Activity application/sources/gui/qml

- a new method _init has been added to the PROPERTY_BASE to reset the property value without triggering the changed method so the property will get updated on the next round if the same value as before has been sent. ( the issue could be if code return after the alarmID = 0 on next alarm if the same ID send since the value is the same the QML will not get any signal to update, by changing the private property the signal will be triggered.)

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- the order of the QML PROPERTYs cannot exactly predicted therefore setting them if not needed has to be avoided.

- set the alarmID to 0 to trigger the next change since we skip the property updated if the alarmID is 0.

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- -6
- +20
./components/TouchRect.qml
- History
- Source
- Diff
./components/TouchRect.qml
… 3 more files in changeset.

6:09 am

Behrouz NematiPour

More
UI-DEN-16597-28
Closed

6:08 am

Behrouz NematiPour

http://devapps.diality.us:8060/cru/UI-DEN-16597-29 RESOLVED

http://devapps.diality.us:8060/cru/UI-DEN-16597-29
RESOLVED

6:08 am

Behrouz NematiPour

More
Re: UI-DEN-16597-28
commented on review

another CR has been created due to some commit issues on the review branch.

6:07 am

Behrouz NematiPour

More
UI-DEN-16597-29
started review

UI Bugfix/DEN-16597: UI-BN-S114

5:51 am

Behrouz NematiPour

More
5af51ca
changed 3 files
master, @Environement_Swith and 63 more UI-DEN-16597-28 UI-DEN-16597-29

DENBUG-182: Phantom Alarm Screen Appears After Clearing Last Alarm

- the order of the QML PROPERTYs cannot exactly predicted therefore setting them if not needed has to be avoided.

- set the alarmID to 0 to trigger the next change since we skip the property updated if the alarmID is 0.

- -5
- +0
./AlarmItem.qml
- History
- Source
- Diff
./AlarmItem.qml
… 2 more files in changeset.

3:59 am

Behrouz NematiPour

More
44c45c6
changed 20 files
model_unit_test_fix, release/p1 and 11 more UI-UCOMMITS-16

DENBUG-75: UI: Treatment log data via USB does not match with data displayed on the Treatment Review Screen

CS-5: @ UI: TxCode generation on device

~ Added QRCode for the TxCode

- Added a Third-Party Open-Source MIT Licence QRCode generator from the following link:

* Copyright (c) Project Nayuki. (MIT License)

* https://www.nayuki.io/page/qr-code-generator-library

- Created a QRCode component

- Added the QRCode generation functionality in the GuiView

- Added QRCode for both the Pre-Tx-Confirmation (UI Generated) and Post-Tx-Review (CS received)

- Moved the CS TxCode Receive wait "..." from C++ to QML to keep the TxCode empty while wait to avoid displaying the "..." as a QRCode.

- Animated the CS TxCode Receive wait "..."

~ Added development testability for the CloudSync communication

~ Fixed the date change buf file watch to wait for the CS to get the checkin and create the out buf file.

CS-3: CS: Heparin OFF o the HCP portal Treatment report

- Fixed some issues in the create treatment screen on heparin type

- Combined the separated values for log and GUI into one values for both.

- Added the functionality for the TreatmentConfirm (Pre-Tx), TreatmentReview (Ppost-Tx), TreatmentReport (log) for the heparin values.

DENBUG-75: UI: Treatment log data via USB does not match with data displayed on the Treatment Review Screen

- removed the qtcode component from the two screen of the treatment confirm, review for P1 release.

- -4
- +6
./components/GridSelection.qml
- History
- Source
- Diff
./components/GridSelection.qml
- -0
- +61
./components/QRCode.qml
- History
- Source
./components/QRCode.qml
- -1
- +23
./pages/posttreatment/PostTreatmentReview.qml
- History
- Source
- Diff
./pages/.../PostTreatmentReview.qml
- -0
- +9
./pages/pretreatment/create/PreTreatmentConfirm.qml
- History
- Source
- Diff
./pages/.../PreTreatmentConfirm.qml
- -3
- +2
./pages/pretreatment/create/PreTreatmentCreate.qml
- History
- Source
- Diff
./pages/.../PreTreatmentCreate.qml
- -5
- +5
./pages/pretreatment/create/PreTreatmentCreateStack.qml
- History
- Source
- Diff
./pages/.../PreTreatmentCreateStack.qml
- -1
- +1
./pages/treatment/TreatmentHome.qml
- History
- Source
- Diff
./pages/treatment/TreatmentHome.qml
… 13 more files in changeset.

12:57 am

Behrouz NematiPour

More
UI-DEN-16597-28
added msuleiman (deleted user)

3:20 pm

Behrouz NematiPour

More
b34af34
changed 5 files
model_unit_test_fix, release/p1 and 11 more UI-UCOMMITS-16

DENBUG-207: UI: UI does not reset to default parameters upon new patient

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

- -1
- +6
./components/GridSelection.qml
- History
- Source
- Diff
./components/GridSelection.qml
- -0
- +11
./components/SliderCreateTreatment.qml
- History
- Source
- Diff
./components/SliderCreateTreatment.qml
- -1
- +2
./pages/MainStack.qml
- History
- Source
- Diff
./pages/MainStack.qml
- -1
- +56
./pages/pretreatment/create/PreTreatmentCreate.qml
- History
- Source
- Diff
./pages/.../PreTreatmentCreate.qml
- -0
- +8
./pages/pretreatment/create/PreTreatmentCreateStack.qml
- History
- Source
- Diff
./pages/.../PreTreatmentCreateStack.qml

3:20 pm

Behrouz NematiPour

More
9b99693
changed 5 files
master, @Environement_Swith and 63 more UI-DEN-16597-28 UI-DEN-16597-29

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.