Activity leahi-dialin/leahi

Zoltan and I had a meeting, and the counter solution he provided works better than mine. He explained to me that my proposed solution has flaws. RESOLVED.

Zoltan and I had a meeting, and the counter solution he provided works better than mine.
He explained to me that my proposed solution has flaws.
RESOLVED.

2:54 pm

Zoltan Miskolci

More
b167367
changed 4 files
LDT-5152-handler_refactor, handler_refactor LEAHI-DIALIN-LDT-5152-1

demo

- -0
- +128
./abstract_classes.py
- History
- Source
- Diff
./abstract_classes.py
… 3 more files in changeset.

3:08 pm

Vendor - TEL - Santhoshkumar Reddy Alasandagutti

3:11 pm

Vinayakam Mani

More
LEAHI-DIALIN-LDT-4160-1
finished reviewing

3:02 pm

The approach of what this code does and the conversion module are similar in function but a differ on maintenance and flexibility. 1. The conversion module's bytearray to value methods work, but th...

The approach of what this code does and the conversion module are similar in function but a differ on maintenance and flexibility.
1. The conversion module's bytearray to value methods work, but they require manual logistic around the indexing. It's the user's responsibility to handle where the reading starts and you need to code the handler for that (previous approach with MsgFieldPositions), It's inflating the method. I worked hard to remove the need for indexing where the value starts. Instead of the previous struct.unpack approach, where you needed to maintain the type, you will be needing to maintain the conversion methods that are being called, so it would be the same as before, you still need to mind the indexing, which was the main reason of changing from this approach.

2. In the current approach, you declare the type and pass it to a processor that dynamically handling the unpack type (based on the set datatype) and the indexing for that. This works much better and easier to maintain, as you can just insert a new value when it's added to the FW, and don't need to adjust all your indexes for the reading.

Example #1, changing build type from U16 to U08:

with the conversion approach, you need to change the function used, and update the starting index for all the following methods.
with the current approach you change the Datatype.U16 to Datatype.U08 and that's all you need to do.

Example #2: adding a new variable fpga_micro after fpga_minor, with U08 type:

with the conversion approach, you add the bytearray_to_byte, update the indexes for all the following reads.
with the current approach you insert an element after the fpga_minor with a value ('fpga_micro', Datatype.U08), and nothing more needed

12:33 pm

Behrouz NematiPour

RESOLVED for now.

12:32 pm

Behrouz NematiPour

I would not do that because the function names and messages for each project should be different to avoid confusion. I think that is fine for now. RESOLVED.

I would not do that because the function names and messages for each project should be different to avoid confusion.
I think that is fine for now.

RESOLVED.

12:17 pm

Vendor - TEL - Santhoshkumar Reddy Alasandagutti

even though we are sending U08 at Firmware. Due to structure padding Raw message for priority is converted as 16 bits. While receiving we need to read them as U16. Here is my debug values [CortexR4...

even though we are sending U08 at Firmware. Due to structure padding Raw message for priority is converted as 16 bits. While receiving we need to read them as U16. Here is my debug values [CortexR4] ALARM_PROP_T size = 22 bytes
byte[0] = 0x03
byte[1] = 0x00
byte[2] = 0x6F
byte[3] = 0x00
byte[4] = 0x01
byte[5] = 0x00
byte[6] = 0x00
byte[7] = 0x01
byte[8] = 0x00
byte[9] = 0x00
byte[10] = 0x01
byte[11] = 0x00
byte[12] = 0x00
byte[13] = 0x01
byte[14] = 0x00
byte[15] = 0x00
byte[16] = 0x01
byte[17] = 0x00
byte[18] = 0x00
byte[19] = 0x01
byte[20] = 0x0A
byte[21] = 0x00

