SettingsHome.qml

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
LEAH-1958-UI-screen-resizing:

To support Leahi-Screen 1920x1080

Adjusted the Font and modules like slider etc ...

Reduce the keyboard buttons size

  1. … 26 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 28 more files in changeset.
DENBUG-163: High Venous Pressure Alarm 130 Triggers During Normal Treatment Operation

Added air trap raw lower level and air trap raw upper level to be logged and displayed on the diagnostics screen

DEN-16693: Institutional Settings Implementation

Initial commit of the inititutional record MVC implementation.

DEN-16693: Institutional Settings Implementation

Updated the qml file to display the insititutional record. Updated the model and view classes.

Bamboo Commit: Updated MAlarmMapping.cpp

DENBUG-199: Alarm 280 (DG Fault: DRP Direction Fault) Triggered during Pre-Treatment Sequence

Added the Maxon RPM to the handled messages to be logged.

DEN-16693: Institutional Settings Implementation

Updated the institutional record screen columns.

DEN-16693: Institutional Settings Implementation

Updated the units width in the institutional record.

DEN-16693: Institutional Settings Implementation

Changed the prescribed UF volume to L from mL.

DEN-16693: Institutional Settings Implementation

Updated the title of the Institutional Configurations and updated the heparin units

DEN-16693: Institutional Settings Implementation

Changed the name of the Institutional Configurations to Institutional Configs to be able to fit in the tab

DEN-16693: Institutional Settings Implementation

- Touch grid column spacing shrank from 100 to 50.

- Settings column width expanded from 300 to 325.

- Changed the Institutional Configs to Institutional Configurations on settings items.

DEN-16693: Institutional Settings Implementation

- Addressed the code review comments

  1. … 34 more files in changeset.
DEN-16693: Institutional Settings Implementation

- Touch grid column spacing shrank from 100 to 50.

- Settings column width expanded from 300 to 325.

- Changed the Institutional Configs to Institutional Configurations on settings items.

  1. … 2 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 612 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 612 more files in changeset.
DEN-15211 : CS: CloudSync Configuration Should Preserve after setup

- Made the code testable for CloudSync Device Registration.

  1. … 1 more file in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 54 more files in changeset.
DEN-15316: Usability: UI: Remove Extra Button for Disinfection

- separated the screens for the DG Cleaning and DG scheduling

  1. … 6 more files in changeset.
DEN-15296 : Implemented the screen base and navigation of the denali -E

  1. … 23 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 608 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 100 more files in changeset.
DEN-13134: IMP: General Implementation for any bugs and any other implementations

DEN-12836: Treatment Report/log export modifications

- Improved the SDItem and renamed to SDCProgressItem.

- Added another separate progress circle component for the USB Driver [USBProgressItem]

- Adding Space check for USB as well to get the USBProgressCircle update.

- Optimized ExportButton and added two size for Settings screen(normal) and Treatment Review screen(small)

- Improved USB button comonent

- Added a global byte size converter in Variable.qml

- Improved MainMenu component

- Added a notification for the TreatmentFlowBase.qml main component.

- Used the notification of the TreatmentFlowBase.qml for the Treatment Review Screen Log export to display feedback to the user.

- Added an individual screen for the log export.

- Removed the Export Log and USB eject from the main settings option screen.

- Added an option for the Export log on the settings home screen which is currently enabled for non-service users too.

- Fixed the DGVersionResponse, log message.

- Put a comment in the FileHandler.cpp about the Qt API QStorageInfo::mountedVolume() which seems so slow on detecting mounted volumes when a USB derive is just plugged in (It could be system issue, since it has also been observed from shell console.)

- Added error handling to the Treatment Log/Report export

DEN-12726: Denali application crashing

- Modified the Logger Maxusage limit to keep 50% of the data/event log and 15% of the service log and keep 35% free, after the log clean up triggered by 15% free storage detected.

DEN-13051: Encounter alarm 6 and SD card detection problem after updating UI version

DEN-13156: Settings screen menu should disappear on service mode

- Improved the MainStack.qml navigation rules.

- Improved the Patient ID keyboard handling, to hide the keyboard, when not on the screen.

- Improved the SettingsStack.qml navigation rules.

DEN-13128: KBM: Cloud Sync Integration

- Saving the CS log in UTC timezone.

DEN-13127: LTS: Development Support

- Fixed the issue found on the End-Treatment screen Confirm button which didn't respect the last instruction page enable only rule.

  1. … 44 more files in changeset.
wrapping up multiple sprint codes

- LOG: Added a CLI option to disable the Check-In logs by adding -k, --disable-check-in-log at the CLI. This was interrupting the log tests. The build macro has been removed.

- POST: During the coverage find out that the getter functions have not even been called in the ApplicationPost.

- CloudSync: Added the Treatment Code(TxCode), received from the cloud after the Treatment Report stored by Cloud System. It is a message communication between UI<=(2008)=CS.

- CloudSync: Two error added for the 2008: TxCode

- CloudSync: Due to some issues on Cloud System regarding the credential expiration, It has been asked to add a temporary workaround to send the credentials (1004) before message 1006:Device State, 1007:Treatment Report.

- DEN-12727: Treatment Parameter Screen: Added more space between the parameters components specially the Temperature slider and the option on top.

- DEN-12829: Enabled the back button on the Start Treatment Screen

- DEN-12761: Enabled an empty Patient ID.

It has not yet been implemented on the CloudSync App, so if sent empty CloudSystem will later reject to store the TxReport.

When later implemented an unassigned random Patient ID will be created for that TxReport to be later defined and assigned.

- DEN-12837, DEN-12840: The Disinfection Scheduling Entry and the Confirm button have been removed from the "Dialysate Generator Settings" screen.

- DEN-12837, DEN-12840: The "Dialysate Generator Settings" changed to "DG Cleaning" for the menu option and the screen title.

- Settings: The Clear Alarm Condition button has been removed from the settings screen for the release.

- Settings: The options which has no implementation for the phase 1 have been removed from the Settings screen Service mode options. [Language, Calibration, SW Update, Factory Reset]

- DEN-12841: Reworded the password entries in Service screen and for WiFi Join Screen.

- TxCode, TxReport: removed the commented out Treatment Report Parameters from the code.

- LOG: added one character space int he DEBUG log for the Not Enough Data in Types.

- Settings: The Service Dates default values changed from 0 to "" since they are strings.

- Settings: Added some clarification for the Home screen greetings

  1. … 32 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 584 more files in changeset.
DEN-8494: Implementation: Merge the Service Login & About into the code.

- Added Service login

- Added having the comment capability in settings .conf files.

- Performance improvement in settings reader.

  1. … 13 more files in changeset.
DEN-8317: Implementation: Merge the Wi-Fi into the code.

  1. … 15 more files in changeset.
DEN-7946 Saline, Standby, Alarm, Keyboard, ....

  1. … 21 more files in changeset.
DEN-7833: Implementations [Merge the Wi-Fi, Date/Time into the code]

- Added some feature

- Removed some debug codes.

- Fix some issues.

  1. … 9 more files in changeset.
DEN-7833: Implementations [Merge the Wi-Fi, Date/Time into the code]

- Prepared the fundamentals of the Settings and Keyboard

- Added DateTime MVC and tested with the simulator.

- So many other debugging and improvement

  1. … 84 more files in changeset.