sources

Clone Tools
  • last updated a few minutes ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-16637, DEN-16640, DEN-16641 : P1_Staging Dry-Run found issues.

DEN-16637: SW: Top Alarm on Debug Screen Does Not Change When Alarm is Cleared

DEN-16640: SW: Blood Measurement Interval Set to OFF During Treatment When Set to 5 min in Pre-treatment

DEN-16641: UI: Heparin Syringe Installation Screen Missing

    • -1
    • +1
    ./gui/qml/dialogs/DiagnosticsDialog.qml
DENBUG-204 aligned the commented out code in the diagnostics qml

    • -3
    • +3
    ./gui/qml/dialogs/DiagnosticsDialog.qml
DENBUG-204 updated the diagnostics screens qml with the latest dialysate outlet pump broadcast changes

    • -0
    • +8
    ./gui/qml/dialogs/DiagnosticsDialog.qml
DENBUG-204 updated the message payload of message 0x0B00 by adding an integer at the end of the structure

  1. … 1 more file in changeset.
DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- the order of the QML PROPERTYs cannot exactly predicted therefore setting them if not needed has to be avoided.

- set the alarmID to 0 to trigger the next change since we skip the property updated if the alarmID is 0.

    • -22
    • +27
    ./view/hd/alarm/VAlarmStatus.cpp
DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

    • -1
    • +6
    ./gui/qml/components/GridSelection.qml
DENBUG-179, DENBUG-79: Export dialog files count issues.

DENBUG-179: Export Logs text does not update after Factory Reset

DENBUG-79: UI: SD-Card file count increments when scrolling up and down the log file window

OPEN

    • -11
    • +7
    ./gui/qml/pages/settings/SettingsExportLogs.qml
DENBUG-136: Main treatment screen fails to prompt user with vital measurements entry after set interval

- the issue cannot be reproduced.

- added a count down timer for the vital entry to better understand how and when the timer works on each interval.

    • -0
    • +14
    ./gui/qml/pages/treatment/TreatmentHome.qml
DEN-16551: FDA: Wi-Fi security protocol TKIP encryption shall be removed.

CS-3: CS: Heparin OFF o the HCP portal Treatment report

- Fixed some issues in the create treatment screen on heparin type

- Combined the separated values for log and GUI into one values for both.

- Added the functionality for the TreatmentConfirm (Pre-Tx), TreatmentReview (Ppost-Tx), TreatmentReport (log) for the heparin values.

    • -4
    • +6
    ./gui/qml/components/GridSelection.qml
CS-5: @ UI: TxCode generation on device

~ Added QRCode for the TxCode

- Added a Third-Party Open-Source MIT Licence QRCode generator from the following link:

* Copyright (c) Project Nayuki. (MIT License)

* https://www.nayuki.io/page/qr-code-generator-library

- Created a QRCode component

- Added the QRCode generation functionality in the GuiView

- Added QRCode for both the Pre-Tx-Confirmation (UI Generated) and Post-Tx-Review (CS received)

- Moved the CS TxCode Receive wait "..." from C++ to QML to keep the TxCode empty while wait to avoid displaying the "..." as a QRCode.

- Animated the CS TxCode Receive wait "..."

~ Added development testability for the CloudSync communication

~ Fixed the date change buf file watch to wait for the CS to get the checkin and create the out buf file.

    • -3
    • +14
    ./cloudsync/CloudSyncController.cpp
    • -0
    • +61
    ./gui/qml/components/QRCode.qml
    • -0
    • +830
    ./utility/qrcodegen.cpp
    • -0
    • +578
    ./utility/qrcodegen.h
  1. … 3 more files in changeset.
Addressing code review comments

Addressing Code Review comments

    • -11
    • +10
    ./gui/qml/components/TouchRect.qml
DENBUG-182 , DENBUG-185

DENBUG-185: UI shows version without period in between (ECO-11648, ECO-11616)

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

  1. … 1 more file in changeset.
DEN-16531: UI: The reservoir message structure has changed on FW and UI needs to adjust.

    • -12
    • +0
    ./model/dg/data/MDGReservoirData.cpp
DEN-16532 UI: Remove any comma from the texts being added in the Treatment Report

DEN-16530 UI: The Generated Tx Code seems cut off.

- added second to be more unique.

DEN-16530 UI: The Generated Tx Code seems cut off.

DEN-16527 UI: Retrieval of generated TxCode stored in the pending reports is invalid.

DEN-16502: UI: CS: CloudSync out buff is created by UI which causes permission issue for CloudSync

- figured a way to delay the CS during normal bootup and reverted back the TODOs for the CS POST results.

    • -11
    • +7
    ./cloudsync/CloudSyncController.cpp
DEN-16502: UI: CS: CloudSync out buff is created by UI which causes permission issue for CloudSync

- Reverted back the version macros to use the bamboo env variables, to be consistent with other stacks

- Changed the DeviceController addWatch method to avoid creating file if does not exist, to prevent the permission denied issue when CS writes to the file, since if the file is created by denali, cloud does not have write access any more.

- Changed the execution order of the Application to be executed before CloudSync since in the new CS 0.4.6 it will error out and stop running because UI has not been executed to prepare the encrypted folder.

- Added a Check-In for the UI and CS to check if the CS is running and the above change will delay the post to be sent later when the check-in response is received.

- Added a TIME_CALL to call the method after each x times of call (is used in TimerEvent)

    • -15
    • +70
    ./cloudsync/CloudSyncController.cpp
  1. … 1 more file in changeset.
CS-5: UI: TxCode generation on device

- Fixed a typo on the "Tx Code" key

CS-5: UI: TxCode generation on device

    • -1
    • +1
    ./model/hd/data/MHDUsageInfoResponse.h
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

    • -20
    • +14
    ./model/hd/alarm/MAlarmMapping.cpp
Bamboo Commit: Updated MAlarmMapping.cpp

    • -14
    • +20
    ./model/hd/alarm/MAlarmMapping.cpp