Activity application/AlarmMapping.csv

- Added the disable functionality ( main.h SINGLETON_... macros ) for the Singleton classes, which are basically controllers, to stop their thread event loop, so they literally stop working.

- Connected the disable functionality of the controllers like, CloudSync, Bluetooth (Maybe later Logger), to the POST result.

- Improved the ./run.sh script and same on the ApplicationPOST class.

- Set the minimum of the HD/DG serial length to 1 byte, since it is not exactly at 15 or 20 char length.

- Removed the "CS" from the UI log of sending out the messages to CS, which the source is UI, not the CS and this is confusing.

- Removed the "Settings/DG Cleaning" scheduling section.

- Changed the POST version/serial request from UI to all to be identified in the log from "Versionreq" to "POSTInfReq".

- Added a new UI POST Alarm in AlarmDefs.h, ALARM_ID_UI_POST_FAILURE_CLOUDSYNC = 295, ///< UI POST CloudSync failure

- Fixed a potential bug on SD-Card not ready service logging.

- -1
- +2
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 16 more files in changeset.

3:52 pm

Behrouz NematiPour

More
c4b9550
changed 3 files
master, @Environement_Swith and 190 more UI-UCOMMITS-4

DEN-13645: IMP: DEN9297: Disinfection implementation [ Disinfection Messages ] [0x9A]

- The UI application was refusing to send the message 0x9A, and the type of the message to be sent should change to U32 to work since FW is using U32 for bool.

- -1
- +5
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 2 more files in changeset.

1:01 pm

Tiffany Mejia

More
51bfd04
changed 5 files
DEN-13226_UI_Unit_Testing

Latest Unit testing modules

- -20
- +24
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 4 more files in changeset.

8:47 pm

Behrouz NematiPour

More
35db011
changed 10 files
master, @Environement_Swith and 190 more UI-DEN-13198-1

DEN-13645: IMP: Unhandled messages duplicate keys fix

- it has been observed that the unhandled messages are not logged correctly and turned out it is because of the Types of each parameter used as keys and keys can't be duplicate by default which caused issue for the unhandled messages, since they may have 6 parameter and all with F32 type which then becomes one parameter of type F32.

- an attribute has been defined for the config file with the format:

#--duplicate_key_on

#--duplicate_key_off

to allow or disallow the duplicate key at any point in the config file.

- Note that the save config parameters are always unique key like AlarmVolume which doesn't make sense to have duplicate entry.

- -4
- +4
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 9 more files in changeset.

5:11 pm

Behrouz NematiPour

More
465a935
changed 28 files
master, @Environement_Swith and 190 more UI-UCOMMITS-4 UI-DEN-13198-1

DEN-13645 IMP: DEN-12958: UI shall generate the POST fail alarm if the SD-Card not present and stop logging

__________

- Log Export

- Added the Alarm generation on the GuiController if SD-Card is not ready, or is/becomes read-only.

- AlarmGenerator

- Added the SD-Card failure alarm - ALARM_ID_UI_POST_FAILURE_SDCARD

- Added alarm clear - ALARM_ID_NO_ALARM

- Added a flag to stop logging if the SD-Card is not ready or is readonly.

- Removed pause on log clean up.

- Improved the DeviceController SD-Card, USB status detection.

- Fixed and improved the MVC connection betweein device/Application/Gui controllers.

- A CLI switch ( -S ) added to disable the feature that is disabling the log if the SD-Card doesn't exist. So if the -S switch is used while calling the denali application, the logging will NOT be disabled, if SD-Card fails.

- In the ExportButton and USBButton(eject) removed the enable logic and has to be done outside of the component. It has been done for the Settings/export and Post-Tx/Review.

- Added title and file count for each SD-Card and USB-Drive panels.

__________

- Run.sh

- Added a check for the CloudSync and if the folder doesn't exist it won't do the rest

- Kill the denali application, in case it is still running.

- Added SD-Card type as part of its detection and if it is not ext4 format it fails the test.

- Optimized the mount point detection.

__________

- NoCANBus

- added the NoCANBus to the fault and init modes to not to navigate to those if NoCANBus is true. Otherwise it conflict with navigate to the home.

- Added a log in case the NoCANBus is enabled.

__________

- Settings

- Converted the '\n' in the settings values to actual newline character.

__________

- Thread:

- Moved the QuiController in its own thread, _Gui_Thread.

__________

- Alarms

- Added an emit to update the Alarm Dialog with the latest title/message, received from Alarms.conf In case there was an alarm before even Alarm.conf is read.

- -13
- +13
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 27 more files in changeset.

2:03 am

Behrouz NematiPour

More
7ebc073
changed 12 files
master, @Environement_Swith and 190 more UI-UCOMMITS-3

DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

- -1
- +1
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 11 more files in changeset.

2:59 am

Behrouz NematiPour

More
6f2622b
changed 19 files
master, @Environement_Swith and 190 more UI-UCOMMITS-3 UI-UCOMMITS-4 UI-DEN-13198-1

DEN-13489 IMP: General Implementation

DEN-13035: Update alarm body messages

- Removed the exclamation mark icon form the Alarm Dialog.

- Removed the exclamation mark icon form the Alarm Bar.

- Made the whole AlarmDialog title bar doubleClick and diagnostics opener if the alarm is not minimizable.

- Moved the Alarm ID from title to the bottom left of the dialog with format: "ID:<id>".

- Clipped the AlarmDialon body message area, crop the text if longer than dialog area.

- Changed the "settings" property name of the VSettings to "instructions".

- Changed the date/time formats keys to simplify the code and conf file.

- Implemented the Alarm Body messages, to load from Alams/Alarms.conf, instead of the FW.

- The FW texts/documents will still being used if the Alarms.conf doesn't have a definition.

- A instruction base capability has also been added to the MVC, but UI still not supporting it.

- -3
- +3
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 18 more files in changeset.

6:15 pm

Behrouz NematiPour

More
a5fe0c9
changed 6 files
master, @Environement_Swith and 190 more UI-DEN-13198-1

DEN-13199: INT: DVT Support

- During DVT support found out the BCuff vitals debug item on the top of the screen is not working, and fixed ti by adding a real time version of the same actual vital properties which gets updated every time the vitals received.

- -7
- +7
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 5 more files in changeset.

7:40 pm

Behrouz NematiPour

More
86e9dfb
changed 45 files
master, @Environement_Swith and 195 more UI-DEN-12716-2 UI-UCOMMITS-3

DEN-13134: IMP: General Implementation for any bugs and any other implementations

DEN-12836: Treatment Report/log export modifications

- Improved the SDItem and renamed to SDCProgressItem.

- Added another separate progress circle component for the USB Driver [USBProgressItem]

- Adding Space check for USB as well to get the USBProgressCircle update.

- Optimized ExportButton and added two size for Settings screen(normal) and Treatment Review screen(small)

- Improved USB button comonent

- Added a global byte size converter in Variable.qml

- Improved MainMenu component

- Added a notification for the TreatmentFlowBase.qml main component.

- Used the notification of the TreatmentFlowBase.qml for the Treatment Review Screen Log export to display feedback to the user.

- Added an individual screen for the log export.

- Removed the Export Log and USB eject from the main settings option screen.

- Added an option for the Export log on the settings home screen which is currently enabled for non-service users too.

- Fixed the DGVersionResponse, log message.

- Put a comment in the FileHandler.cpp about the Qt API QStorageInfo::mountedVolume() which seems so slow on detecting mounted volumes when a USB derive is just plugged in (It could be system issue, since it has also been observed from shell console.)

- Added error handling to the Treatment Log/Report export

DEN-12726: Denali application crashing

- Modified the Logger Maxusage limit to keep 50% of the data/event log and 15% of the service log and keep 35% free, after the log clean up triggered by 15% free storage detected.

DEN-13051: Encounter alarm 6 and SD card detection problem after updating UI version

DEN-13156: Settings screen menu should disappear on service mode

- Improved the MainStack.qml navigation rules.

- Improved the Patient ID keyboard handling, to hide the keyboard, when not on the screen.

- Improved the SettingsStack.qml navigation rules.

DEN-13128: KBM: Cloud Sync Integration

- Saving the CS log in UTC timezone.

DEN-13127: LTS: Development Support

- Fixed the issue found on the End-Treatment screen Confirm button which didn't respect the last instruction page enable only rule.

- -5
- +5
/AlarmMapping.csv
- History
- Source
- Diff
/AlarmMapping.csv
… 44 more files in changeset.

AlarmMapping.csv

Stats

Commits this week: 0

Commit Activity

52 week commits volume

Commits by day

Commits by hour

Commit calendar

Most active committers (90 days)

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Tiffany Mejia

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Tiffany Mejia

Behrouz NematiPour

Behrouz NematiPour

Tiffany Mejia

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour

Behrouz NematiPour