GuiController.h

Clone Tools
  • last updated a few seconds ago
Constraints
Constraints: committers
 
Constraints: files
Constraints: dates
DEN-16326: UI: Add the OS Version in the information screen

- Added the Gui and MVC

  1. … 9 more files in changeset.
DEN-14190: Added - DFF: Improvement: Export individual log files [Demo Feedback Follow Up]

The canceling of single/multiple selection log file exporting

Corrected USB space check function logic

  1. … 8 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 14 more files in changeset.
DEN-15487: Updated - UI: POST: UI needs to report an error if the configuration files, or parameter(s) are missing.

DEN-16104: UI: Reorder the sequence of the messages in POST from UI to HD

  1. … 13 more files in changeset.
DEN-15487: Updated - UI: POST: UI needs to report an error if the configuration files, or parameter(s) are missing.

Updated with changes per CR request

  1. … 4 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 73 more files in changeset.
Merge branch 'DEN-15279-UI-BN-S97-Cybersecurity' into staging

  1. … 115 more files in changeset.
DEN-13474: Updated - UI: SRSUI for SD-Card/File System Write Failure & Export Log Failure may be Outdated from PRS (SRSUI 1077-1079)

Remove unncessary signal transfer to GUIController from AppController

  1. … 3 more files in changeset.
DEN-13474: Added - UI: SRSUI for SD-Card/File System Write Failure & Export Log Failure may be Outdated from PRS (SRSUI 1077-1079)

Added code to emit an alarm to HD when the i/o operations fail (ie: write/read to SD or exportlog)

  1. … 6 more files in changeset.
DEN-15737 UI: Call the lockdown.sh before quits

- DEN-15402 is disabled for now, just to release the Cybersecurity release

# I set to always enabled for now to always go to the manufacturing mode

# 1 - Even for normal setup start is moving files to /home/root, so the lockdown needs to run to move files.

# 2 - The UI still needs to be executed to decrypt the /var/configurations, otherwise the configurations can not be updated,

# and I don't have the ability to just decrypt and exit right now.

# Note: after the Cybersecurity release I will improve the user experience and will make it easier for manufacturing.

  1. … 13 more files in changeset.
DEN-15400: UI: Cybersecurity: UI needs to auto generate the password for the Encrypted partition

- Fixed the Service password using the fixSalt

- //TODO: it needs to be appended to make ti less appear

- //TODO: work on the Encrypted Partition

  1. … 22 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 608 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 46 more files in changeset.
DEN-13966 Improvement: Export individual log files

- Used the stashed file copy by by chunk algorithm which I wrote before for exporting the log files.

- It will help later to have more control over copying files.

- Added all the signal/slots for Logger, ApplicationController, GuiController, GuiView and the QML side.

- Implemented the Export Selection Map on the C++ side to be used for individual log file selection (insert, delete, select, remove/Clear).

- Added percent update for the current exporting file. (not implemented on UI, due to some issues)

  1. … 18 more files in changeset.
DEN-13966: Improvement: Export individual log files

DEN-14044: IMP:

- Adding the type GuiStringIndexMap=QMap<quint32, QString> to the signal/slot system.

  1. … 10 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 95 more files in changeset.
DEN-13645 IMP: DEN-12958: UI shall generate the POST fail alarm if the SD-Card not present and stop logging

__________

- Log Export

- Added the Alarm generation on the GuiController if SD-Card is not ready, or is/becomes read-only.

- AlarmGenerator

- Added the SD-Card failure alarm - ALARM_ID_UI_POST_FAILURE_SDCARD

- Added alarm clear - ALARM_ID_NO_ALARM

- Added a flag to stop logging if the SD-Card is not ready or is readonly.

- Removed pause on log clean up.

- Improved the DeviceController SD-Card, USB status detection.

- Fixed and improved the MVC connection betweein device/Application/Gui controllers.

