Controllers

Clone Tools
  • last updated a few minutes ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
the second level 'if' statement indentation is appeared to be missing for readability.

the second level 'if' statement indentation is appeared to be missing for readability.

HD-DEN-15953_Dialysate Temp Alarm Triggered After Dialysate Recirculation Stopped
HD-DEN-15953_Dialysate Temp Alarm Triggered After Dialysate Recirculation Stopped
HD-DEN-16563_Venous Pressure Readings Were Below 20Mmhg For 1.5 Minutes Before Low Venous
HD-DEN-16563_Venous Pressure Readings Were Below 20Mmhg For 1.5 Minutes Before Low Venous
HD-DEN-16518_Alarm 41 Triggered ON Dvt 014 AT The Beginning OF Treatment
HD-DEN-16518_Alarm 41 Triggered ON Dvt 014 AT The Beginning OF Treatment
RESOLVED IN CODE WALKTHROUGH.

RESOLVED IN CODE WALKTHROUGH.

Updated code changes. Open loop still maintains the minimum PWM duty cycle as 10%.

Updated code changes. Open loop still maintains the minimum PWM duty cycle as 10%.

Updated code changes. Open loop still maintains the minimum PWM duty cycle as 10%.

Updated code changes. Open loop still maintains the minimum PWM duty cycle as 10%.

Do we want to have the 11% minimum here? I thought it was just for closed loop control.

Do we want to have the 11% minimum here? I thought it was just for closed loop control.

This will cause open loop control mode to have a minimum of 11% instead of 10%. For open loop, pwmDC is assigned a value at line 295. Do we still need the #define for the 10% pwm lower limit?

This will cause open loop control mode to have a minimum of 11% instead of 10%. For open loop, pwmDC is assigned a value at line 295. Do we still need the #define for the 10% pwm lower limit?

RESOLVED in CODE WALKTHROUGH

RESOLVED in CODE WALKTHROUGH

HD-DEN-16518_Alarm 41 Triggered ON Dvt 014 AT The Beginning OF Treatment
HD-DEN-16518_Alarm 41 Triggered ON Dvt 014 AT The Beginning OF Treatment
Discussed with Sean and confirmed that matching requirement done in the code. We are good with the modification now.

Discussed with Sean and confirmed that matching requirement done in the code. We are good with the modification now.

Why was the = removed from the ternary ifs?

Why was the = removed from the ternary ifs?

HD-DEN-16391_FW Dialysate Temperature Alarm Not Sensitive Enough Use Tdi Moving Avg
HD-DEN-16391_FW Dialysate Temperature Alarm Not Sensitive Enough Use Tdi Moving Avg
HD-DEN-16512_Dpo Stops During Treatment After Reconfirming Dialysate Flow Rate
HD-DEN-16512_Dpo Stops During Treatment After Reconfirming Dialysate Flow Rate