This is structure defined at firmware side
struct AlarmTableRequestPayload

Unknown macro: { U08 alarmPriority; U16 alarmSubRank; U08 alarmSource; U08 alarmIsFault; U08 alarmIsDDFault; U08 alarmStops; U08 alarmConditionClearImmed; ///< Alarm condition is cleared immediately (does not persist after alarm triggered) U08 alarmNoClear; ///< Alarm cannot be cleared (unrecoverable)? U08 alarmNoResume; ///< Alarm prevents treatment resume U08 alarmNoRinseback; ///< Alarm prevents rinseback U08 alarmNoEndTreatment; ///< Alarm prevents ending treatment U08 alarmBlockRinseback; ///< Alarm should not trigger while in rinseback states U08 alarmBlockEndTx; ///< Alarm should not trigger while in post-treatment mode U08 alarmNoBloodRecirc; ///< Alarm prevents blood re-circulation U08 alarmNoDialysateRecirc; ///< Alarm prevents dialysate re-circulation U08 alarmAutoResume; ///< Alarm should resume automatically once the condition is cleared U08 alarmClearOnly; ///< Clear only this alarm on user acknowledgment U08 alarmTreatmentLog; ///< Log alarm to treatment log if active during treatment U16 alarmID; ///< Alarm ID }

;
typedef struct AlarmTableRequestPayload ALARM_PROP_T;

12:11 pm

Behrouz NematiPour

So the same channels are used for both the Leahi and Denali? I am not talking about how collisions are handled; that is handled by the CAN driver, not the FW or SW. My point is that the CAN Channel...

So the same channels are used for both the Leahi and Denali?
I am not talking about how collisions are handled; that is handled by the CAN driver, not the FW or SW.
My point is that the CAN Channels by themselves do not have the meaning we want; they are only a priority.
As we defined them, we gave them a meaning as a category; therefore, it is better to name them the Denali/Leahi Channels rather than the CAN Channels.

12:06 pm

Behrouz NematiPour

RESOLVED.

12:06 pm

Behrouz NematiPour

def fp_versions(self, major: int, minor: int, micro: int, build: int, fpga_id: int, fpga_major: int, fpga_minor: int, fpga_lab: int, compatibility_rev: int...

def fp_versions(self, major: int, minor: int, micro: int, build: int,
                     fpga_id: int, fpga_major: int, fpga_minor: int, fpga_lab: int,
                     compatibility_rev: int):
     """
     Broadcasts the current dd Version Data (Msg ID: 0x0F, 15)
     Args:
         @param major: (uint) - Major version number
         @param minor: (uint) - Minor version number
         @param micro: (uint) - Micro version number
         @param build: (uint) - Build version number
         @param fpga_id: (int) - FPGA id version number
         @param fpga_major: (int) - FPGA Major version number
         @param fpga_minor: (int) - FPGA Minor version number
         @param fpga_lab: (int) - FPGA Lab version number
         @param compatibility_rev: (uint) - The FWs/UI compatibility revision
     @return: None
     """
     if not self.can_enabled:
         raise ValueError("CAN Interface is not enabled")

     payload =  conversions.unsigned_byte_to_bytearray   (major            )
     payload += conversions.unsigned_byte_to_bytearray   (minor            )
     payload += conversions.unsigned_byte_to_bytearray   (micro            )
     payload += conversions.unsigned_short_to_bytearray  (build            )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_id          )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_major       )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_minor       )
     payload += conversions.unsigned_byte_to_bytearray   (fpga_lab         )
     payload += conversions.unsigned_integer_to_bytearray(compatibility_rev)

     message = CAN.CanMessage.build_message(
                                         channel_id=CAN.CanChannels.fp_sync_broadcast_ch_id,
                                         message_id=msg_ids.MsgIds.MSG_ID_FP_VERSION_RESPONSE.value,
                                         payload=payload)

     self.can_interface.send(message, 0)

10:06 am

Zoltan Miskolci

FW sends U16 for now, after it's changed to U08, this will be updated

2:57 pm

Vinayakam Mani

More
Re: LEAHI-DIALIN-LDT-4160-1
commented on review

Priority data type is U08?

12:28 pm

Zoltan Miskolci , Tiffany Mejia and Michael Garthwaite

More
LEAHI-DIALIN-LDT-4160-1
finished reviewing

12:24 pm

Zoltan Miskolci

More
8f1ef71
changed 2 files
LDT-3735-non-volatile-memory, LDT-4003-hdf-fw-implementation-4-4 and 24 more LEAHI-DIALIN-LDT-3735-1 LEAHI-DIALIN-LDT-4787-1

Merge branch 'LDT-4160-alarm_table' into staging

- -2
- +2
./abstract_classes.py
- History
- Source
- Diff
./abstract_classes.py
… 1 more file in changeset.

