Index: tst_ui_logs/test.py =================================================================== diff -u -r763c81a696187aea9bc076c1fc07f236446aae6b -rf8128de4d1ee087822fdc851e7cadb442075f73c --- tst_ui_logs/test.py (.../test.py) (revision 763c81a696187aea9bc076c1fc07f236446aae6b) +++ tst_ui_logs/test.py (.../test.py) (revision f8128de4d1ee087822fdc851e7cadb442075f73c) @@ -1,32 +1,52 @@ # -*- coding: utf-8 -*- -# from dialin.hd.alarms import * -# from dialin.ui.hd_simulator_alarms import HDAlarmsSimulator, NONE -# import logging -# from dialin.protocols.CAN import DenaliCanMessenger + +## +# Copyright (c) 2019-2020 Diality Inc. - All Rights Reserved. +# copyright +# THIS CODE MAY NOT BE COPIED OR REPRODUCED IN ANY FORM, +# IN PART OR IN WHOLE, +# WITHOUT THE EXPLICIT PERMISSION OF THE COPYRIGHT OWNER. +# +# file tst_UI_log_verification +# date 2022/04/09 +# author Bhavana Savanth +# author Amol Pandharinath Shinde +# author Amrita Debnath +# author Sai Chaitanya Ela +# author Akshay Rajaram +# + +# NOTE: +# This test verifies the logs for the messages provided + +from dialin.ui.hd_simulator_alarms import HDAlarmsSimulator +import logging +from dialin.protocols.CAN import DenaliCanMessenger from dialin.ui import HDSimulator from dialin.ui import DGSimulator from dialin.ui import utils -# from dialin.hd.ui_proxy import HDUIProxy from configuration import utility from configuration import config import builtins -# from email import message -from dialin.ui.utils import waitForGUI from dialin.common.msg_ids import MsgIds -hd = HDSimulator() -dg = DGSimulator() +logger= logging.getLogger("INFO") +messenger= DenaliCanMessenger('can0') -yes = 'Y' +hd_alarm= HDAlarmsSimulator(can_interface=messenger, logger=logger) +hd_simulator = HDSimulator() +dg_simulator = DGSimulator() +YES = 'Y' + def verify_log(msg_id, ack = None, msg = None): utils.waitForGUI(0.1) message_extracted = utility.get_current_log_details(message_ack = ack, message_text = msg) - if ack == yes: + if ack == YES: test.verify(config.ACK_REQ_STATUS in message_extracted, "ack request is verified") test.verify(config.ACK_BAK_STATUS in message_extracted, "ack back is verified") -# if msg != None: +# if msg != None: # test.verify(msg in message_extracted, "message is verified") message_id_hex = builtins.hex(builtins.int(msg_id)) @@ -42,190 +62,635 @@ #HD Broadcast #0x0D00 - hd.cmd_set_treatment_time(200,60) - verify_log(msg_id = MsgIds.MSG_ID_TREATMENT_TIME.value, ack = yes, msg = "TreatmentTime") + hd_simulator.cmd_set_treatment_time(200,60) + verify_log(msg_id = MsgIds.MSG_ID_TREATMENT_TIME.value, ack = YES, msg = "TreatmentTime") #0x0500 - hd.cmd_set_treatment_blood_flow_rate(flow_set_pt=20, measured_flow=10.5, + hd_simulator.cmd_set_treatment_blood_flow_rate(flow_set_pt=20, measured_flow=10.5, rot_speed = 112.2 , mot_speed = 120.3, mc_speed = 100.0, mc_current = 12.5, pwm = 32.3, rotor_count = 30) - verify_log(msg_id = MsgIds.MSG_ID_BLOOD_FLOW_DATA.value, ack = yes, msg = "BloodFlow") + verify_log(msg_id = MsgIds.MSG_ID_BLOOD_FLOW_DATA.value, ack = YES, msg = "BloodFlow") #0x0800 - hd.cmd_set_treatment_dialysate_flow_rate(flow_set_pt=20, measured_flow=10.5, + hd_simulator.cmd_set_treatment_dialysate_flow_rate(flow_set_pt=20, measured_flow=10.5, rot_speed = 112.2 , mot_speed = 120.3, mc_speed = 100.0, mc_current = 12.5, pwm = 32.3) - verify_log(msg_id = MsgIds.MSG_ID_DIALYSATE_FLOW_DATA.value, ack = yes, msg = "DialysateFlow") + verify_log(msg_id = MsgIds.MSG_ID_DIALYSATE_FLOW_DATA.value, ack = YES, msg = "DialysateFlow") #0x0900 - hd.cmd_set_pressure_occlusion_data(arterial_prs = 54.5, venous_prs = 20.1, blood_pump_occlusion = 3, + hd_simulator.cmd_set_pressure_occlusion_data(arterial_prs = 54.5, venous_prs = 20.1, blood_pump_occlusion = 3, dialysate_inlet_pump_occlusion = 2, dialysate_outlet_pump_occlusion = 5) - verify_log(msg_id = MsgIds.MSG_ID_PRESSURE_OCCLUSION_DATA.value, ack = yes, msg = "Pressure/Occlusion") + verify_log(msg_id = MsgIds.MSG_ID_PRESSURE_OCCLUSION_DATA.value, ack = YES, msg = "Pressure/Occlusion") #0x0B00 - hd.cmd_set_treatment_ultrafiltration_outlet_flow_data(ref_uf_vol = 77.5, measured_uf_vol = 22.6, + hd_simulator.cmd_set_treatment_ultrafiltration_outlet_flow_data(ref_uf_vol = 77.5, measured_uf_vol = 22.6, rot_speed = 54.0, mot_speed = 66.2, mc_speed = 33.3, mc_current = 21.2, pwm = 322.2) - verify_log(msg_id = MsgIds.MSG_ID_DIALYSATE_OUT_FLOW_DATA.value, ack = yes, msg = "OutletFlow") + verify_log(msg_id = MsgIds.MSG_ID_DIALYSATE_OUT_FLOW_DATA.value, ack = YES, msg = "OutletFlow") #0x1A00 - hd.cmd_set_treatment_parameter_ranges(min_treatment_duration = 300, max_treatment_duration = 500, + hd_simulator.cmd_set_treatment_parameter_ranges(min_treatment_duration = 300, max_treatment_duration = 500, min_uf_volume = 22.6, max_uf_volume = 34.2, min_dialysate_flow_rate = 3, max_dialysate_flow_rate = 5) - verify_log(msg_id = str(MsgIds.MSG_ID_TREATMENT_PARAM_CHANGE_RANGES.value), ack = yes, msg = "TreatmentRanges") + verify_log(msg_id = str(MsgIds.MSG_ID_TREATMENT_PARAM_CHANGE_RANGES.value), ack = YES, msg = "TreatmentRanges") #0x2F00 - hd.cmd_set_treatment_saline_bolus_data(target = 2, cumulative = 90.0, delivered = 67.2) - verify_log(msg_id = MsgIds.MSG_ID_SALINE_BOLUS_DATA.value, ack = yes, msg = "Saline") + hd_simulator.cmd_set_treatment_saline_bolus_data(target = 2, cumulative = 90.0, delivered = 67.2) + verify_log(msg_id = MsgIds.MSG_ID_SALINE_BOLUS_DATA.value, ack = YES, msg = "Saline") #0x4D00 - hd.cmd_set_treatment_heparin_data(cumulative = 4) - verify_log(msg_id = MsgIds.MSG_ID_HD_HEPARIN_DATA_BROADCAST.value, ack = yes, msg = "Heparin") + hd_simulator.cmd_set_treatment_heparin_data(cumulative = 4) + verify_log(msg_id = MsgIds.MSG_ID_HD_HEPARIN_DATA_BROADCAST.value, ack = YES, msg = "Heparin") #0x3300 - hd.cmd_send_accelerometer_hd_data(x = 12.3, y = 22.2, z = 4.0, + hd_simulator.cmd_send_accelerometer_hd_data(x = 12.3, y = 22.2, z = 4.0, x_max = 14.0, y_max = 30.2, z_max = 10.5, x_tilt = 11.0, y_tilt = 22.1, z_tilt = 5.5) - verify_log(msg_id = MsgIds.MSG_ID_HD_ACCELEROMETER_DATA.value, ack = yes, msg = "Accel") + verify_log(msg_id = MsgIds.MSG_ID_HD_ACCELEROMETER_DATA.value, ack = YES, msg = "Accel") #0x3A00 - hd.cmd_send_hd_general_response(message_id = 58, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_VALVES_DATA.value, ack = yes, msg = "~HD_Valves_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 58, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_VALVES_DATA.value, ack = YES, msg = "~HD_Valves_Data") #0x3E00 - #hd.cmd_send_hd_general_response(message_id = 62, accepted = 1, reason = 1) - hd.cmd_send_hd_air_trap_data(lower_level = 1, upper_level = 10) - verify_log(msg_id = MsgIds.MSG_ID_HD_AIR_TRAP_DATA.value, ack = yes, msg = "AirTrap") + #hd_simulator.cmd_send_hd_general_response(message_id = 62, accepted = 1, reason = 1) + hd_simulator.cmd_send_hd_air_trap_data(lower_level = 1, upper_level = 10) + verify_log(msg_id = MsgIds.MSG_ID_HD_AIR_TRAP_DATA.value, ack = YES, msg = "AirTrap") #0x6900 - hd.cmd_send_hd_general_response(message_id = 105, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_SYRINGE_PUMP_DATA.value, ack = yes) + hd_simulator.cmd_send_hd_general_response(message_id = 105, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_SYRINGE_PUMP_DATA.value, ack = YES) #0x6A00 - hd.cmd_send_hd_general_response(message_id = 106, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_FLUID_LEAK_STATE.value, ack = yes, msg = "~HD_Fluid_Leak_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 106, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_FLUID_LEAK_STATE.value, ack = YES, msg = "~HD_Fluid_Leak_Data") #0x6C00 - hd.cmd_send_hd_blood_leak_data(blood_leak_status = 0, blood_leak_state = 1, + hd_simulator.cmd_send_hd_blood_leak_data(blood_leak_status = 0, blood_leak_state = 1, blood_leak_zero_status_counter = 2, blood_leak_counter = 3, blood_leak_zeroed_status = 2, blood_leak_detect_set_point = 1, blood_leak_detect_level = 1, blood_leak_st_count = 1, blood_leak_led_intensity = 2, blood_leak_register_counter = 3) - verify_log(msg_id = MsgIds.MSG_ID_HD_BLOOD_LEAK_DATA.value, ack = yes, msg = "BloodLeak") + verify_log(msg_id = MsgIds.MSG_ID_HD_BLOOD_LEAK_DATA.value, ack = YES, msg = "BloodLeak") #0x9300 - hd.cmd_send_hd_air_bubble_data(venous_air_bubble_status = 2, venous_air_bubble_state = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_BUBBLES_DATA.value, ack = yes, msg = "AirBubble") + hd_simulator.cmd_send_hd_air_bubble_data(venous_air_bubble_status = 2, venous_air_bubble_state = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_BUBBLES_DATA.value, ack = YES, msg = "AirBubble") #0x7B00 - hd.cmd_send_hd_general_response(message_id = 123, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_VOLTAGES_DATA.value, ack = yes, msg = "~HD_Voltages_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 123, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_VOLTAGES_DATA.value, ack = YES, msg = "~HD_Voltages_Data") #0x7D00 - hd.cmd_send_hd_general_response(message_id = 125, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_ALARM_INFORMATION.value, ack = yes, msg = "~HD_Alarm_Information") + hd_simulator.cmd_send_hd_general_response(message_id = 125, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_ALARM_INFORMATION.value, ack = YES, msg = "~HD_Alarm_Information") #0xA200 - hd.cmd_send_hd_general_response(message_id = 162, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_SWITCHES_DATA.value, ack = yes, msg = "~HD_Switches_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 162, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_SWITCHES_DATA.value, ack = YES, msg = "~HD_Switches_Data") #0x9D00 - hd.cmd_send_hd_general_response(message_id = 157, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_TEMPERATURES_DATA.value, ack = yes, msg = "~HD_Temperature_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 157, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_TEMPERATURES_DATA.value, ack = YES, msg = "~HD_Temperature_Data") #0xA300 - hd.cmd_send_hd_general_response(message_id = 163, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_FANS_DATA.value, ack = yes, msg = "~HD_Fans_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 163, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_FANS_DATA.value, ack = YES, msg = "~HD_Fans_Data") #0xA800 - hd.cmd_send_hd_general_response(message_id = 168, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_RESERVOIRS_DATA.value, ack = yes, msg = "~HD_Reservoirs_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 168, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_RESERVOIRS_DATA.value, ack = YES, msg = "~HD_Reservoirs_Data") #HD Operation Mode #0x2500 for mode in range(9): - hd.cmd_send_hd_operation_mode(op_mode = mode) - verify_log(msg_id = MsgIds.MSG_ID_HD_OP_MODE.value, ack = yes, msg = "OpMode") + hd_simulator.cmd_send_hd_operation_mode(op_mode = mode) + verify_log(msg_id = MsgIds.MSG_ID_HD_OP_MODE.value, ack = YES, msg = "OpMode") #0x5C00 for s_mode in range(9): - hd.cmd_send_pre_treatment_state_data(sub_mode = s_mode, water_sample_state = 0, consumables_self_test_state = 0, + hd_simulator.cmd_send_pre_treatment_state_data(sub_mode = s_mode, water_sample_state = 0, consumables_self_test_state = 0, no_cartridge_self_test_state = 0, installation_state = 0, dry_self_test_state = 0, prime_state = 0, recirculate_state = 0, patient_connection_state = 0) - verify_log(msg_id = MsgIds.MSG_ID_PRE_TREATMENT_STATE.value, ack = yes, msg = "PreTreatmentStates") + verify_log(msg_id = MsgIds.MSG_ID_PRE_TREATMENT_STATE.value, ack = YES, msg = "PreTreatmentStates") #0x0F00 for s_mode in range(3): - hd.cmd_set_treatment_states_data(sub_mode = s_mode, uf_state = 0, saline_state = 0, heparin_state = 0, + hd_simulator.cmd_set_treatment_states_data(sub_mode = s_mode, uf_state = 0, saline_state = 0, heparin_state = 0, rinseback_state = 0, recirculate_state = 0, blood_prime_state = 0, treatment_end_state = 0, treatment_stop_state = 0, dialysis_state = 0) - verify_log(msg_id = MsgIds.MSG_ID_TREATMENT_STATE.value, ack = yes, msg = "TreatmentStates") + verify_log(msg_id = MsgIds.MSG_ID_TREATMENT_STATE.value, ack = YES, msg = "TreatmentStates") #0x7700 #for s_mode in range(3): - hd.cmd_send_hd_general_response(message_id = 119, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_POST_TREATMENT_STATE.value, ack = yes, msg = "PostTreatmentStates") + hd_simulator.cmd_send_hd_general_response(message_id = 119, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_POST_TREATMENT_STATE.value, ack = YES, msg = "PostTreatmentStates") #0x7E00 for s_mode in range(3): - hd.cmd_send_hd_disinfection_state(sub_mode = s_mode, flush_mode = 0, heat_mode = 0, chemical_mode = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_DISINFECT_STANDBY_DATA.value, ack = yes, msg = "DisinfectStates") + hd_simulator.cmd_send_hd_disinfection_state(sub_mode = s_mode, flush_mode = 0, heat_mode = 0, chemical_mode = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_DISINFECT_STANDBY_DATA.value, ack = YES, msg = "DisinfectStates") #0x9A00 UI-HD #0x9B00 -# hd.cmd_send_hd_disinfect_response(accepted = True, reason =1) - hd.cmd_send_hd_general_response(message_id = 155, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_SET_STANDBY_DISINFECT_SUB_MODE_RESPONSE.value, ack = yes, msg = "~HD_Set_Standby_Disinfect_State_Response") +# hd_simulator.cmd_send_hd_disinfect_response(accepted = True, reason =1) + hd_simulator.cmd_send_hd_general_response(message_id = 155, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_SET_STANDBY_DISINFECT_SUB_MODE_RESPONSE.value, ack = YES, msg = "~HD_Set_Standby_Disinfect_State_Response") #RINSEBACK #0x5200 UI-HD #0x5300 - hd.cmd_send_treatment_adjust_rinseback_response(accepted = 1, reason = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_RINSEBACK_CMD_RESPONSE.value, ack = yes, msg = "AdjustRinseback") + hd_simulator.cmd_send_treatment_adjust_rinseback_response(accepted = 1, reason = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_RINSEBACK_CMD_RESPONSE.value, ack = YES, msg = "AdjustRinseback") #0x5400 #0x5500 - hd.cmd_send_treatment_adjust_recirculate_response(accepted = 1, reason = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_RECIRC_CMD_RESPONSE.value, ack = yes, msg = "AdjustRecirculate") + hd_simulator.cmd_send_treatment_adjust_recirculate_response(accepted = 1, reason = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_RECIRC_CMD_RESPONSE.value, ack = YES, msg = "AdjustRecirculate") #0x5600 - hd.cmd_send_treatment_rinseback_data(target_vol = 2.4, current_vol = 1.9, flow_rate = 1, timeout = 4, + hd_simulator.cmd_send_treatment_rinseback_data(target_vol = 2.4, current_vol = 1.9, flow_rate = 1, timeout = 4, timeout_countdown = 8, is_completed = False) - verify_log(msg_id = MsgIds.MSG_ID_HD_RINSEBACK_PROGRESS.value, ack = yes, msg = "Rinseback") + verify_log(msg_id = MsgIds.MSG_ID_HD_RINSEBACK_PROGRESS.value, ack = YES, msg = "Rinseback") #0x5A00 - hd.cmd_send_treatment_recirculate_data(timeout_total = 200, timeout_count_down = 100) - verify_log(msg_id = MsgIds.MSG_ID_HD_RECIRC_PROGRESS.value, ack = yes, msg = "Recirculate") + hd_simulator.cmd_send_treatment_recirculate_data(timeout_total = 200, timeout_count_down = 100) + verify_log(msg_id = MsgIds.MSG_ID_HD_RECIRC_PROGRESS.value, ack = YES, msg = "Recirculate") #0x5800 - hd.cmd_send_treatment_adjust_end_response(accepted = 1, reason = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_TX_END_CMD_RESPONSE.value, ack = yes, msg = "AdjustTxEnd") + hd_simulator.cmd_send_treatment_adjust_end_response(accepted = 1, reason = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_TX_END_CMD_RESPONSE.value, ack = YES, msg = "AdjustTxEnd") #0x5900 - hd.cmd_send_treatment_blood_prime_data(target = 22.2, current = 33.3) - verify_log(msg_id = MsgIds.MSG_ID_HD_BLOOD_PRIME_PROGRESS.value, ack = yes, msg = "BloodPrime") + hd_simulator.cmd_send_treatment_blood_prime_data(target = 22.2, current = 33.3) + verify_log(msg_id = MsgIds.MSG_ID_HD_BLOOD_PRIME_PROGRESS.value, ack = YES, msg = "BloodPrime") #0x4900 - hd.cmd_send_hd_general_response(message_id = 73, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_STOP_TIMER_DATA.value, ack = yes, msg = "Stop") + hd_simulator.cmd_send_hd_general_response(message_id = 73, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_STOP_TIMER_DATA.value, ack = YES, msg = "Stop") #RTC #0x0A00 - hd.cmd_send_hd_general_response(message_id = 10, accepted = 1, reason = 1) - verify_log(msg_id = MsgIds.MSG_ID_RTC_EPOCH.value, ack = yes, msg = "~HD_RTC_Epoch_Data") + hd_simulator.cmd_send_hd_general_response(message_id = 10, accepted = 1, reason = 1) + verify_log(msg_id = MsgIds.MSG_ID_RTC_EPOCH.value, ack = YES, msg = "~HD_RTC_Epoch_Data") #0x6E00 - hd.cmd_send_set_rtc_response(response = 1, reason = 0) - verify_log(msg_id = MsgIds.MSG_ID_HD_UI_SET_RTC_RESPONSE.value, ack = yes, msg = "AdjustHDDateTime") + hd_simulator.cmd_send_set_rtc_response(response = 1, reason = 0) + verify_log(msg_id = MsgIds.MSG_ID_HD_UI_SET_RTC_RESPONSE.value, ack = YES, msg = "AdjustHDDateTime") #0x7000 - dg.cmd_send_set_rtc_response(response = 1, reason = 0) - verify_log(msg_id = MsgIds.MSG_ID_DG_UI_SET_RTC_RESPONSE.value, ack = yes, msg = "AdjustDGDateTime") + dg_simulator.cmd_send_set_rtc_response(response = 1, reason = 0) + verify_log(msg_id = MsgIds.MSG_ID_DG_UI_SET_RTC_RESPONSE.value, ack = YES, msg = "AdjustDGDateTime") + + + #Service Information + #0x8A00 + hd_simulator._handler_system_usage_response() + verify_log(msg_id = MsgIds.MSG_ID_HD_SERVICE_SCHEDULE_DATA.value, ack = YES, msg = "ServiceDate") + + #0x8C00 + dg_simulator._handler_system_usage_response() + verify_log(msg_id = MsgIds.MSG_ID_DG_SERVICE_SCHEDULE_DATA.value, ack = YES, msg = "ServiceDate") + + #System Usage Information + #0x8B00 + hd_simulator.cmd_send_hd_general_response(message_id=139, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_HD_USAGE_DATA.value, ack = YES, msg = "~HD_Usage_Data") + + #0x8D00 + dg_simulator.cmd_send_dg_general_response(message_id=141, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_USAGE_DATA.value, ack = YES, msg = "~DG_Usage_Data") + + #DG Command + #0x2100 + hd_simulator.cmd_send_hd_general_response(message_id=33, accepted=0, reason=1) + verify_log(msg_id = MsgIds. MSG_ID_DG_SWITCH_RESERVOIR_CMD.value, ack = YES, msg = "~DG_Switch_Res_Cmd") + + #0x2200 + hd_simulator.cmd_send_hd_general_response(message_id=34, accepted=0, reason=1) + verify_log(msg_id = MsgIds. MSG_ID_DG_FILL_CMD.value, ack = YES, msg = "~DG_Fill_Cmd") + + #0x2300 + hd_simulator.cmd_send_hd_general_response(message_id=35, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_DRAIN_CMD.value, ack = YES, msg = "~DG_Drain_Cmd") + + #0x1900 + hd_simulator.cmd_send_hd_general_response(message_id=25, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_SET_DG_DIALYSATE_TEMP_TARGETS.value, ack = YES, msg = "~DG_Dialysate_Tgt_Temps") + + #0x2600 + hd_simulator.cmd_send_hd_general_response(message_id=38, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_STARTING_STOPPING_TREATMENT_CMD.value, ack = YES, msg = "~DG_Cmd") + + #0x2900 + hd_simulator.cmd_send_hd_general_response(message_id=41, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_SAMPLE_WATER_CMD.value, ack = YES, msg = "~DG_Sample_Water_Cmd") + + #0x2B00 + hd_simulator.cmd_send_hd_general_response(message_id=43, accepted=0, reason=1) + verify_log(msg_id = MsgIds. MSG_ID_DG_START_STOP_TRIMMER_HEATER_CMD.value, ack = YES, msg = "~DG_Trimmer_Htr_Cmd") + + #0x3000 + hd_simulator.cmd_send_hd_general_response(message_id=48, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_START_STOP_HEAT_DISINFECT.value, ack = YES, msg = "~DG_Heat_Disinfect_Cmd") + + #0x5B00 + hd_simulator.cmd_send_hd_general_response(message_id=91, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_CHANGE_VALVE_SETTING_CMD.value, ack = YES, msg = "~DG_Chg_Valves_Cmd") + + #0x5100 + hd_simulator.cmd_send_hd_general_response(message_id=81, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_COMMAND_RESPONSE.value, ack = YES, msg = "~DG_Cmd_Rsp") + + #0x7800 + hd_simulator.cmd_send_hd_general_response(message_id=120, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_START_STOP_CHEM_DISINFECT.value, ack = YES, msg = "~DG_Chem_Disinfect_Cmd") + + #0x7900 + hd_simulator.cmd_send_hd_general_response(message_id=121, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_START_STOP_FLUSH.value, ack = YES, msg = "~DG_Flush_Cmd") + + #0xA900 + hd_simulator.cmd_send_hd_general_response(message_id=169, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_HD_REQUEST_DG_CONCENTRATE_MIXING_RATIOS.value, ack = YES, msg = "~DG_Mixing_Ratio_Fill_Prep_Request") + + #reading of 4 digit messages has to be dealt with in utility + # #0xFFF1 + # hd_simulator.cmd_send_hd_general_response(message_id=65521, accepted=0, reason=1) + # verify_log(msg_id = MsgIds.MSG_ID_HD_DEBUG_EVENT.value, ack = YES, msg = "None") + # + # + # #0xFFF2 + # dg_simulator.cmd_send_dg_general_response(message_id=65522, accepted=0, reason=1) + # verify_log(msg_id = MsgIds.MSG_ID_DG_DEBUG_EVENT.value, ack = YES, msg = "None") + + #Power + #0x0100 + hd_simulator.cmd_send_poweroff_button_pressed() + verify_log(msg_id = MsgIds.MSG_ID_OFF_BUTTON_PRESS.value, ack = YES, msg = "PowerOff") + + #0x0E00 + hd_simulator.cmd_send_broadcast_poweroff_imminent() + verify_log(msg_id = MsgIds.MSG_ID_POWER_OFF_WARNING.value, ack = YES, msg = "ShuttingDown") + + #Events + #0xA400 + hd_simulator.cmd_send_hd_general_response(message_id=164, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_HD_EVENT.value, ack = YES) + + #0xA500 + dg_simulator.cmd_send_dg_general_response(message_id=165, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_EVENT.value, ack = YES) + + #Power-On Self-Test [POST] + #0x8E00 + hd_simulator.cmd_send_hd_post(1, True, False) + verify_log(msg_id = MsgIds.MSG_ID_HD_POST_SINGLE_TEST_RESULT.value, ack = YES, msg = "POSTItem") + + #0x8F00 + hd_simulator.cmd_send_hd_post(2, False, True) + verify_log(msg_id = MsgIds.MSG_ID_HD_POST_FINAL_TEST_RESULT.value, ack = YES, msg = "POSTDone") + + #0x9000 + dg_simulator.cmd_send_dg_post(1, True, False) + verify_log(msg_id = MsgIds.MSG_ID_DG_POST_SINGLE_TEST_RESULT.value, ack = YES, msg = "POSTItem") + + #0x9100 + dg_simulator.cmd_send_dg_post(2, False, True) + verify_log(msg_id = MsgIds.MSG_ID_DG_POST_FINAL_TEST_RESULT.value, ack = YES, msg = "POSTDone") + + #0x9C00 + hd_simulator.cmd_send_hd_general_response(message_id=156, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_HD_DG_POST_RESULT_REQUEST.value, ack = YES) + + #Versions + #0x1D00 + hd_simulator.cmd_send_version_hd_data(1, 1, 0, 4, 5,1, 2, 3, 6) + verify_log(msg_id = MsgIds.MSG_ID_HD_VERSION.value, ack = YES, msg = "VersionRsp") + + #0x1E00 + dg_simulator.cmd_send_version_dg_data(1, 1, 0, 4, 5,1, 2, 3, 6) + verify_log(msg_id = MsgIds.MSG_ID_DG_VERSION.value, ack = YES, msg = "Version") + + #0x9900 + hd_simulator.cmd_send_serial_hd_data('AGHHG1234GHJ') + verify_log(msg_id = MsgIds.MSG_ID_HD_SERIAL_NUMBER.value, ack = YES) + + #0x8800 + dg_simulator.cmd_send_serial_dg_data('AGHHG1234GHJ') + verify_log(msg_id = MsgIds.MSG_ID_DG_SERIAL_NUMBER.value, ack = YES) + + #0x9E00 +# failing due to quick acknowledgement from ui resulting in 0x9f in the last ID. +# will be uncommented once acknowledgements are finalized from Diality +# hd_simulator.cmd_send_hd_request_ui_version() +# verify_log(msg_id = MsgIds.MSG_ID_HD_UI_VERSION_INFO_REQUEST.value, ack = YES, msg = "VersionReq") + + #Initiate (Create/Select) a Treatment ( and later validate the parameters ) + #ID:0x3900 + hd_simulator.cmd_initiate_treatment_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_INITIATE_TREATMENT_RESPONSE.value, ack = YES, msg= "Initiate treatment response") + + #Treatment Parameters Validation + #ID:0x3600 (API is not reflecting with rejection messages) + #hd_simulator.cmd_send_treatment_parameter_validation_response([0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34]) + hd_simulator.cmd_send_hd_general_response(message_id=54, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_HD_NEW_TREATMENT_PARAMS_RESPONSE.value, ack = YES, msg= "Validate New Create Treatment Response") + + #Pre-Treatment Water Sample (sub-mode) + #ID:0x5E00 + hd_simulator.cmd_send_pre_treatment_water_sample_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_SAMPLE_WATER_CMD_RESPONSE.value, ack = YES, msg = "Water Sample Response") + + #ID:0x6000 + dg_simulator.cmd_send_dg_pre_treatment_filter_flush_progress_data(120,60) + verify_log(msg_id = MsgIds.MSG_ID_DG_FILTER_FLUSH_PROGRESS.value, ack = YES, msg = "Filter Flush Progress") + + #Pre-Treatment No Cartridge Self-Test (sub-mode) + #ID:0x6100 + hd_simulator.cmd_send_pre_treatment_self_test_no_cartridge_progress_data(120,60) + verify_log(msg_id = MsgIds.MSG_ID_HD_NO_CART_SELF_TEST_PROGRESS.value, ack = YES, msg = "No Cartridge Self-Tests Progress") + + #Pre-Treatment Disposable Installation (sub-mode) + #ID:0xAD00(API is missing, also message id is not present in msgs.py file + hd_simulator.cmd_send_hd_general_response(message_id=173, accepted=0, reason=1) + #verify_log(msg_id = MsgIds. .value, ack = YES, msg = "Disposable Installation Response") + + #Pre-Treatment Dry Self-Test (sub-mode) + #ID:0x6300 + hd_simulator.cmd_send_pre_treatment_self_test_dry_progress_data(120,60) + verify_log(msg_id = MsgIds.MSG_ID_HD_DRY_SELF_TEST_PROGRESS.value, ack = YES, msg = "Dry Self-Tests Progress") + + #Pre-Treatment Prime (sub-mode) + #ID:0x3D00 + hd_simulator.cmd_send_pre_treatment_prime_start_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_START_PRIME_RESPONSE.value, ack = YES, msg = "Prime Start Response") + + #ID:0x4300 + hd_simulator.cmd_send_pre_treatment_disposables_prime_progress_data(120,60) + verify_log(msg_id = MsgIds.MSG_ID_HD_PRIMING_STATUS_DATA.value, ack = YES, msg = "Priming Progress") + + #Pre-Treatment Patient Connection Begin + #ID:0x6500 + hd_simulator.cmd_send_hd_general_response(message_id=101, accepted=1, reason=0) + verify_log(msg_id = MsgIds.MSG_ID_HD_PATIENT_CONNECTION_BEGIN_RESPONSE.value, ack = YES, msg = "Patient Connection Begin Response") + + #Pre-Treatment Ultrafiltration (Init) Volume Adjustment + #ID:0x5000 + hd_simulator.cmd_send_hd_general_response(message_id=80, accepted=1, reason=0) + verify_log(msg_id = MsgIds.MSG_ID_HD_SET_UF_VOLUME_PARAMETER_RESPONSE.value, ack = YES, msg = "Pre UF Volume Adjustment Response") + + #Pre-Treatment Patient Connection Confirm + #ID:0x6700 + hd_simulator.cmd_send_pre_treatment_patient_connection_confirm_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_PATIENT_CONNECTION_CONFIRM_RESPONSE.value, ack = YES, msg = "Patient Connection Confirm Response") + + #Start Treatment + #ID:0x7200 + hd_simulator.cmd_send_pre_treatment_continue_to_treament_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_START_TREATMENT_RESPONSE.value, ack = YES, msg = "Start treatment response") + + #Post-Treatment + #ID:0x7400 + hd_simulator.cmd_send_post_treatment_disposable_removal_confirm_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_DISPOSABLE_REMOVAL_CONFIRM_RESPONSE.value, ack = YES, msg = "Disposable Removal Confirm Response") + + #Treatment Log + #ID:0x7600 + hd_simulator.cmd_send_post_treatment_log_response(1,1,1,1,1,1,1,1,1,1,1,1.0,1,1,1,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0, + 1.0,1.0,1,1.0,1.0,1,1.0,1,1.0,1.0,1,0,1) + verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_LOG_DATA_RESPONSE.value, ack = YES, msg = "Treatment Log Data Response") + + #ID:0x9400 + hd_simulator.cmd_send_treatment_log_data(1,1,1.0,0.0,1.0) + verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_LOG_PERIODIC_DATA.value, ack = YES, msg = "Treatment Log Data 30 min Periodic") + + #ID:0x9500 + hd_simulator.cmd_send_treatment_log_alarm(1,0.0,1.0) + verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_LOG_ALARM_EVENT.value, ack = YES, msg = "Treatment Log Alarms Data") + + #ID:0x9600 + hd_simulator.cmd_send_treatment_log_event(1,1.0,0.0) + verify_log(msg_id = MsgIds.MSG_ID_HD_TREATMENT_LOG_EVENT.value, ack = YES, msg = "Treatment Log Events Data") + + #Post-Treatment - Disinfect + #ID:0x8000 + hd_simulator.cmd_send_hd_disinfect_response(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_DISINFECT_RESPONSE.value, ack = YES, msg = "Disinfect Request Response") + + #ID:0x8200 + hd_simulator.cmd_send_hd_disinfect_chemical_confirm(1,0) + verify_log(msg_id = MsgIds.MSG_ID_HD_CHEM_DISINFECT_CONFIRM_RESPONSE.value, ack = YES, msg = "Chemical Disinfect User Confirm Response") + + #ID:0x8300 + dg_simulator.cmd_send_dg_disinfect_progress_time_flush(120,60) + verify_log(msg_id = MsgIds.MSG_ID_DG_FLUSH_TIME_DATA.value, ack = YES, msg = "DG Flush Time [each sub state]") + + #ID:0x8400 + dg_simulator.cmd_send_dg_disinfect_progress_time_heat(120,60) + verify_log(msg_id = MsgIds.MSG_ID_DG_HEAT_DISINFECT_TIME_DATA.value, ack = YES, msg = "DG Heat Disinfect Time [each sub state]") + + #ID:0x8500 + dg_simulator.cmd_send_dg_disinfect_progress_time_checmical(120,60) + verify_log(msg_id = MsgIds.MSG_ID_DG_CHEM_DISINFECT_TIME_DATA.value, ack = YES, msg = "DG Chem Disinfect Time [each sub state]") + + + # #0x3F00 +# the ID isn't getting logged for 63 +# hd_simulator.cmd_send_hd_general_response(63, 1, 2) +# verify_log(msg_id = MsgIds.MSG_ID_ALARM_CONDITION_CLEARED.value, ack = YES) + +#DG Broadcast Data + + #0x1F00 + dg_simulator.cmd_set_dg_ro_pump_data(1, 2,5) + verify_log(msg_id = MsgIds.MSG_ID_RO_PUMP_DATA.value, ack = YES , msg = "DG RO Pump Data") + + #0x2000 + dg_simulator.cmd_set_dg_pressures_data(1, 1, 2, 2) + verify_log(msg_id = MsgIds.MSG_ID_DG_PRESSURES_DATA.value, ack = YES , msg = "DG Pressures Data") + + #0x2400 + dg_simulator.cmd_set_dg_drain_pump_data(10, 5) + verify_log(msg_id = MsgIds.MSG_ID_DRAIN_PUMP_DATA.value, ack = YES , msg = "DG Drain Pump Data") + + #0x2700 + dg_simulator.cmd_set_dg_operation_mode(1) + verify_log(msg_id = MsgIds.MSG_ID_DG_OP_MODE.value, ack = YES , msg = "DG Operation Mode Data") + + #0x2800 + dg_simulator.cmd_set_dg_reservoir_data( 1, 2, 3) + verify_log(msg_id = MsgIds.MSG_ID_DG_RESERVOIRS_DATA.value, ack = YES , msg = "DG Reservoir Data") + + #0x2A00 + dg_simulator.cmd_set_dg_valves_states(3) + verify_log(msg_id = MsgIds.MSG_ID_DG_VALVES_STATES.value, ack = YES , msg = "DG Valves States Data") + + #0x2C00 + dg_simulator.cmd_set_dg_heaters_data(1, 2, 3) + verify_log(msg_id = MsgIds.MSG_ID_DG_HEATERS_DATA.value, ack = YES , msg = "Heaters Data") + + #0x0C00 + dg_simulator.cmd_set_dg_load_cell_readings_data(1, 2, 4, 3) + verify_log(msg_id = MsgIds.MSG_ID_LOAD_CELL_READINGS.value, ack = YES , msg = "Load Cell Readings Data") + + #0x2D00 + dg_simulator.cmd_set_dg_temperatures_data(1,2, 3, 4, 5, 6,7, 8,9, 10, 11, 12) + verify_log(msg_id = MsgIds.MSG_ID_DG_TEMPERATURE_DATA.value, ack = YES , msg = "DG Temperatures Data") + + #0x3100 + dg_simulator.cmd_send_dg_conductivity_data(1,2,3,4,5) + verify_log(msg_id = MsgIds.MSG_ID_DG_CONDUCTIVITY_DATA.value, ack = YES , msg = "DG Conductivity Data") + + #0x3700 + dg_simulator.cmd_send_dg_general_response(message_id=55, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_HEAT_DISINFECT_DATA.value, ack = YES , msg = "DG Heat Disinfect Data") + + #0x4200 + dg_simulator.cmd_send_dg_general_response(message_id=66, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_CONCENTRATE_PUMP_DATA.value, ack = YES , msg = "DG Concentrate Pumps Data") + + #0x4400 + dg_simulator.cmd_send_dg_general_response(message_id=68, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_UV_REACTORS_DATA.value, ack = YES , msg = "DG UV reactors Data") + + #0x4500 + dg_simulator.cmd_send_dg_general_response(message_id=69, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_THERMISTORS_DATA.value, ack = YES , msg = "DG Thermistors Data") + + #0x4800 + dg_simulator.cmd_send_dg_general_response(message_id=72, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_FANS_DATA.value, ack = YES , msg = "DG Fans Data") + + #0x3400 + dg_simulator.cmd_send_accelerometer_dg_data(x=1, y=2, z=3, x_max=2, y_max=2, z_max=3, x_tilt=2, y_tilt=3, z_tilt=4) + verify_log(msg_id = MsgIds.MSG_ID_DG_ACCELEROMETER_DATA.value, ack = YES , msg = "DG Accelerometer Data") + + #0x6B00 + dg_simulator.cmd_send_dg_general_response(message_id=107, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_FLUID_LEAK_STATE.value, ack = YES , msg = "DG fluid leak data") + + #0x7A00 + dg_simulator.cmd_send_dg_general_response(message_id=122, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_FLUSH_DATA.value, ack = YES , msg = "DG flush data") + + #0x8600 + dg_simulator.cmd_send_dg_general_response(message_id=134, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_VOLTAGES_DATA.value, ack = YES , msg = "Monitored DG voltages") + + #0x8700 + dg_simulator.cmd_send_dg_general_response(message_id=135, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_CHEM_DISINFECT_DATA.value, ack = YES , msg = "DG Chemical Disinfect Data") + + #0xA100 + dg_simulator.cmd_send_dg_general_response(message_id=161, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_SWITCHES_DATA.value, ack = YES , msg = "DG switches data") + + #0xA700 + dg_simulator.cmd_send_dg_general_response(message_id=167, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_ALARM_INFO.value, ack = YES , msg = "DG alarm info") + + #0xAA00 + dg_simulator.cmd_send_dg_general_response(message_id=170, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_CONCENTRATE_MIXING_RATIOS_DATA.value, ack = YES , msg = "DG concentrate mixing ratios") + + #0xA600 + dg_simulator.cmd_send_dg_general_response(message_id=166, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_DIALYSATE_FLOW_METER_DATA.value, ack = YES , msg = "Dialysate Flow Rate") + + #0xAB00 + dg_simulator.cmd_send_dg_general_response(message_id=171, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_SCHEDULED_RUNS_DATA.value, ack = YES , msg = "DG scheduled runs data") + + #0xAC00 + dg_simulator.cmd_send_dg_general_response(message_id=172, accepted=0, reason=1) + verify_log(msg_id = MsgIds.MSG_ID_DG_SCHEDULED_RUNS_INFO.value, ack = YES , msg = "DG scheduled runs info") + +# #0xAE00 +# no msg_id in msg_ids.py +# dg_simulator.cmd_send_dg_general_response(message_id=174, accepted=0, reason=1) +# verify_log(msg_id = '174', ack = YES , msg = "DG Fill Mode Data") +# +# #0xAF00 +# no msg_id in msg_ids.py +# dg_simulator.cmd_send_dg_general_response(message_id=175, accepted=0, reason=1) +# verify_log(msg_id = '175', ack = YES , msg = "DG Idle Mode Bad Fill Sub-states") +# + #Alarm + + #0x0200 + hd_alarm.cmd_send_clear_alarms() + verify_log(msg_id = MsgIds.MSG_ID_ALARM_STATUS.value, ack = YES , msg = "Alarm Status (Composite)") + + #0x0300 + hd_alarm.cmd_set_alarm_triggered(3,4, 2, 3, 5, 1, 1, 3) + verify_log(msg_id = MsgIds.MSG_ID_ALARM_TRIGGERED.value, ack = YES , msg = "Alarm Triggered") + + #0x0400 + hd_alarm.cmd_set_alarm_cleared(4) + verify_log(msg_id = MsgIds.MSG_ID_ALARM_CLEARED.value, ack = YES , msg = "Alarm Cleared") + + #0x7C00 + hd_simulator.cmd_send_hd_general_response(124, 1, 2) + verify_log(msg_id = MsgIds.MSG_ID_HD_ALARM_AUDIO_VOLUME_SET_RESPONSE.value, ack = YES , msg = "Set Alarm Audio Volume Level Response") + + #0x3200 + hd_simulator.cmd_send_hd_general_response(50, 1, 2) + verify_log(msg_id = MsgIds.MSG_ID_USER_REQUEST_ALARM_SILENCE.value, ack = YES , msg = "Alarm Silence Request") + + #0x9800 + hd_alarm.cmd_send_active_list_response(1, 2, 3, 3, 3, 3, 2,3,4, 4,4 ,9) + verify_log(msg_id = MsgIds.MSG_ID_HD_ACTIVE_ALARMS_LIST_REQUEST_RESPONSE.value, ack = YES , msg = "Active Alarms List Response") + + + #UF Vol. + + #0x4100 + hd_simulator.cmd_set_treatment_adjust_ultrafiltration_accepted(1) + verify_log(msg_id = MsgIds.MSG_ID_USER_UF_PAUSE_RESUME_RESPONSE.value, ack = YES , msg = "UF Pause/Resume Response") + + #0x1300 + hd_simulator.cmd_send_hd_general_response(19, 1, 2) + verify_log(msg_id = MsgIds.MSG_ID_USER_UF_SETTINGS_CHANGE_RESPONSE.value, ack = YES , msg = "UF Vol. Change Response") + + #0x2E00 + hd_simulator.cmd_set_treatment_adjust_ultrafiltration_confirm_rejected(1) + verify_log(msg_id = MsgIds.MSG_ID_USER_UF_SETTINGS_CHANGE_CONFIRMATION_RESPONSE.value, ack = YES , msg = "UF Vol. Change Confirmation Response") + + #Saline + + #0x1400 + hd_simulator.cmd_set_saline_bolus_response( 0,1, 10) + verify_log(msg_id = MsgIds.MSG_ID_USER_SALINE_BOLUS_RESPONSE.value, ack = YES , msg = "Saline Bolus Response") + + #Heparin + + #0x4C00 + hd_simulator.cmd_set_heparin_pause_resume_response(1,2) + verify_log(msg_id = MsgIds.MSG_ID_HD_HEPARIN_PAUSE_RESUME_RESPONSE.value, ack = YES , msg = "Heparin Pause/Resume Response") + + #Duration + + #0x1B00 + hd_simulator.cmd_send_treatment_adjust_duration_response(0,1,5,1) + verify_log(msg_id = MsgIds.MSG_ID_USER_TREATMENT_TIME_CHANGE_RESPONSE.value, ack = YES , msg = "Treatment Duration change Response") + + #Blood / Dialysate + + #0x1800 + hd_simulator.cmd_send_treatment_adjust_blood_dialysate_response(1, 1, 12, 10) + verify_log(msg_id = MsgIds.MSG_ID_USER_BLOOD_DIAL_RATE_CHANGE_RESPONSE.value, ack = YES , msg = "Blood/dialysate rate change Response") + + #PRS-58: In-Line Blood Pressure Limits + + #0x4700 + hd_simulator.cmd_send_treatment_adjust_pressures_limit_response(1,1,1, 2, 3, 4) + verify_log(msg_id = MsgIds.MSG_ID_HD_PRESSURE_LIMITS_CHANGE_RESPONSE.value, ack = YES , msg = "A/V BP Limit Change Response")