DIALIN-DENBUG-280-1 DIALIN-DENBUG-280_Issues With HD Broadcast P1B

closed on 06 Nov 24

Author

Moderator

Reviewers

DIALIN-DENBUG-280_Issues With HD Broadcast P1B

Activity

Details
Objectives
General Comments 0
Unresolved
Resolved
Number of files included: 196

dialin 0
- Folder dialin 0
  - Folder common 0
    - File alarm_defs.py 0 Remove
    - File alarm_priorities.py 0 Remove
    - File dg_defs.py 0 Remove
    - File hd_defs.py 0 Remove
    - File msg_defs.py 0 Remove
    - File msg_ids.py 0 Remove
    - File prs_defs.py 0 Remove
    - File test_config_defs.py 0 Remove
    - File ui_defs.py 0 Remove
  - Folder dg 0
    - File __init__.py 0 Remove
    - File accelerometer.py 0 Remove
    - File alarms.py 0 Remove
    - File calibration_record.py 0 Remove
    - File chemical_disinfect.py 0 Remove
    - File chemical_disinfect_flush.py 0 Remove
    - File concentrate_pumps.py 0 Remove
    - File conductivity_sensors.py 0 Remove
    - File constants.py 0 Remove
    - File cpld.py 0 Remove
    - File dg_test_configs.py 0 Remove
    - File dialysate_fill.py 0 Remove
    - File dialysate_generator.py 0 Remove
    - File drain.py 0 Remove
    - File drain_pump.py 0 Remove
    - File events.py 0 Remove
    - File fans.py 0 Remove
    - File flow_sensors.py 0 Remove
    - File fluid_leak.py 0 Remove
    - File flush.py 0 Remove
    - File gen_idle.py 0 Remove
    - File hd_proxy.py 0 Remove
    - File heat_disinfect.py 0 Remove
    - File heat_disinfect_active_cool.py 0 Remove
    - File heaters.py 0 Remove
    - File load_cells.py 0 Remove
    - File pressures.py 0 Remove
    - File reservoirs.py 0 Remove
    - File ro_permeate_sample.py 0 Remove
    - File ro_pump.py 0 Remove
    - File rtc.py 0 Remove
    - File samplewater.py 0 Remove
    - File scheduled_runs_record.py 0 Remove
    - File service_record.py 0 Remove
    - File sw_configs.py 0 Remove
    - File switches.py 0 Remove
    - File system_record.py 0 Remove
    - File temperatures.py 0 Remove
    - File thermistors.py 0 Remove
    - File usage_info_record.py 0 Remove
    - File uv_reactors.py 0 Remove
    - File valves.py 0 Remove
    - File voltages.py 0 Remove
    - File watchdog.py 0 Remove
  - Folder hd 0
    - File accelerometer.py 0 Remove
    - File air_bubbles.py 0 Remove
    - File air_pump.py 0 Remove
    - File air_trap.py 0 Remove
    - File alarms.py 0 Remove
    - File battery.py 0 Remove
    - File blood_flow.py 0 Remove
    - File blood_leak.py 0 Remove
    - File buttons.py 0 Remove
    - File calibration_record.py 0 Remove
    - File constants.py 0 Remove
    - File dg_proxy.py 0 Remove
    - File dialysate_inlet_flow.py 0 Remove
    - File dialysate_outlet_flow.py 0 Remove
    - File fans.py 0 Remove
    - File fluid_leak.py 0 Remove
    - File hd_events.py 0 Remove
    - File hd_test_configs.py 0 Remove
    - File hemodialysis_device.py 0 Remove
    - File institutional_record.py 0 Remove
    - File post_treatment.py 0 Remove
    - File pressure_occlusion.py 0 Remove
    - File pretreatment.py 0 Remove
    - File reservoirs.py 0 Remove
    - File rtc.py 0 Remove
    - File service_record.py 0 Remove
    - File sw_configs.py 0 Remove
    - File switches.py 0 Remove
    - File syringe_pump.py 0 Remove
    - File system_record.py 0 Remove
    - File temperatures.py 0 Remove
    - File treatment.py 0 Remove
    - File ui_proxy.py 0 Remove
    - File usage_info_record.py 0 Remove
    - File valves.py 0 Remove
    - File voltages.py 0 Remove
    - File watchdog.py 0 Remove
  - Folder protocols 0
    - File CAN.py 0 Remove
  - Folder ui 0
    - File crc.py 0 Remove
    - File dg_simulator.py 0 Remove
    - File hd_simulator.py 0 Remove
    - File hd_simulator_alarms.py 0 Remove
    - File messageBuilder.py 0 Remove
    - File unittests.py 0 Remove