11:26 am

Zoltan Miskolci

More
cc8682c
changed 3 files
develop, version_fix

Merge branch 'LDT-4160-alarm_table' into develop

- -2
- +2
./abstract_classes.py
- History
- Source
- Diff
./abstract_classes.py
… 2 more files in changeset.

9:44 am

Zoltan Miskolci

Being generic is the whole point of it. It was renamed because this is a dialin dedicated to Leahi unit and calling the messages DenaliMessage is misleading. It was renamed to CanMessage for 2 reas...

Being generic is the whole point of it.
It was renamed because this is a dialin dedicated to Leahi unit and calling the messages DenaliMessage is misleading.
It was renamed to CanMessage for 2 reason:
1. This is a Leahi only dialin, so there is no need to differentiate between different type of Can Messages as there would be only 1 type
2. Calling it CanMessage will make it more future compatible when the dialin get copied over for a new unit development (unlikely in the foreseeable future but possible), removing the need to rename it again

9:43 am

Zoltan Miskolci

There is no Leahi or Denali CANChannels. There are CAN channels and the naming is what that channel is being used for. The collision occurs in the FW and the FW handles it before sending out a mess...

There is no Leahi or Denali CANChannels.
There are CAN channels and the naming is what that channel is being used for.
The collision occurs in the FW and the FW handles it before sending out a message.
When reading a CAN, there are no collisions, so there are no priorities. So I have no clue what you want here.

9:39 am

Zoltan Miskolci

done

9:39 am

Zoltan Miskolci

I have no idea what you are referring to as the link is not working. The need to define the type and the name of the data being read is necessary, so if it's not here it will be somewhere else, tha...

I have no idea what you are referring to as the link is not working.
The need to define the type and the name of the data being read is necessary, so if it's not here it will be somewhere else, that we can't escape.
Exporting that to different files won't serve a purpose and will only increase complexity as when debugging you will need to reference a separate file.
For the defs it made sense as they are used multiple places, but what a message contains is a single use place, so storing it separately is meaningless as it won't have any use outside of this single function.

5:33 pm

Behrouz NematiPour

More
Re: LEAHI-DIALIN-LDT-4484-1
commented on review

I am happy to see that this old code is improving. I would recommend using the Conversion module instead of strings and DataTypes, as it handles everything automatically. Examples can be found in t...

I am happy to see that this old code is improving.
I would recommend using the Conversion module instead of strings and DataTypes, as it handles everything automatically.
Examples can be found in the following file in this CR:
https://devapps.diality.us/cru/#LEAHI-DIALIN-LDT-4484-1CFR-84688

5:19 pm

Behrouz NematiPour

More
Re: LEAHI-DIALIN-LDT-4484-1
commented on review

Please add a docstring for the function. including the intention and parameters with their intentions.

Please add a docstring for the function.
including the intention and parameters with their intentions.

5:17 pm

Behrouz NematiPour

More
Re: LEAHI-DIALIN-LDT-4484-1
commented on review

Same for CanChannels. The Channels we are referring to here are Leahi's or Denali's. Channels mainly have no meaning beyond their priorities when a collision occurs.

Same for CanChannels.
The Channels we are referring to here are Leahi's or Denali's.
Channels mainly have no meaning beyond their priorities when a collision occurs.

utils

Stats

Commits this week: 3

Commit Activity

52 week commits volume

Commits by day

Commits by hour

Commit calendar

Most active committers (90 days)

Zoltan Miskolci

Zoltan Miskolci

Vendor - TEL - Arpita Srivastava

Zoltan Miskolci

Raghu Kallala

Dara Navaei

Tiffany Mejia and Michael Garthwaite

Behrouz NematiPour

Zoltan Miskolci

Vendor - TEL - Santhoshkumar Reddy Alasandagutti

Vinayakam Mani

Zoltan Miskolci

Behrouz NematiPour

Behrouz NematiPour

Vendor - TEL - Santhoshkumar Reddy Alasandagutti

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Zoltan Miskolci

Vinayakam Mani

Zoltan Miskolci , Tiffany Mejia and Michael Garthwaite

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Zoltan Miskolci

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour