Activity leahi-dialin/leahi_dialin/td/treatment

Zoltan and I had a meeting, and the counter solution he provided works better than mine. He explained to me that my proposed solution has flaws. RESOLVED.

Zoltan and I had a meeting, and the counter solution he provided works better than mine.
He explained to me that my proposed solution has flaws.
RESOLVED.

11:45 am

Tiffany Mejia and Michael Garthwaite

More
LEAHI-DIALIN-LDT-4872-1
finished reviewing

2:03 pm

Zoltan Miskolci

More
25ee6be
changed 3 files
develop, version_fix

Merge branch 'LDT-4872-patient_vitals' into develop

- -0
- +2
./treatment_delivery.py
- History
- Source
- Diff
./treatment_delivery.py
… 2 more files in changeset.

4:20 pm

Zoltan Miskolci

More
3e8c157
changed 4 files
LDT-4003-hdf-fw-implementation-4-4, LDT-4611-hdf-fw-implementation-5-4 and 11 more LEAHI-DIALIN-LDT-4872-1

patient vitals module

- -0
- +2
./treatment_delivery.py
- History
- Source
- Diff
./treatment_delivery.py
… 3 more files in changeset.

12:55 pm

Sean Nash

More
LEAHI-DIALIN-LDT-4072-1
finished reviewing

3:02 pm

The approach of what this code does and the conversion module are similar in function but a differ on maintenance and flexibility. 1. The conversion module's bytearray to value methods work, but th...

The approach of what this code does and the conversion module are similar in function but a differ on maintenance and flexibility.
1. The conversion module's bytearray to value methods work, but they require manual logistic around the indexing. It's the user's responsibility to handle where the reading starts and you need to code the handler for that (previous approach with MsgFieldPositions), It's inflating the method. I worked hard to remove the need for indexing where the value starts. Instead of the previous struct.unpack approach, where you needed to maintain the type, you will be needing to maintain the conversion methods that are being called, so it would be the same as before, you still need to mind the indexing, which was the main reason of changing from this approach.

2. In the current approach, you declare the type and pass it to a processor that dynamically handling the unpack type (based on the set datatype) and the indexing for that. This works much better and easier to maintain, as you can just insert a new value when it's added to the FW, and don't need to adjust all your indexes for the reading.

Example #1, changing build type from U16 to U08:

with the conversion approach, you need to change the function used, and update the starting index for all the following methods.
with the current approach you change the Datatype.U16 to Datatype.U08 and that's all you need to do.

Example #2: adding a new variable fpga_micro after fpga_minor, with U08 type:

with the conversion approach, you add the bytearray_to_byte, update the indexes for all the following reads.
with the current approach you insert an element after the fpga_minor with a value ('fpga_micro', Datatype.U08), and nothing more needed

12:33 pm

Behrouz NematiPour

RESOLVED for now.

12:32 pm

Behrouz NematiPour

I would not do that because the function names and messages for each project should be different to avoid confusion. I think that is fine for now. RESOLVED.

I would not do that because the function names and messages for each project should be different to avoid confusion.
I think that is fine for now.

RESOLVED.

12:11 pm

Behrouz NematiPour

So the same channels are used for both the Leahi and Denali? I am not talking about how collisions are handled; that is handled by the CAN driver, not the FW or SW. My point is that the CAN Channel...

So the same channels are used for both the Leahi and Denali?
I am not talking about how collisions are handled; that is handled by the CAN driver, not the FW or SW.
My point is that the CAN Channels by themselves do not have the meaning we want; they are only a priority.
As we defined them, we gave them a meaning as a category; therefore, it is better to name them the Denali/Leahi Channels rather than the CAN Channels.

12:06 pm

Behrouz NematiPour

RESOLVED.

12:06 pm

Behrouz NematiPour

def fp_versions(self, major: int, minor: int, micro: int, build: int, fpga_id: int, fpga_major: int, fpga_minor: int, fpga_lab: int, compatibility_rev: int...

def fp_versions(self, major: int, minor: int, micro: int, build: int,
                     fpga_id: int, fpga_major: int, fpga_minor: int, fpga_lab: int,
                     compatibility_rev: int):
     """
     Broadcasts the current dd Version Data (Msg ID: 0x0F, 15)
     Args:
         @param major: (uint) - Major version number
         @param minor: (uint) - Minor version number
         @param micro: (uint) - Micro version number
         @param build: (uint) - Build version number
         @param fpga_id: (int) - FPGA id version number
         @param fpga_major: (int) - FPGA Major version number
         @param fpga_minor: (int) - FPGA Minor version number
         @param fpga_lab: (int) - FPGA Lab version number
         @param compatibility_rev: (uint) - The FWs/UI compatibility revision
     @return: None
     """
     if not self.can_enabled:
         raise ValueError("CAN Interface is not enabled")

     payload =  conversions.unsigned_byte_to_bytearray   (major            )
     payload += conversions.unsigned_byte_to_bytearray   (minor            )
     payload += conversions.unsigned_byte_to_bytearray   (micro            )
     payload += conversions.unsigned_short_to_bytearray  (build            )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_id          )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_major       )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_minor       )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_lab         )
     payload += conversions.unsigned_integer_to_bytearray(compatibility_rev)

     message = CAN.CanMessage.build_message(
                                         channel_id=CAN.CanChannels.fp_sync_broadcast_ch_id,
                                         message_id=msg_ids.MsgIds.MSG_ID_FP_VERSION_RESPONSE.value,
                                         payload=payload)

     self.can_interface.send(message, 0)

12:30 pm

Zoltan Miskolci

More
5994ade
changed 5 files
LDT-3735-non-volatile-memory, LDT-5152-handler_refactor and 5 more LEAHI-DIALIN-LDT-3735-1 LEAHI-DIALIN-LDT-5152-1

Merge branch 'staging' into LDT-3735-non-volatile-memory

- -10
- +14
./treatment_delivery.py
- History
- Source
- Diff
./treatment_delivery.py
… 4 more files in changeset.

10:50 am

Michael Garthwaite

More
LEAHI-DIALIN-LDT-4072-1
finished reviewing

9:44 am

Zoltan Miskolci

Being generic is the whole point of it. It was renamed because this is a dialin dedicated to Leahi unit and calling the messages DenaliMessage is misleading. It was renamed to CanMessage for 2 reas...

Being generic is the whole point of it.
It was renamed because this is a dialin dedicated to Leahi unit and calling the messages DenaliMessage is misleading.
It was renamed to CanMessage for 2 reason:
1. This is a Leahi only dialin, so there is no need to differentiate between different type of Can Messages as there would be only 1 type
2. Calling it CanMessage will make it more future compatible when the dialin get copied over for a new unit development (unlikely in the foreseeable future but possible), removing the need to rename it again

9:43 am

Zoltan Miskolci

There is no Leahi or Denali CANChannels. There are CAN channels and the naming is what that channel is being used for. The collision occurs in the FW and the FW handles it before sending out a mess...

There is no Leahi or Denali CANChannels.
There are CAN channels and the naming is what that channel is being used for.
The collision occurs in the FW and the FW handles it before sending out a message.
When reading a CAN, there are no collisions, so there are no priorities. So I have no clue what you want here.

9:39 am

Zoltan Miskolci

done

9:39 am

Zoltan Miskolci

I have no idea what you are referring to as the link is not working. The need to define the type and the name of the data being read is necessary, so if it's not here it will be somewhere else, tha...

I have no idea what you are referring to as the link is not working.
The need to define the type and the name of the data being read is necessary, so if it's not here it will be somewhere else, that we can't escape.
Exporting that to different files won't serve a purpose and will only increase complexity as when debugging you will need to reference a separate file.
For the defs it made sense as they are used multiple places, but what a message contains is a single use place, so storing it separately is meaningless as it won't have any use outside of this single function.

9:18 am

Zoltan Miskolci

More
5da4d35
changed 1 file
LDT-4484-dry_self_test LEAHI-DIALIN-LDT-4484-1

Merge branch 'staging' into LDT-4484-dry_self_test

- -10
- +14
./treatment_delivery.py
- History
- Source
- Diff
./treatment_delivery.py

treatment_delivery.py

Stats

Commits this week: 6

Commit Activity

52 week commits volume

Commits by day

Commits by hour

Commit calendar

Most active committers (90 days)

Zoltan Miskolci

Zoltan Miskolci

Vendor - TEL - Arpita Srivastava

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Raghu Kallala

Dara Navaei

Michael Garthwaite

Dara Navaei

Tiffany Mejia and Michael Garthwaite

Zoltan Miskolci

Behrouz NematiPour

Tiffany Mejia and Michael Garthwaite

Zoltan Miskolci

Zoltan Miskolci

Sean Nash

Zoltan Miskolci

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Zoltan Miskolci

Michael Garthwaite

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci