storage

Clone Tools
  • last updated a few minutes ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-13489: IMP: General Implementation for any bugs and any other implementations

- Enable Dialin logging CL switch has changed to disable dialin logging, to make the dialin logging as enabled by default and removed -d from run.sh. [Sean's Request]

- Added log unhandled as error to the unhandled reader as well.

- Implemented the NoCANBus to be used when no CANBus enabled. For now it is only bypassing the create treatment button command and helps to get to the treatment parameters for the touchscreen test. [EEMN's Support]

- Fixed a bug on the Volume Adjustment on post, sending to HD to update HD alarm volume with previous, adjusted value, which was sending a request one again receiving HD response, and it was a potential crash loop.

- Added disable acknowledgment logs (req,bak) CL switch, -K : --disable-acknow-log [Sean's Request]

  1. … 13 more files in changeset.
DEN-13489 IMP: General Implementation

DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

DEN-11539: Service password initial setup

  1. … 11 more files in changeset.
DEN-12838: UI shall store the latest alarm volume and resend that to HD on POST

- The save ability has been added to the Settings.

- Note: the design of the settings need to change: 1- singleton class should be the controller not the mode, 2 - The column based keyvalue has to change to tree(map).

  1. … 9 more files in changeset.
DEN-12836: Treatment Report/log export modifications

- A little cleanup and refactoring and added the treatment log 10% rotation.

  1. … 1 more file in changeset.
DEN-13134: IMP: General Implementation for any bugs and any other implementations

DEN-12836: Treatment Report/log export modifications

- Improved the SDItem and renamed to SDCProgressItem.

- Added another separate progress circle component for the USB Driver [USBProgressItem]

- Adding Space check for USB as well to get the USBProgressCircle update.

- Optimized ExportButton and added two size for Settings screen(normal) and Treatment Review screen(small)

- Improved USB button comonent

- Added a global byte size converter in Variable.qml

- Improved MainMenu component

- Added a notification for the TreatmentFlowBase.qml main component.

- Used the notification of the TreatmentFlowBase.qml for the Treatment Review Screen Log export to display feedback to the user.

- Added an individual screen for the log export.

- Removed the Export Log and USB eject from the main settings option screen.

- Added an option for the Export log on the settings home screen which is currently enabled for non-service users too.

- Fixed the DGVersionResponse, log message.

- Put a comment in the FileHandler.cpp about the Qt API QStorageInfo::mountedVolume() which seems so slow on detecting mounted volumes when a USB derive is just plugged in (It could be system issue, since it has also been observed from shell console.)

- Added error handling to the Treatment Log/Report export

DEN-12726: Denali application crashing

- Modified the Logger Maxusage limit to keep 50% of the data/event log and 15% of the service log and keep 35% free, after the log clean up triggered by 15% free storage detected.

DEN-13051: Encounter alarm 6 and SD card detection problem after updating UI version

DEN-13156: Settings screen menu should disappear on service mode

- Improved the MainStack.qml navigation rules.

- Improved the Patient ID keyboard handling, to hide the keyboard, when not on the screen.

- Improved the SettingsStack.qml navigation rules.

DEN-13128: KBM: Cloud Sync Integration

- Saving the CS log in UTC timezone.

DEN-13127: LTS: Development Support

- Fixed the issue found on the End-Treatment screen Confirm button which didn't respect the last instruction page enable only rule.

  1. … 39 more files in changeset.
DEN-12836: Treatment Report/log export modifications

- DEN-12944: KBM: Usual Meetings/Support/Development

- Modified the setup.sh script to work on PDT (Pacific timezone)

- Added timezone display on the screen by adding it to the VDateTime

- Removed unnecessary FileHandler header include.

- Modified the Treatment Review Export button to export the current TxReport only.

- Added the Safe Eject button for the Post-Treatment TxReport Export.

- Moved Log Folder definitions to the StorageGlobal.

- Fixed the greeting issue [https://github.com/Diality/testsuites/issues/57]

- DEN-11826: Bluetooth BloodPressure Cuff Interval - Observation

- It has completely redesigned

- DEN-9706: Blood Pressure measurement entry window closes automatically

- Auto Hide is disabled

  1. … 22 more files in changeset.
wrapping up multiple sprint codes

- LOG: Added a CLI option to disable the Check-In logs by adding -k, --disable-check-in-log at the CLI. This was interrupting the log tests. The build macro has been removed.

- POST: During the coverage find out that the getter functions have not even been called in the ApplicationPost.

- CloudSync: Added the Treatment Code(TxCode), received from the cloud after the Treatment Report stored by Cloud System. It is a message communication between UI<=(2008)=CS.

- CloudSync: Two error added for the 2008: TxCode

- CloudSync: Due to some issues on Cloud System regarding the credential expiration, It has been asked to add a temporary workaround to send the credentials (1004) before message 1006:Device State, 1007:Treatment Report.

- DEN-12727: Treatment Parameter Screen: Added more space between the parameters components specially the Temperature slider and the option on top.

- DEN-12829: Enabled the back button on the Start Treatment Screen

- DEN-12761: Enabled an empty Patient ID.

It has not yet been implemented on the CloudSync App, so if sent empty CloudSystem will later reject to store the TxReport.

When later implemented an unassigned random Patient ID will be created for that TxReport to be later defined and assigned.

- DEN-12837, DEN-12840: The Disinfection Scheduling Entry and the Confirm button have been removed from the "Dialysate Generator Settings" screen.