    - File utils.py 0 Remove
  - Folder utils 0
    - File base.py 0 Remove
    - File checks.py 0 Remove
    - File conversions.py 0 Remove
    - File data_logger.py 0 Remove
    - File excel_ops.py 0 Remove
    - File helpers.py 0 Remove
    - File nv_ops_utils.py 0 Remove
    - File singleton.py 0 Remove
  - File version.py 0 Remove
- Folder docs/source 0
  - File conf.py 0 Remove
- Folder tests 0
  - Folder peter 0
    - File set_RTCs.py 0 Remove
    - File test_POST.py 0 Remove
    - File test_blood_flow.py 0 Remove
    - File test_can.py 0 Remove
    - File test_data_logger.py 0 Remove
    - File test_debug_text.py 0 Remove
    - File test_demo.py 0 Remove
    - File test_dg_records.py 0 Remove
    - File test_dg_thermistors.py 0 Remove
    - File test_dg_valves.py 0 Remove
    - File test_dg_valves_observer.py 0 Remove
    - File test_fw_controller.py 0 Remove
    - File test_gen_requirements.py 0 Remove
    - File test_hd_dg_simulators.py 0 Remove
    - File test_hd_fluid_leak.py 0 Remove
    - File test_hd_records.py 0 Remove
    - File test_hd_reset.py 0 Remove
    - File test_hd_simulator.py 0 Remove
    - File test_hd_valves.py 0 Remove
    - File test_listener.py 0 Remove
    - File test_logging.py 0 Remove
    - File test_print_version.py 0 Remove
    - File test_single_alarm.py 0 Remove
    - File test_temperature_sensors.py 0 Remove
    - File test_ui_proxy.py 0 Remove
  - Folder unit_tests 0
    - File run_all.sh 0 Remove
    - File test_constructors.py 0 Remove
    - File test_dg_temperature_sensors.py 0 Remove
    - File test_enums.py 0 Remove
    - File test_imports.py 0 Remove
    - File test_msg_ids.py 0 Remove
    - File test_ui_proxy.py 0 Remove
  - File DebugMsgCatcher.py 0 Remove
  - File air_trap_levels.py 0 Remove
  - File dg_hd_switches_test.py 0 Remove
  - File dg_heaters_test.py 0 Remove
  - File dg_nvm_scripts.py 0 Remove
  - File dg_tests.py 0 Remove
  - File dg_valves_test.py 0 Remove
  - File flow_sensor_data_processor.py 0 Remove
  - File hd_air_bubbles_data.py 0 Remove
  - File hd_blood_leak_data.py 0 Remove
  - File hd_fluid_leak_state.py 0 Remove
  - File hd_nvm_scripts.py 0 Remove
  - File hd_test_pumps_open_loop.py 0 Remove
  - File hd_valves_test.py 0 Remove
  - File set_accels_cal.py 0 Remove
  - File set_flow_sensors_cal.py 0 Remove
  - File test_alarms.py 0 Remove
  - File test_buttons.py 0 Remove
  - File test_can_xmit.py 0 Remove
  - File test_conductivity.py 0 Remove
  - File test_deprime.py 0 Remove
  - File test_dg_records.py 0 Remove
  - File test_dg_valves.py 0 Remove
  - File test_dialysate_flow_sensor.py 0 Remove
  - File test_flush.py 0 Remove
  - File test_hd.py 0 Remove
  - File test_hd_dg_fans.py 0 Remove
  - File test_hd_records.py 0 Remove
  - File test_hd_valves.py 0 Remove
  - File test_heparin.py 0 Remove
  - File test_heprin_bolus_target_rate.py 0 Remove
  - File test_lc.py 0 Remove
  - File test_nelson_labs_disinfect.py 0 Remove
  - File test_saline_bolus.py 0 Remove
  - File test_syringe.py 0 Remove
  - File test_tx_config_tests.py 0 Remove
  - File test_uf.py 0 Remove
  - File test_uv_reactors.py 0 Remove
  - File test_voltages.py 0 Remove
- Folder tools 0
  - File Code_Report.csv 0 Remove
  - File bring_can_interface_down.sh 0 Remove
  - File build_readme_pdf.sh 0 Remove
  - File cr_objectives.sh 0 Remove
  - File document.sh 0 Remove
  - File gen_common_defs.sh 0 Remove
  - File install_to_venv.sh 0 Remove
  - File run_reset_hd.sh 0 Remove
  - File run_static_code_analysis.sh 0 Remove
  - File run_unit_tests.sh 0 Remove
  - File setup_canbus.sh 0 Remove
  - File setup_environment.sh 0 Remove
  - File setup_virtual_can.sh 0 Remove
  - File start_env.sh 0 Remove
- File README.md 0 Remove
- File build.sh 0 Remove
- File setup.py 0 Remove

