '#4290ec' -ENABLED_COLOR = '#fcfcfc' -INCOMPLETE_COLOR = '#607a91' -PATIENT_ID_TEXT = "Patient ID" -PATIENT_ID = "demopatientid" -BLOOD_FLOW_RATE = "Blood Flow Rate" -DIALYSATE_FLOW_RATE = "Dialysate Flow Rate" -DURATION = "Duration" -HEPARIN_DISPENSING_RATE = "Heparin Dispensing Rate" -HEPARIN_BOLUS_VOLUME = "Heparin Bolus Volume" -HEPARIN_STOP_TIME = "Heparin Stop Time" -SALINE_BOLUS_VOLUME = "Saline Bolus Volume" -HEPARIN_TYPE_TITLE = "Heparin Type" -SALINE_BOLUS_TITLE = "Saline Bolus" -ACID_CONCENTRATE_TITLE = "Acid Concentrate" -BICARBONATE_CONCENTRATE_TITLE = "Bicarbonate Concentrate" -DIALYZER_TYPE_TITLE = "Dialyzer Type" -DIALYSATE_TEMPERATURE = "Dialysate Temperature" -BLOOD_PRESSURE_MEASUREMENT_INTERVAL = "Blood Pressure Measurement Interval" -RINSEBACK_FLOW_RATE = "Rinseback Flow Rate" - -CREATE_TREATMENT_PARAMETERS = ["Blood Flow Rate", "Dialysate Flow Rate", "Duration","Heparin Dispensing Rate", - "Heparin Bolus Volume","Heparin Stop Time", "Saline Bolus", "Dialysate Temperature", - "Blood Pressure Measurement Interval", "Rinseback Flow Rate"] -TREATMENT_UNHIGHLIGHTED_COLOR = "#000000" -TREATMENT_HIGHLIGHTED_COLOR = "#135088" -OFF_TEXT = "OFF" -BACK_TEXT = "BACK" -CONTINUE_TEXT = "CONTINUE" - -PRESCRIPTION_DETAILS = { - "Blood Flow Rate": "mL/min", "Dialysate Flow Rate": "mL/min", - "Duration": "min", "Heparin Dispensing Rate": "mL/hr", - "Heparin Bolus Volume": "mL", "Heparin Stop Time": "min", - "Saline Bolus Volume": "mL", - "Dialysate Temperature": "°C", "Arterial Pressure Limit Low": "mmHg", - "Arterial Pressure Limit High": "mmHg","Blood Pressure Measure Interval":"min", - "Rinseback Rate" : "mL/min", "Venous Pressure Limit High": "mmHg", - "Venous Pressure Limit Low": "mmHg" -} - -OPERATIONAL_PARAMETERS = {"Heparin Type": HEPARIN_TYPE, "Acid Concentrate": "Fres. Naturalyte", - "Bicarbonate Concentrate": BICARBONATE_CONCENTRATE, "Dialyzer Type": "BB Diacap Pro 16H"} - - -#create custom treatment -HIGHER_VALUE_OF_BLOOD_FLOW_RATE = 500 -LOWER_VALUE_OF_BLOOD_FLOW_RATE = 100 -STEP_VALUE_OF_BLOOD_FLOW_RATE = 25 -BUFFER_LOW_AND_HIGH_LIMITS = 30 -ARTERIAL_VALUE_0 = 0 -ARTERIAL_VALUE_NEGATIVE_300 = -300 -ARTERIAL_VALUE_NEGATIVE_20 = -20 -ARTERIAL_VALUE_NEGATIVE_270 = -270 -VENOUS_VALUE_600 = 600 -VENOUS_VALUE_20 = 20 -VENOUS_VALUE_50 = 50 -VENOUS_VALUE_570 = 570 -POSITIVE_BUFFER = 10 -NEGATIVE_BUFFER = -10 - -#dictionary consist of custom treatment values -CREATE_CUSTOM_TREATMENT = { - "Blood Flow Rate": 250, - "Dialysate Flow Rate": 400, - "Duration": 270, - "Heparin Dispensing Rate": 0.5, - "Heparin Bolus Volume": 1, - "Heparin Stop Time": 100, - "Saline Bolus Volume": 200, - "Dialysate Temperature": 37, - "Blood Pressure Measurement Interval": 40, - "Rinseback Flow Rate": 100, - "Arterial Pressure Limit Low" : -30, - "Arterial Pressure Limit High" : 0, - "Blood Pressure Measure Interval" : 40, - "Rinseback Rate" : 100, - "Venous Pressure Limit High" : 590, - "Venous Pressure Limit Low": 560 - -} - -#dictionary consist of slider values of treatment parameters -CREATE_TREATMENT_PARAMETER_RANGE = { - "Blood Flow Rate": [100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500], - "Dialysate Flow