- DEN-12837, DEN-12840: The "Dialysate Generator Settings" changed to "DG Cleaning" for the menu option and the screen title.

- Settings: The Clear Alarm Condition button has been removed from the settings screen for the release.

- Settings: The options which has no implementation for the phase 1 have been removed from the Settings screen Service mode options. [Language, Calibration, SW Update, Factory Reset]

- DEN-12841: Reworded the password entries in Service screen and for WiFi Join Screen.

- TxCode, TxReport: removed the commented out Treatment Report Parameters from the code.

- LOG: added one character space int he DEBUG log for the Not Enough Data in Types.

- Settings: The Service Dates default values changed from 0 to "" since they are strings.

- Settings: Added some clarification for the Home screen greetings

  1. … 31 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 153 more files in changeset.
DEN-12597 Code Review

http://dvm-linux02:8060/cru/UI-DEN-12258-1#c12773

Disabled the coco end as well, which caused the coco to log a lot of warnings.

  1. … 79 more files in changeset.
DEN-12515: KBM: Usual Meetings/Support/Development [ CS/UI Integration on device , Tx Log ]

- implemented the TxLog change request during the meeting.

- Also updated the state changes in the FW.

  1. … 6 more files in changeset.
DEN-12515: KBM: TxLog implementation

- implemented the message 1007 for TxLog to be sent to the CS on HD TxLog received message.

  1. … 4 more files in changeset.
DEN-12512: INT: Support/Meetings/Planning

DEN-09712 Date format between system date/time and BP/HP "Last Read" is not consistent

DEN-09929 Treatment Log shows "?C" instead of "°C"

PRS-35: Regarding Sean's point about the create treatment parameters, made the parameters dynamic by the Configurations/DataList.cfg in ui.config repository.

  1. … 12 more files in changeset.
DEN-12424: INT

- Adding the new 3 params of the alarm trigger

- Adding Rejection

- prepare for the singletons quit which are not in order, the quit should be done manually to be in order.

  1. … 20 more files in changeset.
DEN-12426: LTS: Bug / CR / Develop Coco / Manual

- removed the "// coco begin validated" to disable the manually validated coverage.

  1. … 80 more files in changeset.
DEN-12262: INT: Support and debugging

- Fixing the DG Valves/Temperature messages

- Fixing the CloudSync RegisterDeviceRequest

- Fixed/Cherry-Picked the Dialin-log conditions.

- Cleaned up the debug messages.

  1. … 17 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 72 more files in changeset.
DEN-10153: Treatment Log Comments Investigations

- Added the missing prescribed UF Volume, Rate to the log and review.

  1. … 2 more files in changeset.
DEN-12183 KBM: Credentials messaging

- Added Credential messages

| 2003 | req save credential |1639391827,1,0,2003,3,path_to_client_certificate_pem,path_to_client_private_key_pem,path_to_client_public_key_pem |

| 2004 | req credentials | 1639391827,1,0,2004,0 |

| 1004 | send credentials | 1639391827,1,0,1004,1,path_to_credentials="/tmp/credentials" |

  1. … 4 more files in changeset.
DEN-12106: Heparin Delivery Active Text Does Not Appear

  1. … 5 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 575 more files in changeset.
DEN-11380 KeborMed [ CloudSync Development ]

Added the treatment log saved/ready message.

  1. … 2 more files in changeset.
DEN-10205: BCuff [Missing Feature]: Try to reconnect to the previously paired

  1. … 18 more files in changeset.
DEN-10607: Implementing Heparin

- Post Treatment Log Review Screen and file output.

  1. … 4 more files in changeset.
DEN-10607: Implementation [Screen]

- DEN-10608: Implementation [Navigation]

- DEN-10609: Implementation [Treatment Log]

  1. … 7 more files in changeset.
DEN-10206: BCuff: Known bugs: Only pair with one BCuff at a time

- Added the bluetooth_remove_paired.sh script call

- Added the timeout safety for the script calls.

- Filtered the UI acknowledgment on only the messages intent for the UI only.

  1. … 11 more files in changeset.
CloudSync: Using Logger to write Buffer

- I found it unnecessary to use logger since this is the temporary approach and also CloudSyncController has a thread for itself and don't need to keep the Logger busy and also preferred to keep the CloudSync separated from the other entities.

  1. … 2 more files in changeset.
DEN-10599: KeborMed [CloudSync infrastructure kickoff ]

- The infrastructure is done for send and receive

- IT only needs interpretation on send and action on receive of messages in CloudSync communication.

  1. … 19 more files in changeset.
Part 1/2: make the unhandled messages dynamic

- The messages/unhandled.conf has been created in the settings area and will be loaded and used for the unhandled messages in the message interpreter.

  1. … 10 more files in changeset.
DEN-9639: Code Review 0

- Addressed code reviews

- Reoved LOG_DEBUG_UI since the DEBUG log is all about UI and adding a UI to it was useless.

- Removed the time stamp from the POST start/stop log since the log itself has timestamp.

- Added more documentation to the ApplicationPOST class.

- Renamed the FileSystem to ShaSum check in the ApplicationPOST.

- Updated the WiFi POST check funciton.

- Updated the initial Screen to pause the animation when the UI navigates out of that screen when we are in test (usual case should not happen since we fail or pass the POST and either stops the animation.)

- Updated the AlarmMapping to reflect the FILESYSTEM error change to SHASUM error.

  1. … 18 more files in changeset.
DEN-9826: Follow Up: UI_DEV: POST [ FS ]

- Added a shu256sum for the denali application.

  1. … 1 more file in changeset.