#permalink

Details

Warning: no files are visible, they have all been filtered.

Participant	Role	Time Spent	Comments
Michael Garthwaite	Author & Moderator	0m
Dara Navaei	Reviewer - 0% reviewed	0m
Sean Nash	Reviewer - 0% reviewed
Behrouz NematiPour	Reviewer - 0% reviewed
Tiffany Mejia	Reviewer - 0% reviewed
jpaguio (deleted user)	Reviewer - 0% reviewed
Vinayakam Mani	Reviewer - 0% reviewed
Total		0m	0

#permalink

Objectives

There are no specific objectives for this review.

Branches in review

#permalink

Issues Raised From Comments

Key	Summary	State	Assignee

#permalink

General Comments

There are no general comments on this review.

Click to load diff

Notation	Description
[Crucible Review CR-1\|CR-1]	Creates a link to a Crucible review or FishEye artifact using the internal key reference for the item. Example: [Crucible Review CR-1\|CR-1]
[Atlassian Crucible\|http://atlassian.com/crucible]	Creates a link to an external resource, special characters that come after the URL and are not part of it must be separated with a space. External links are denoted with an arrow icon. Example: Atlassian Crucible
{cs:id=1\|rep=repository-key}	Render a link to the changeset Example: 1
bold	Makes text appear bold.
_italic_	Makes text appear in italics.
+underline+	Makes text appear underlined.
??citation??	Makes text appear in citation form.
-strikethrough-	Makes text appear ~~struck through~~.
^superscript^	Makes text appear in ^superscript.
~subscript~	Makes text appear in _subscript.
{{ monospaced }}	Placing double curly-brackets around text makes it appear `monospaced`.
{code} // Some comments here public String getFoo() { return foo; } {code}	The code macro displays a preformatted block for showing code with syntax highlighting. Example: // Some comments here public String getFoo() { return foo; }
bq. Block Quote	To make an entire paragraph into a block quotation, place "bq. " before it. Example: Block Quote
{quote} here is quoteable content to be quoted {quote}	Quote a block of text that's longer than one paragraph. Example: here is quoteable content to be quoted
{color:red} look ma, red text!{color}	Changes the color of a block of text. Example: look ma, red text!
* A list with bullets * Second item ** Indented item	Example: A list with bullets Second item Indented item
# A list with numbers # Second item ## Indented item	Example: A list with numbers Second item Indented item

DIALIN-DENBUG-280-1

DIALIN-DENBUG-280_Issues With HD Broadcast P1B

DIALIN-DENBUG-280-1 0

Details

Objectives

Branches in review

Issues Raised From Comments

General Comments

Log time

DIALIN-DENBUG-280_Issues With HD Broadcast P1B

DIALIN-DENBUG-280-1 0

Summarize the review outcomes (optional)

Details

Objectives

Branches in review

Issues Raised From Comments

General Comments

Log time