- A CLI switch ( -S ) added to disable the feature that is disabling the log if the SD-Card doesn't exist. So if the -S switch is used while calling the denali application, the logging will NOT be disabled, if SD-Card fails.

- In the ExportButton and USBButton(eject) removed the enable logic and has to be done outside of the component. It has been done for the Settings/export and Post-Tx/Review.

- Added title and file count for each SD-Card and USB-Drive panels.

__________

- Run.sh

- Added a check for the CloudSync and if the folder doesn't exist it won't do the rest

- Kill the denali application, in case it is still running.

- Added SD-Card type as part of its detection and if it is not ext4 format it fails the test.

- Optimized the mount point detection.

__________

- NoCANBus

- added the NoCANBus to the fault and init modes to not to navigate to those if NoCANBus is true. Otherwise it conflict with navigate to the home.

- Added a log in case the NoCANBus is enabled.

__________

- Settings

- Converted the '\n' in the settings values to actual newline character.

__________

- Thread:

- Moved the QuiController in its own thread, _Gui_Thread.

__________

- Alarms

- Added an emit to update the Alarm Dialog with the latest title/message, received from Alarms.conf In case there was an alarm before even Alarm.conf is read.

  1. … 27 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-12836: Treatment Report/log export modifications

  1. … 11 more files in changeset.
DEN-13645: IMP: General Implementation

DEN-13447: UI able to send its final POST result to HD by request

  1. … 11 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 159 more files in changeset.
DEN-12424: INT

- Adding the new 3 params of the alarm trigger

- Adding Rejection

- prepare for the singletons quit which are not in order, the quit should be done manually to be in order.

  1. … 20 more files in changeset.
Bamboo Commit: Updated the Copyright section and replaced tabs with 4 spaces

  1. … 584 more files in changeset.
Delayed Checkin

- The delayed check-in idea, tested.

- The idea is that the UI is not ready when sending the check-in so delay the check-in to the point that GUI is loaded and can notify that it's ready and check-in and post can start.

- :: It didn't work.

- Some other timestamps were added to the code to get the time between the time message was sent. and UI receiving it, which is the 1.200 s between when the HD sends UI Version Req and when UI actually receives it, which is the root cause of the issue.

  1. … 14 more files in changeset.
DEN-9649: Implementation - Yocto configuration

- Addressed some frequent code review comments

- Fixed the UI POST AlarmTriggered message

- Added the deleteLater for the QQuickViewer pointer _viewer.

  1. … 114 more files in changeset.
DEN-8920 Implementation [Store Collected Data]

- Added MVC

- Added the TxLog and Log_Events and so...

- Added the timeout/interval

- ....

  1. … 14 more files in changeset.
DEN-8523: Bluetooth cuff

- Although there is not specific Bluetooth setting appear here but the entire idea here is to prepare the application to have a better platform for device handling like Bluetooth and the other ones.

  1. … 21 more files in changeset.
DEN-8533 & DEN-8693

Merge and support

  1. … 44 more files in changeset.
Merge master into staging

  1. … 37 more files in changeset.
DEN-6619: Implementation

- Added a signal named didSDCardSpaceTooLow in the DriveWatcher which will be triggered when the free storage space available on the SD-CARD is less than 10%. (No action on UI happens currently)

- Added a flag in DriveWatcher to stop emitting the Logger while it is cleaning the Logs [[ IMPORTANT : is is handled by signal/slots for thread synchronization and safety ]].

- Added a function to find the total size of the file in a path.

- Added find function to find files with a list of filter in a path.

- Added an overloaded version of find to help find the files in a path which are exceeding the storage limit from the oldest files.

- Added error check in the read overloaded which works with Json.

- Re-implemented the FileHandler::removeLogs to clean up the logs by % instead of date.

- Removed unused global log paths from StorageGlobal.

-

  1. … 15 more files in changeset.
DEN-5515: Added VAlert class to support BLE related alerts

  1. … 24 more files in changeset.