MainStack.qml

Clone Tools
  • last updated a few minutes ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DENBUG-207: UI: UI does not reset to default parameters upon new patient

DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

  1. … 4 more files in changeset.
DEN-12728: UI: UI does not clean up Treatment Parameter settings for different patient

- the reset is added to the treatment parameters

- the foundation of the pre-population has been added but still there is parts need to be added to store the sliders' On/Off switch to be restored which is needed for the slider to set properly.

  1. … 4 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 15 more files in changeset.
DEN-15812: UI: Add an option on the Configurations setup screen to prevent the Device Registration cleanup

- Added the UI portion of the update

- Added the -U cmd-line option to get UI Application in update mode.

  1. … 12 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 73 more files in changeset.
Merge branch 'DEN-15279-UI-BN-S97-Cybersecurity' into staging

  1. … 115 more files in changeset.
DEN-15296 : Implemented the screen base and navigation of the denali -E

  1. … 23 more files in changeset.
DEN-14955 Quick Start : MainTreatment - Cleaned up RangeRect, etc to not have rounding property per design update - Update treatment duration screen per Behrouz's request to center slider arrows on confirm button - Updated ultraFiltration screens to have slider arrows

  1. … 18 more files in changeset.
DEN-14955 : Quick Start - Main treatment Screens - Update screens to appropriately use or not use rounded sliders

  1. … 18 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 11 more files in changeset.
Merge branch 'DEN-14909-UI-VD-S92-QS-Sliders' into staging

  1. … 6 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 15 more files in changeset.
DEN-14858 : UI should navigate to Standby screen on Fault state

  1. … 3 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 50 more files in changeset.
Merge branch 'DEN-14733-UI-BN-S90-2' into staging

  1. … 43 more files in changeset.
DEN-14736 : IMP: Dry-Demo Support

- added the CLI switch -D : --enable-dry-demo

- added the CLI switch -A : --active-can-bus <CANBus>

- added the CLI switch -F : --disable-fault-screen

- will send confirmation response with ConfirmationID of 99 and as accepted(1):

- e.g. 03:32:29.560,bb00,UI,Confirm,99,1

  1. … 11 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 608 more files in changeset.
DEN-14391 , DEN-14393 : Qt 5.15.10 [QML run-time issues]

- Fixed all the QML warning and errors

- Enabled the Clang-Tidy, Clazy and cppcheck and fixed some.

- Removed unused images

- made the Denali POST logo transparent.

  1. … 56 more files in changeset.
DEN-13939: IMP: Fixed the merge issue

- Not sure why git didn't get the changes on the ModalDialog's Norification changes to NotificationSmall, and caused the issue on the property IconVisible.

  1. … 8 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 95 more files in changeset.
Merge branch 'DEN-13198-UI_BN_75' into staging

  1. … 45 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 100 more files in changeset.
Merge branch 'Build_Issue_Merging__DEN-12716-UI_BN_S70__to__staging' into develop

  1. … 1 more file in changeset.
DEN-13845: CRV: Merge issue of DEN-12716-UI_BN_S70 into staging

- Due to some enum changes, UI couldn't build

- An idea implemented to detect the enum changes by compiler. The implementation may be able to improve.

  1. … 12 more files in changeset.
DEN-13844: DEN-13774: VITALS numpad appears during rinseback if BP interval is on

- It was only working on the HDOpMode to be in-treatment, but needed to get the HDTreatmentState as well to make sure it is in Dialysis state too.

  1. … 7 more files in changeset.
DEN-13743: IMP: Mostly worked on Alarm Dialog/Bar

- Changed the Alarm Dialog (Title decreased by 4, Description increased by 4) / Bar (increased by 6) font size,

- Adjusted the AlarmDialog Timer position and layout.

- Removed the mouseArea from the WaitDone component.

- Added titel/description fontPixedSize for the NotificationDialog and NotificationBar

- Clear the reasontext on home screen when is not visible anymore.

- Clear the reasontext on SettingsDG when is not visible anymore.

- Used NotificationBarSmall instead of NotificationBar in:

- ModalDialog

- MainHome

- TreatmentAdjustmentBase

- TreatmentFlowBase

  1. … 15 more files in changeset.
DEN-13645: IMP: DEN-9297: Disinfection messaging flow review

- Disinfection current code/design review

- Disinfection Screens and Navigation implementation

- There are functions and properties used but not implemented yet in vDisinfectAdjustDisinfect, and some that are implemented are not implemented with the new design.

  1. … 7 more files in changeset.
DEN-13645 IMP: DEN-12958: UI shall generate the POST fail alarm if the SD-Card not present and stop logging

__________

- Log Export

- Added the Alarm generation on the GuiController if SD-Card is not ready, or is/becomes read-only.

- AlarmGenerator

- Added the SD-Card failure alarm - ALARM_ID_UI_POST_FAILURE_SDCARD

- Added alarm clear - ALARM_ID_NO_ALARM

- Added a flag to stop logging if the SD-Card is not ready or is readonly.

- Removed pause on log clean up.

- Improved the DeviceController SD-Card, USB status detection.

- Fixed and improved the MVC connection betweein device/Application/Gui controllers.

- A CLI switch ( -S ) added to disable the feature that is disabling the log if the SD-Card doesn't exist. So if the -S switch is used while calling the denali application, the logging will NOT be disabled, if SD-Card fails.

- In the ExportButton and USBButton(eject) removed the enable logic and has to be done outside of the component. It has been done for the Settings/export and Post-Tx/Review.

- Added title and file count for each SD-Card and USB-Drive panels.

__________

- Run.sh

- Added a check for the CloudSync and if the folder doesn't exist it won't do the rest

- Kill the denali application, in case it is still running.

- Added SD-Card type as part of its detection and if it is not ext4 format it fails the test.

- Optimized the mount point detection.

__________

- NoCANBus

- added the NoCANBus to the fault and init modes to not to navigate to those if NoCANBus is true. Otherwise it conflict with navigate to the home.

- Added a log in case the NoCANBus is enabled.

__________

- Settings

- Converted the '\n' in the settings values to actual newline character.

__________

- Thread:

- Moved the QuiController in its own thread, _Gui_Thread.

__________

- Alarms

- Added an emit to update the Alarm Dialog with the latest title/message, received from Alarms.conf In case there was an alarm before even Alarm.conf is read.

  1. … 27 more files in changeset.
13645 Improving NoCANBus DevConf

DEN-13489: IMP: General Implementation for any bugs and any other implementations

- Enable Dialin logging CL switch has changed to disable dialin logging, to make the dialin logging as enabled by default and removed -d from run.sh. [Sean's Request]

- Added log unhandled as error to the unhandled reader as well.

- Implemented the NoCANBus to be used when no CANBus enabled. For now it is only bypassing the create treatment button command and helps to get to the treatment parameters for the touchscreen test. [EEMN's Support]

- Fixed a bug on the Volume Adjustment on post, sending to HD to update HD alarm volume with previous, adjusted value, which was sending a request one again receiving HD response, and it was a potential crash loop.

- Added disable acknowledgment logs (req,bak) CL switch, -K : --disable-acknow-log [Sean's Request]

  1. … 14 more files in changeset.