MAlarmMapping.cpp

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-13743: IMP: Mostly worked on Alarm Dialog/Bar

- Changed the Alarm Dialog (Title decreased by 4, Description increased by 4) / Bar (increased by 6) font size,

- Adjusted the AlarmDialog Timer position and layout.

- Removed the mouseArea from the WaitDone component.

- Added titel/description fontPixedSize for the NotificationDialog and NotificationBar

- Clear the reasontext on home screen when is not visible anymore.

- Clear the reasontext on SettingsDG when is not visible anymore.

- Used NotificationBarSmall instead of NotificationBar in:

- ModalDialog

- MainHome

- TreatmentAdjustmentBase

- TreatmentFlowBase

  1. … 15 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

DEN-13736: Disinfection demo

- Some changes has been made to UI to able to navigate to the home while on disinfection.

- CloudSync disabled by default.

  1. … 6 more files in changeset.
Updated Alarm mapping

  1. … 2 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

DEN-13743: IMP: Device Registration - CloudSync POST test - Device Serial/Version req/rsp

- Added the disable functionality ( main.h SINGLETON_... macros ) for the Singleton classes, which are basically controllers, to stop their thread event loop, so they literally stop working.

- Connected the disable functionality of the controllers like, CloudSync, Bluetooth (Maybe later Logger), to the POST result.

- Improved the ./run.sh script and same on the ApplicationPOST class.

- Set the minimum of the HD/DG serial length to 1 byte, since it is not exactly at 15 or 20 char length.

- Removed the "CS" from the UI log of sending out the messages to CS, which the source is UI, not the CS and this is confusing.

- Removed the "Settings/DG Cleaning" scheduling section.

- Changed the POST version/serial request from UI to all to be identified in the log from "Versionreq" to "POSTInfReq".

- Added a new UI POST Alarm in AlarmDefs.h, ALARM_ID_UI_POST_FAILURE_CLOUDSYNC = 295, ///< UI POST CloudSync failure

- Fixed a potential bug on SD-Card not ready service logging.

  1. … 16 more files in changeset.
DEN-13645: IMP: DEN9297: Disinfection implementation [ Disinfection Messages ] [0x9A]

- The UI application was refusing to send the message 0x9A, and the type of the message to be sent should change to U32 to work since FW is using U32 for bool.

  1. … 2 more files in changeset.
Latest Unit testing modules

  1. … 4 more files in changeset.
DEN-13645: IMP: Updated the Blood Prime message [0x5900]

- It has 3 parameters (UI expected) but recently changed on the FW and sending only 2 which then UI rejects it. now updated to have only 3.

  1. … 5 more files in changeset.
DEN-13645: IMP: Unhandled messages duplicate keys fix

- it has been observed that the unhandled messages are not logged correctly and turned out it is because of the Types of each parameter used as keys and keys can't be duplicate by default which caused issue for the unhandled messages, since they may have 6 parameter and all with F32 type which then becomes one parameter of type F32.

- an attribute has been defined for the config file with the format:

#--duplicate_key_on

#--duplicate_key_off

to allow or disallow the duplicate key at any point in the config file.

- Note that the save config parameters are always unique key like AlarmVolume which doesn't make sense to have duplicate entry.

  1. … 9 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

DEN-13645: IMP: DEN-9297: Disinfection messaging flow review

- Disinfection current code/design review

- Disinfection Screens and Navigation implementation

- There are functions and properties used but not implemented yet in vDisinfectAdjustDisinfect, and some that are implemented are not implemented with the new design.

  1. … 7 more files in changeset.
DEN-13645: IMP: General Implementation [-k, -K]

- The logic for the check-in and Ack messages reversed to be always disabled and can be enabled later if needed.

- For Integration/Unit tests the application needs to be called with these two switches otherwise tests will fail.

  1. … 5 more files in changeset.
DEN-13645 IMP: DEN-12958: UI shall generate the POST fail alarm if the SD-Card not present and stop logging

__________

- Log Export

- Added the Alarm generation on the GuiController if SD-Card is not ready, or is/becomes read-only.