Rate": [100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600], - "Duration": [60, 75, 90, 105, 120, 135, 150, 165, 180, 195, 240, 255, 270, 285, 300, 315, 330, 345, 360, 375, 390, 405, 420, 435, 450, 465, 480], - "Heparin Dispensing Rate": [0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 0], - "Heparin Bolus Volume": [0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2, 0], - "Heparin Stop Time": [0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 0], - "Saline Bolus Volume": [100, 200, 300], - "Dialysate Temperature": [35.0, 35.5, 36.0, 36.5, 37.0], - "Blood Pressure Measurement Interval": [0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 0], - "Rinseback Flow Rate": [50, 75, 100, 125, 150], -} - -#dictionary consist of slider minimum value, slider buffer value, width buffer of slider -CREATE_TREATMENT_SLIDER_VALUES = { - - "blood_flow_rate" : [100, 25, 46], - "dialysate_flow_rate" : [100, 50, 75], - "duration" : [60, 15, 26.6], - "heparin_dispensing_rate" : [0, 0.1, 75], - "heparin_bolus_volume" : [0, 0.1, 37], - "heparin_stop_time" : [0, 10, 15.9], - "saline_bolus" : [100, 100, 375], - "dialysate_temperature" : [35, 0.5, 187.5], - "arterial_pressure_limit_high" : [20, 10, 11.931], - "blood_pressure_measurement_interval" : [0, 5, 62], - "rinseback_flow_rate" : [50, 25, 187], -} - -# pretreatment_patient_connection -SYSTOLIC_PRESSSURE_120 = 120 -SYSTOLIC_PRESSSURE_113 = 113 -SYSTOLIC_PRESSSURE_150 = 150 -SYSTOLIC_PRESSSURE_175 = 175 -SYSTOLIC_PRESSSURE_200 = 200 -SYSTOLIC_PRESSSURE_200 = 200 -SYSTOLIC_PRESSSURE_251 = 251 -SYSTOLIC_PRESSSURE_59 = 59 -SYSTOLIC_PRESSSURE_15 = 15 -DIASTOLIC_PRESSSURE_25 = 25 -DIASTOLIC_PRESSSURE_39 = 39 -DIASTOLIC_PRESSSURE_74 = 74 -DIASTOLIC_PRESSSURE_80 = 80 -DIASTOLIC_PRESSSURE_85 = 85 -DIASTOLIC_PRESSSURE_60 = 60 -DIASTOLIC_PRESSSURE_150 = 150 -DIASTOLIC_PRESSSURE_200 = 200 -DIASTOLIC_PRESSSURE_201 = 201 -HEART_RATE_VAL_39 = 39 -HEART_RATE_VAL_60 = 60 -HEART_RATE_VAL_70 = 70 -HEART_RATE_VAL_85 = 85 -HEART_RATE_VAL_100 = 100 -HEART_RATE_VAL_101 = 101 -HEART_RATE_VAL_110 = 110 -HEART_RATE_VAL_181 = 181 -HEART_RATE_VAL_200 = 200 -SYSTOLIC_LOWER_LIMIT = 60 -SYSTOLIC_UPPER_LIMIT = 250 -DIASTOLIC_LOWER_LIMIT = 40 -DIASTOLIC_UPPER_LIMIT = 200 -HEART_RATE_LOWER_LIMIT = 40 -HEART_RATE_UPPER_LIMIT = 180 - -# pretreatment_patient_connection -DIASTOLIC_TEXT = "diastolic" -SYSTOLIC_TEXT = "systolic" -OUT_OF_RANGE_COLOR = "#c53b33" -IN_RANGE_COLOR = "#fcfcfc" -HEART_RATE_TITLE = "Heart Rate" -BLOOD_PRESSURE_TITLE = "Blood Pressure" -BLOOD_PRESSURE_UNIT = "mmHg" -HEART_RATE_UNIT = "BPM" -PATIENT_CONNECTION_TEXT = "Patient Connection" -UF_VOLUME_TEXT = "Ultrafiltration Volume (L)" -UF_TITLE_TEXT = "Ultrafiltration Setup" -BP_HR_TEXT = "BP/HR" -SKIP_TEXT = "SKIP" -TUTORIAL_TEXT = { - 0 : "Wash your hands and establish vascular access per your clinic's instructions.", - 1 : "Pinch arterial clamp and venous clamp on located on the cartridge patient lines.", - 2 : "Remove arterial and venous shunt.", - 3 : "Connect arterial and venous cartridge lines to your patient access lines." -} - -PRE_TREATMENT_SCREENS = ["Create" , "Sample" , "Consumables" , "Disposables" , "Prime" , "Ultrafiltration" , "BP/HR" , "Connection" , "Start"] \ No newline at end of file