- AlarmGenerator

- Added the SD-Card failure alarm - ALARM_ID_UI_POST_FAILURE_SDCARD

- Added alarm clear - ALARM_ID_NO_ALARM

- Added a flag to stop logging if the SD-Card is not ready or is readonly.

- Removed pause on log clean up.

- Improved the DeviceController SD-Card, USB status detection.

- Fixed and improved the MVC connection betweein device/Application/Gui controllers.

- A CLI switch ( -S ) added to disable the feature that is disabling the log if the SD-Card doesn't exist. So if the -S switch is used while calling the denali application, the logging will NOT be disabled, if SD-Card fails.

- In the ExportButton and USBButton(eject) removed the enable logic and has to be done outside of the component. It has been done for the Settings/export and Post-Tx/Review.

- Added title and file count for each SD-Card and USB-Drive panels.

__________

- Run.sh

- Added a check for the CloudSync and if the folder doesn't exist it won't do the rest

- Kill the denali application, in case it is still running.

- Added SD-Card type as part of its detection and if it is not ext4 format it fails the test.

- Optimized the mount point detection.

__________

- NoCANBus

- added the NoCANBus to the fault and init modes to not to navigate to those if NoCANBus is true. Otherwise it conflict with navigate to the home.

- Added a log in case the NoCANBus is enabled.

__________

- Settings

- Converted the '\n' in the settings values to actual newline character.

__________

- Thread:

- Moved the QuiController in its own thread, _Gui_Thread.

__________

- Alarms

- Added an emit to update the Alarm Dialog with the latest title/message, received from Alarms.conf In case there was an alarm before even Alarm.conf is read.

  1. … 27 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

- Finalizing the log export.

  1. … 4 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

- Update the eject and export button status for the export service and treatment

  1. … 3 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

  1. … 11 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-13035: Update alarm body messages

- Removed the exclamation mark icon form the Alarm Dialog.

- Removed the exclamation mark icon form the Alarm Bar.

- Made the whole AlarmDialog title bar doubleClick and diagnostics opener if the alarm is not minimizable.

- Moved the Alarm ID from title to the bottom left of the dialog with format: "ID:<id>".

- Clipped the AlarmDialon body message area, crop the text if longer than dialog area.

- Changed the "settings" property name of the VSettings to "instructions".

- Changed the date/time formats keys to simplify the code and conf file.

- Implemented the Alarm Body messages, to load from Alams/Alarms.conf, instead of the FW.

- The FW texts/documents will still being used if the Alarms.conf doesn't have a definition.

- A instruction base capability has also been added to the MVC, but UI still not supporting it.

  1. … 18 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

Fixed the issue on the PatientID confirm text

  1. … 1 more file in changeset.
DEN-13489: IMP: General Implementation for any bugs and any other implementations

- Enable Dialin logging CL switch has changed to disable dialin logging, to make the dialin logging as enabled by default and removed -d from run.sh. [Sean's Request]

- Added log unhandled as error to the unhandled reader as well.

- Implemented the NoCANBus to be used when no CANBus enabled. For now it is only bypassing the create treatment button command and helps to get to the treatment parameters for the touchscreen test. [EEMN's Support]

- Fixed a bug on the Volume Adjustment on post, sending to HD to update HD alarm volume with previous, adjusted value, which was sending a request one again receiving HD response, and it was a potential crash loop.

- Added disable acknowledgment logs (req,bak) CL switch, -K : --disable-acknow-log [Sean's Request]

  1. … 14 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

DEN-11539: Service password initial setup

  1. … 12 more files in changeset.
Bamboo Commit: Updated MAlarmMapping.cpp

Bamboo Commit: Updated MAlarmMapping.cpp

DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

- The save ability has been added to the Settings.

- Note: the design of the settings need to change: 1- singleton class should be the controller not the mode, 2 - The column based keyvalue has to change to tree(map).

  1. … 12 more files in changeset.